Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Making coffee with milk
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray and grounds container
- Drip tray cover
- Water container
- Stainless steel water intake valve filter
- Main dispenser with cappuccinatore
- Stainless steel milk flask
- Milk pipework
- Bean container and ground coffee chute
- Housing
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework with the maintenance program
- Degreasing the brew unit and cleaning inside
- Descaling the machine
- Frequently Asked Questions
- Transport
- Technical Service
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Frequently Asked Questions
67
Message Possible cause and solution
F73 or
Check the brew unit
The brew unit cannot be positioned correctly.
Turn the appliance off with the On / Off button.
Remove and clean the brew unit (see "Removing
the brew unit and cleaning it by hand").
Push the coffee ejector of the brew unit into the
correct position (see diagram).
Do not insert the brew unit. Close the appliance
door and turn the appliance on with the On/Off
button .
This will initialize the brew unit motor and put in back
into the start position.
When Insert the brew unit appears in the display,
open the appliance door and put the brew unit
back in the appliance. Then close the door.