Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Making coffee with milk
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray and grounds container
- Drip tray cover
- Water container
- Stainless steel water intake valve filter
- Main dispenser with cappuccinatore
- Stainless steel milk flask
- Milk pipework
- Bean container and ground coffee chute
- Housing
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework with the maintenance program
- Degreasing the brew unit and cleaning inside
- Descaling the machine
- Frequently Asked Questions
- Transport
- Technical Service
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Settings
48
Factory default setting
You can reset the settings back to the
ones which were set when the coffee
system was delivered - the factory de-
fault settings.
The number of drinks and the appliance
status (No. of drinks until ...) cannot be
reset.
Please refer to the "Setting options"
chart for the factory settings that are
shown in bold.
The following settings will not be re-
set:
– Language
– Time of day
Showroom program (Demo
mode)
Do not activate this setting for domes-
tic use.
The coffee system can be presented in
Miele Showrooms of retail stores with
the Showroom program function. The
lighting will come on, but drinks cannot
be dispensed and other actions cannot
be carried out.
If you activate the Demo mode, you
cannot turn the appliance off with the
On / Off button .