Operating instructions Coffee machine To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Caring for the environment Packaging material The packaging material used protects the machine during transportation. Please retain the original box and polystyrene pieces so that you can pack the machine securely, should you need to transport it in the future. Disposing of your old appliance Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety.
Contents Caring for the environment .............................................................................. 2 Warning and Safety instructions...................................................................... 6 Product description .......................................................................................... 15 Controls and indicators .................................................................................... 17 Operation....................................................
Contents Parameters......................................................................................................... Displaying and changing parameters .................................................................. Portion size.......................................................................................................... Ground quantity................................................................................................... Brewing temperature ...............................
Contents Cleaning by hand or in the dishwasher ............................................................... Unsuitable cleaning agents ................................................................................. Drip tray and waste container ............................................................................. Cleaning the drip tray cover ................................................................................ Water container ..........................................................
Warning and Safety instructions This coffee machine complies with all the stipulated safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on the installation, safety, use and maintenance of the appliance. This prevents both personal injury and damage to the coffee machine.
Warning and Safety instructions Correct application This coffee machine is intended for home use. This coffee machine is not intended for outdoor use. This coffee machine must not be used at altitudes above 2000 m. It must only be used as a domestic appliance to make espresso, cappuccino, latte macchiato, tea etc. Any other use is not permitted.
Warning and Safety instructions Safety with children Danger of burning and scalding on the dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts. Install the coffee machine where it is out of the reach of children. Children under 8 years of age must be kept away from the coffee machine and the mains connection cable and plug/socket.
Warning and Safety instructions Technical safety A damaged coffee machine is dangerous. Check it for any visible damage before setting it up. Never attempt to use a damaged coffee machine. To avoid the risk of damage to the machine, make sure the connection data (voltage and frequency) on the data plate corresponds to the household supply, before connecting the machine to the mains supply. Consult a qualified electrician if in any doubt.
Warning and Safety instructions Danger of overheating. Please ensure that there is adequate ventilation around the coffee machine. Do not cover the coffee machine with tea towels etc. while it is in use. If the coffee machine is installed behind a closed furniture front, it may only be used with the furniture door open (see “Installation” for the minimum niche size). Heat and moisture can build up behind the furniture front when closed. This can result in damage to the appliance and/or furniture unit.
Warning and Safety instructions Correct use Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the spouts. Ensure that the central spout is clean and fitted correctly. Water in the drip tray can also be very hot. Take care when emptying it. Danger of injury to the eyes.
Warning and Safety instructions Do not use coffee beans which have been treated with caramel, sugar or other substances including sugary liquids. Sugar will damage the coffee machine. Only fill the coffee chute with ground coffee beans. Do not use any caramelised ready ground coffee. The sugar in the coffee will stick to and block the brew unit of the coffee machine. The cleaning tablets for degreasing the brew unit will not remove this type of deposit. Only use milk without additives.
Warning and Safety instructions Cleaning and care Refer to the relevant instructions in “Cleaning and care”. Clean the coffee machine and the milk flask (supplied as standard, depending on model) daily, particularly before using for the first time. All parts of the milk system need to be cleaned thoroughly and regularly. Milk contains bacteria which proliferate rapidly with inadequate cleaning. Do not use a steam cleaner to clean this machine.
Warning and Safety instructions For machines with stainless steel surfaces: Do not use sticky notes, adhesive tape, masking tape or other types of adhesive on the stainless steel surfaces. Stainless steel surfaces are susceptible to scratching. Even magnets can cause scratches.
