Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Important instructions for use
- Machine description
- Controls and indicators
- Operation
- Miele@home
- Before first use
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Drip tray and grounds container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the main dispenser
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Accessing the Maintenance menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance program)
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Transport
- Service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Before first use
25
Setting the water hardness
Your local water authority will be able
to tell you the hardness of the water in
your area.
More information can be found under
“Settings – Water hardness”.
Enter your local water hardness (in
°dH) and confirm withOK.
Selecting the Performance Mode
You can select the appropriate mode to
suit your personal preferences (see
“Settings – Performance Mode”).
- Eco Mode: This is an energy-saving
mode.
- Barista Mode: This mode has been
optimized for unadulterated coffee
enjoyment.
- Latte Mode: In this mode, milk-
based drinks can be prepared within
a much shorter space of time.
Select the desired mode and confirm
withOK.
Your machine has been successfully set
up and is ready for use.
Confirm withOK.
The coffee machine heats up and rinses
the pipework. The water used for
rinsing will run out of the main
dispenser.
Before preparing milk for the first
time, rinse the milk pipework (see
“Cleaning and care – Rinsing the milk
pipework”).
Please note that the coffee aroma and
the characteristic crema only develops
after the first few coffees have been
made.
To ensure that any coffee residues
from the factory testing process are
removed from the brewing system,
please throw away the first 2cups of
coffee when using the coffee
machine for the first time.
Switch the coffee machine off with
the On/Offbutton. Do not unplug
the power cord to switch off the
coffee machine. If you unplug the
coffee machine from the power
supply while using it for the first time,
you will have to set it up for use
again.
A larger quantity of coffee beans is
ground for the first coffee drinks and
powder from the coffee grounds may
adhere to the lid of the drip tray.