Product description a Hot-water spout i Height-adjustable central spout b Control panel c Cup heater* j Drip tray with lid and waste container d Water container k Milk pipework aperture e Ground coffee chute l Lower panel with drip tray cover f Bean container * depending on model: CM 6360, CM 6560 g Grinder setting (behind the appliance door) h Brew unit (behind the appliance door) 15
Product description a Milk flask* b Milk siphon c Milk pipework with rinse valve * depending on model: CM 6360, CM 6560 16
Controls and indicators a On/Off button g “DoubleShot” sensor For switching coffee machine on and For making a particularly strong and off aromatic coffee by using twice as much ground coffee but the same b Display amount of water For showing information about the c Drink buttons For making drinks h OK sensor For confirming display messages and saving settings d Optical interface (For Miele Customer Service Department only) i Arrow buttons For scrolling through lists, selecting entries or changin
Controls and indicators Drink button symbols Espresso Coffee Long coffee Cappuccino Latte macchiato Espresso macchiato Tea water 18
Operation Sensors To operate the coffee machine, touch the sensors with your finger. An audible signal is generated each time a sensor is touched. You can adjust the volume of the signal tones or switch the tones off (see “Settings – Volume”). Drinks menu When the following appears in the display, you are in the drinks menu: Select drink. You will then be able to start an action or change settings in the menu.
Operation Symbols in the display The following symbols may also appear in the display in addition to the text: Symbol Explanation This symbol indicates the “Settings” menu and the “Language” menu option. This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information. This symbol appears if the system lock is activated. Operation is locked. The TeaTimer minute minder has been started (see “Tea – TeaTimer”).
Miele@home Your coffee machine is equipped with an integrated WiFi module. In order to use it, you will need: - A WiFi network - The Miele@mobile app - A Miele user account The user account can be created via the Miele@mobile app. Availability of the WiFi connection The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures.
Before using for the first time Before using for the first time Selecting the display language Remove any notices from the machine. Select the desired display language. You might also be asked for your location. Setting up the network (Miele@home) You can connect your coffee machine to your home WiFi network. The following appears in the display during set-up: Set up Miele@home Tip: You can also choose to set up Miele@home for your coffee machine at a later point. In this case, select Skip.
Before using for the first time Selecting the Performance mode You can select the appropriate mode to suit your personal preferences (see “Settings – Performance mode”). - Eco mode: This is an energy-saving mode. - Barista mode: This mode has been optimised for unadulterated coffee enjoyment. - Latte mode: In this mode, milkbased drinks can be prepared within a much shorter space of time. Switch the coffee machine off with the On/Off button . Do not unplug the power plug to switch off the coffee machine.
Filling the water container Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day. Risk of damage due to incorrect operation. Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine. Bottled mineral water leaves too much limescale in the coffee machine. Only use cold, fresh tap water to fill the water container.
Filling the coffee bean container Coffee or espresso can be made from whole roasted coffee beans which are freshly ground in the coffee machine for each portion. This requires the coffee bean container to be filled with coffee beans. Alternatively, you can make coffee drinks with ready ground coffee. Risk of damage to the grinder due to incorrect operation.
Switching on and off Switching the coffee machine on Switching the coffee machine off Touch the On/Off button . Touch the On/Off button . The coffee machine heats up and rinses the pipework. Hot water will run out of the central spout. If coffee has been dispensed, the coffee machine will rinse the pipework automatically before switching off. When Select drink appears in the display, you can make drinks.
Cup heating (depending on model: CM 6360, CM 6560) Pre-heating cups Cups should always be pre-heated to allow the flavour of the coffee to develop and be retained. The smaller the volume of the coffee/ espresso and the thicker the cup, the more important it is to pre-heat the cup. You can pre-heat cups or glasses on the cup heating surface on the top of the coffee machine. When the cup heating surface is activated, the cup rest will be heated continually until the coffee machine is switched off.
Adjusting the central spout to the correct cup height You can adjust the central spout to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. Pull the central spout down until it is at the same level as the rim of the cup. Alternatively, push the central spout up until there is enough room to fit a larger cup or mug underneath.
Making drinks Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. Making coffee with and without milk The following drinks can be made: - Ristretto is a strong, concentrated espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water.
Making drinks Milk preparation Milk or milk alternatives (e.g. soya milk) containing added sugar can clog up the milk pipe and the rest of the milk pipework. Residues from unsuitable liquids can interfere with milk preparation. The milk used must not contain any additives. Only use pasteurised cow's milk. If you have not made any milk drinks for a while, rinse the milk pipework thoroughly before making the first drink.
Making drinks Using a milk carton with the milk siphon Connect the milk pipework to the aperture in the central spout. The milk siphon enables you to prepare milk directly from milk cartons or other suitable containers. Tip: Rinse the milk siphon under running water after use. The milk flask depending on model: CM 6360, CM 6560 Milk is not cooled in the milk flask. For high-quality milk froth, always use cold milk (< 10 °C). First insert the connecting piece onto the long stainless steel tube.
Making drinks Connect the stainless steel tube to the inside of the lid. Make sure that the slanted end of the stainless steel tube is pointing downwards. Making a coffee Fill the milk flask with milk up to a maximum of 2 cm below the rim. Seal the milk flask with the lid. Place a cup under the central spout. Select a drink: touch the sensor control for the drink you want. Or select a drink from the Further | Other drinks menu ( sensor control).
Making drinks DoubleShot can be activated for all drinks apart from “Ristretto”. Making a DoubleShot of coffee Press the sensor control immediately before or after you start making a drink. Coffee pot You can make several cups of coffee one after the other automatically with the Coffee pot function (maximum of 1 litre). The drinks menu is displayed. Dispensing starts and the sensor control lights up. 2 portions of coffee beans will be ground and brewed.
Making drinks Making coffee drinks with ground coffee Close the coffee chute. To make drinks using ready ground coffee, add a portion of ground coffee to the ground coffee chute. This allows you to make a decaffeinated coffee if the bean container is already filled with regular coffee beans, for example. The following appears in the display: Use ground coffee? Only 1 portion of coffee or espresso can be made at a time when using ready ground coffee. Place a cup under the central spout.
Making drinks Tea The coffee machine is not intended for commercial or scientific purposes. Temperatures given are approximate and can vary according to ambient conditions. To make tea, you can select from the following options: - Japanese tea is a high-quality green tea which boasts a fine, fresh, “green” taste. Dispensed temperature: approx. 65 °C, brewing time: approx. 1,5 minutes - White tea is a green tea where only the young buds of the tea plant are used and processed very gently.
Making drinks of water according to the type of tea and the size of the cup (see “Portion size”). Pour loose tea into a tea filter or similar, or take a tea bag from the packet. TeaTimer Place the tea filter or the tea bag in the tea cup. You can use the TeaTimer function to start a minute minder when making tea. There is a preset brewing time for the type of tea selected. You can adjust the preset brewing time (up to a maximum of 14:59 minutes). The changed brewing time is saved.
Making drinks After the brewing time has elapsed, a buzzer will sound and the symbol will flash. Remove the tea filter or tea bag when the desired brewing time has elapsed. Dispensing warm or hot water Danger of burning and scalding on the hot water spout. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components.
Expert mode The Expert mode function allows you to change the portion size while the drink is being made. The setting will not be saved and will only apply for the current drink. Switching Expert mode on and off The drinks menu is displayed. Touch the sensor. Select Settings | Expert mode. Select the option you want. Confirm with OK. The setting is now saved. Expert mode: changing the portion size The drinks menu is displayed.
Grinder setting When the beans are ground correctly, the coffee or espresso will flow evenly into the cup with a good crema. The crema should have an even hazelnut brown colour. The grinder setting you select will be used for all coffee drinks. There are various ways to tell whether the coffee grinder is set correctly.
Parameters Displaying and changing parameters You can change the portion size for all drinks. In addition, you set the quantity of coffee, the brewing temperature and pre-brewing for each coffee drink individually. Touch and then select Parameters. Select a drink and confirm with OK. The parameters that can be changed for this drink are displayed. Once you have selected a drink, the current settings for the following appear: Amount of coffee, Brew temperature and Pre-brewing.
Parameters Tip: For the drinks pictured on the control panel, you can change the portion size by pressing and holding the button down while the drink is being dispensed. To do this, keep the drinks sensor pressed until the machine starts dispensing. During dispensing, Save appears in the display. Brewing temperature The ideal brewing temperature will depend on - the type of coffee being used, - whether an espresso or a coffee is being made, and - the air pressure in the region.
Profiles In addition to the Miele drinks menu (Miele profile), you can create individual profiles to cater for different tastes and preferences. Within the profile, you can adjust the portion sizes and parameters individually for all drinks. Tip: It is best to select short names. The profile has been created. Making drinks stored in a profile Touch the sensor control and select Profiles. Confirm with OK. The name of the current profile is shown in the top left of the display.
Profiles - Manual: The selected profile will remain active until you select another one. - After each use: The machine will revert to the Miele profile whenever a drink is dispensed. - When switched on: The Miele profile will be displayed whenever the coffee machine is switched on, regardless of which profile was selected before the machine was last switched off. Select Change profile and confirm with OK. Select the option you want and confirm with OK.
MobileStart With MobileStart you can, for example, start making a drink via the Miele@mobile app. You will only be able to use MobileStart if Miele@home has been set up for your coffee machine. Danger of burning and scalding on the dispensing spouts. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the central spout or touch hot components.
Settings Displaying and changing Settings Volume The drinks menu is displayed. You can set the volume of the buzzer and keypad tones (segment bar). Touch the sensor control. Display brightness Select Settings and touch OK. You can set the display brightness (segment bar). Select the menu option that you want to display or change. Confirm with OK. Change the setting as required and confirm with OK.
Settings Eco mode Eco mode is an energy-saving mode. The system does not heat up until someone starts making a drink. Barista mode This performance mode has been optimised for unadulterated coffee enjoyment. Users can enjoy coffeebased drinks without any delay as the coffee machine remains heated to the brewing temperature. This mode consumes more energy than Eco mode. Latte mode This performance mode has been optimised for preparing milk.
Settings Water hardness °dH mmol/l Calcium content mg/l Ca 2+ Setting s or ppm (mg Ca Water hardness °dH mmol/l 2+ /l) Calcium content mg/l Ca 2+ Setting s or ppm (mg Ca 2+ /l) 7 1.3 50 7 36 6.4 257 36 8 1.4 57 8 37–45 6.6–8.0 258–321 37–45 9 1.6 64 9 46–60 8.2–10.7 322–429 46–60 10 1.8 71 10 61–70 430–500 61–70 11 2.0 79 11 10.9– 12.5 12 2.1 86 12 13 2.3 93 13 14 2.5 100 14 15 2.7 107 15 16 2.9 114 16 17 3.0 121 17 18 3.
Settings - Deactivate*/Activate*: The settings for the WiFi network are retained, but the network is switched on or off. - Connection status*: Information about the WiFi connection is displayed. The symbols indicate the strength of the connection. - Set up again*: The settings for the current WiFi network will be reset. The WiFi connection will be set up from scratch. - Reset*: The WiFi is switched off and the settings for the current WiFi network will be reset.
Settings You can install the update immediately or postpone this until later. When the coffee machine is switched on again, you will be reminded about the update. Deactivate RemoteUpdate if you do not want to install the update. The update may take several minutes. Please note the following information about the RemoteUpdate function: - You will only receive a message when an update is available. - Once an update has been installed, it cannot be undone.
Cleaning and care Risk to health due to inadequate cleaning Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Cleaning by hand or in the dishwasher The brew unit is not dishwasher safe. Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent. The following components must be cleaned by hand only: - Central spout stainless steel cover - Brew unit - Water container lid - Bean container lid - Lower panel Risk of damage as a result of excessively high dishwasher temperatures. Components may be ruined (e.g.
Cleaning and care Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Drip tray and waste container a Clean the drip tray and waste container every day to avoid unpleasant smells and mildew. The waste container is located in the drip tray. Water from rinsing also collects in the waste container. A prompt will appear in the coffee machine display when the drip tray and/ or the waste container is full and needs to be emptied. Empty the drip tray and the waste container.
Cleaning and care Cleaning the drip tray cover Remove the drip tray cover. The drip tray cover can be cleaned in the dishwasher, or by hand using warm water and a little washing-up liquid. Dry the drip tray. Remove the lid from the container and wash it by hand. The water container can be cleaned in the dishwasher, or by hand using hot water and a little washing-up liquid. After cleaning, dry the water container. Refit the drip tray.
Cleaning and care Removing and cleaning the water container filter Clean the water container filter once a month. The water container filter is located under the water container. Remove the water container. Unscrew the cap. Remove the sealing ring and the filter. Rinse all parts carefully under running water. - Use the supplied cleaning brush for parts that are difficult to reach, e.g. in the dispensing unit.
Cleaning and care Clean the surfaces of the central spout with a damp cloth. Pull off the upper silicone section with the aperture for the milk pipework . The grey silicone section contains a black, cylindrical component . Pull out the black component. Remove the dispensing spouts . Clean all parts thoroughly. To effectively remove coffee deposits, clean the coffee pipework with the cleaning brush once a month. Angle the cleaning brush slightly and clean both spouts from above and below.
Cleaning and care Refit the dispensing unit onto the central spout. Replace the stainless steel cover and connect the milk pipework if required. Cleaning the steam jet Clean the steam jet once a month. Push the central spout right down and remove the stainless steel cover by pulling it off towards you. Remove the dispensing unit to the front. Tip: The “seam” on the milk pipework and on the central spout makes it easier to assemble. Push the cleaning brush a max. of 1 cm into the steam jet.
Cleaning and care Cleaning the milk pipework and rinse valve Risk of damage due to incorrect cleaning. The silicone plug can be damaged by pointed objects, e.g. also the cleaning brush, and stop working. Do not use pointed objects, e.g. a needle, for cleaning. Only clean the silicone plug under running water and/or in the dishwasher. Do not use the cleaning brush supplied with the appliance. Use the brush to clean the rinse valve body under running water to remove any milk residues.
Cleaning and care Tip: Alternatively, you can soak the individual components overnight in water and washing-up liquid. Rinse the components under running water afterwards. Cleaning the milk flask Clean the milk flask every day in a dishwasher or by hand using warm water and a little washing-up liquid. Unscrew the lid from the milk flask and remove the stainless steel tube. Place all milk flask components in a dishwasher. Rinse the milk pipework and the rinse valve body under running water.
Cleaning and care Danger of injury from the grinder! Clean the appliance front with a clean soft sponge and a solution of warm water and washing-up liquid. Then wipe it all dry using a soft cloth. Switch off the machine and disconnect it from the power supply before cleaning the bean container. Tip: You can also clean the appliance casing with the Miele all purpose microfibre cloth.
Cleaning and care Select Maintenance | Rinse the milk pipework and confirm with OK. Place rinsing valve in drip tray will appear on the display. Remove the water container. Fill it with cleaning solution (see Operating instructions) and replace it. will appear in the display. Preparing the cleaning solution For optimal cleaning results, we recommend Miele cleaning agent for milk pipework.
Cleaning and care Degreasing the brew unit and cleaning the interior Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. We recommend using Miele cleaning tablets to clean the brew unit. These have been specially developed for degreasing the brew unit in Miele coffee machines and prevent subsequent damage.
Cleaning and care Carefully pull the brew unit out of the coffee machine. When you have removed the brew unit, do not change the position of the handle on the brew unit. Clean the brew unit by hand under warm running water without using cleaning agent. Clean the inside of the coffee machine. Make sure that the areas highlighted in the illustration are cleaned especially well. Tip: Use your vacuum cleaner to remove dry ground coffee residues.
Cleaning and care Descaling the machine Risk of damage from spilt descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages of descaling agent immediately. Press the button under the handle of the brew unit and, whilst doing so, turn the handle to the right . Close the appliance door. Follow the further instructions given in the display. The cleaning process is complete when the drinks menu appears. Limescale builds up in the coffee machine through use.
Cleaning and care Descale the appliance will appear on the display. The cleaning process cannot be cancelled. It must be completed through to the end. Confirm with OK. Miele descaling tablets are available to order via the Miele webshop, from the Miele Customer Service Department (see the end of this booklet for contact details) or from your Miele dealer. You will need 1 descaling tablet to descale the machine. The process will start. Follow the instructions in the display.
Cleaning and care Remove the water container and rinse it thoroughly with clean water. Ensure that no descaling solution residue remains in the water container. Fill the water container at least up to the mark with fresh tap water. The descaling process is complete when the drinks menu appears.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. Messages in the display Error messages must be confirmed with OK, otherwise the message can reappear in the display even though the problem has been remedied.
Problem solving guide Problem Cause and remedy F73 or The brew unit cannot be positioned correctly. Switch the coffee machine off with the On/ Off button . Switch off at the wall socket and unplug the coffee machine. Wait for two minutes before inserting the plug back in the socket and switching on. Remove the brew unit and rinse under warm running water. Check the brew unit Push the coffee ejector of the brew unit into the correct position. Do not fit the brew unit.
Problem solving guide Problem Too much ground coffee Cause and remedy There is too much ground coffee in the ground coffee chute. The brew unit cannot compact ground coffee if more than 12 g (2 level spoonfuls) of ground coffee are added to the coffee chute. The ground coffee will be emptied into the waste container and the fault message will appear in the display. Switch the coffee machine off with the On/Off button .
Problem solving guide Unusual performance of the coffee machine Problem Cause and remedy The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough. Touch and hold the On/Off button for at least 3 seconds. The plug is not inserted in the socket correctly. Insert the plug into the socket. The fuse has tripped because the coffee machine, voltage or another appliance is defective.
Problem solving guide Problem Cause and remedy The coffee machine needs descaling. appears after Switch the coffee machine off with the On/ switching on even Off button . Wait approx. 1 hour. though the container is Switch the appliance back on again. As soon as filled and fitted in the Heating-up phase appears, touch the sensor machine. The appliance control and then select Descale the appliance. does not rinse. Descale the coffee machine.
Problem solving guide Problem Cause and remedy Empty the drip tray and the This is not a fault. The drip tray was not properly appears removed and/or replaced too quickly. in the display, even though the drip tray has been emptied. waste container appears in the display even though both are fitted. The drip tray is not in the correct position and is therefore not detected. Empty the drip tray and the waste container.
Problem solving guide Problem Cause and remedy Coffee dispensing is repeatedly interrupted and the message Fill the bean container appears in the display. This is not a fault. The brew unit has not detected the ground coffee. Certain types of coffee produce a small amount of coffee when they are ground. Usually this is because the grinder is set too fine and the minimum quantity of coffee is set. Confirm the message with OK.
Problem solving guide Problem Cause and remedy Coffee is not flowing The central spout has a blockage. out of the central spout. Rinse the coffee pipework (see “Cleaning and care Or coffee is only being – Rinsing the appliance”). dispensed via one Is there still no coffee flowing out of the central spout spout. or is it only dispensed via one side? Dismantle the central spout and clean all parts carefully. Use the supplied cleaning brush for parts that are difficult to reach.
Problem solving guide Problem Cause and remedy The milk sputters when it is dispensed. Hissing noises can be heard when milk is being heated up or frothed. Although the milk should be frothed, only hot milk comes out of the central spout. The milk pipework was not correctly fitted. Pay attention to the seam on the double hose when you connect the milk pipework into the central spout. If you have disconnected the milk pipework from the rinse valve: the double hose has different diameters.
Problem solving guide Problem Cause and remedy Coffee grounds have settled on the lid of the drip tray and in the interior around the brew unit. This is not a fault. The movement of the brew unit during the brewing process can cause some ground coffee to fall around it. The type of beans used, the fineness of the ground coffee and the quantity of coffee ground also affect the quantity. Important! Clean the inside of the coffee machine regularly to prevent mould etc.
Problem solving guide Unsatisfactory results Problem Cause and remedy The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cups, e.g. using the cup heating (depending on model). The brewing temperature has been set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit.
Problem solving guide Problem Cause and remedy The coffee grinder makes a louder noise than usual. The coffee bean container has become empty during the grinding process. Fill the coffee bean container with fresh beans. There may be foreign objects such as plastic or stones in amongst the coffee beans. Switch the coffee machine off immediately. Call Service. The coffee flows too quickly into the cup. The coffee is too coarsely ground. Set the grinder to a finer setting (see “Grinder setting”).
Transporting the machine If you are not going to use the coffee machine for an extended period of time, e.g. whilst on holiday, or if it needs to be moved, a number of procedures will need be carried out to ensure its safety. - Empty and clean the coffee bean container When the display goes out, the machine has finished evaporating. Switch off the coffee machine and unplug it to disconnect it from the power supply. Clean the drip tray and waste container.
After sales service and warranty Contact in the event of a fault Warranty In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. For information on the appliance warranty specific to your country please contact Miele. See back cover for address. You can book a Miele Customer Service Department call-out online at www.miele.com/service.
Accessories These products and other useful accessories can be ordered via the Miele webshop, from Miele (see back cover for contact details) or from your Miele dealer. Accessories supplied - Starter set “Miele appliance care” Various cleaning products are supplied depending on model. Optional accessories Miele accessories and cleaning and conditioning products are available for your coffee machine.
Saving energy The following tips can help you save energy and money as well as care for the environment: - Operate the coffee machine in Eco mode. - Switch the coffee machine off with the On/Off button if it is not going to be used for a while. - Change the setting for the Switch off after timer to 20 minutes. The coffee machine will then switch itself off 20 minutes after the last drink was made or a sensor control was touched.
Electrical connection Before connecting the coffee machine, make sure that the connection data on the data plate (voltage and frequency) matches the mains electricity supply. This data must correspond in order to avoid the risk of damage to the coffee machine. If in any doubt, consult a qualified electrician. The coffee machine must not be used with “energy saving plugs”. These reduce the amount of energy supplied to the machine, causing it to overheat.
*INSTALLATION* Installation Danger of overheating due to insufficient ventilation. If the coffee machine is not sufficiently ventilated, the appliance can overheat. Please ensure that there is adequate ventilation around the coffee machine. Do not cover the coffee machine with tea towels etc. while it is in use. If the coffee machine is installed behind a closed furniture front, heat and moisture can build up behind the furniture front when closed.
*INSTALLATION* Dimensions 85
Technical data Electricity consumption in standby: < 0.1 W Electricity consumption in networked standby: < 0.5 W Pump pressure: Max. 15 bar Through-flow heater: 1 stainless steel thermo block Dimensions (W x H x D): 251 x 359 x 427 mm Net weight: 9.9 kg Connection cable length: 140 cm Water container capacity: 1.8 l Coffee bean container capacity: Approx. 300 g Milk flask capacity: 0.5 l Drip tray capacity: 0.75 l Waste container capacity: Max.
Conformity declaration Miele hereby declares that this coffee machine complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk - For service, information, operating instructions etc: go to www.miele.co.uk/domestic/ customer-information-385.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.miele.com.au China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing' an District 200040 Shanghai, PRC Tel: +86 21 6157 3500 Fax: +86 21 6157 3511 E-mail: info@miele.
CM 6160, CM 6360, CM 6560 en-GB M.-Nr.
