Operating Instructions Countertop Coffee Machine To prevent accidents and machine damage, you must read these instructions before installation or use. en-US M.-Nr.
Caring for the environment Packaging material Disposal of your old appliance The packaging material used protects the machine during transportation. Please retain the original box and polystyrene pieces so that you can pack the appliance securely, should you need to transport it in the future. Electrical and electronic appliances contain valuable materials. They also contain certain substances, compounds and components which were essential for the proper functioning and safe use of the equipment.
Contents Caring for the environment .............................................................................. 2 IMPORTANT SAFETY INSTRUCTIONS ............................................................ 6 Important instructions for use ......................................................................... 10 Machine description ......................................................................................... 17 Controls and indicators .....................................................
Contents Parameters......................................................................................................... Displaying and changing parameters .................................................................. Portion size.......................................................................................................... Amount of coffee................................................................................................. Brewing temperature ................................
Contents Clean by hand or in dishwasher .......................................................................... Unsuitable cleaning agents ................................................................................. Drip tray and grounds container.......................................................................... Cleaning the drip tray cover ................................................................................ Water container ........................................................
IMPORTANT SAFETY INSTRUCTIONS This coffee machine complies with all current safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on the installation, safety, use and maintenance of the appliance. This prevents both personal injury and damage to the coffee machine.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use Do not use appliance for other than intended use. Do not use the coffee machine outdoors. This coffee machine must not be used at altitudes above 6560 ft (2000 m). Persons who lack physical, sensory or mental abilities or experience with the machine should not use it without supervision or instruction by a responsible person.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Danger of burning and scalding at the dispensers. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensers. Keep the coffee system out of reach of children. Keep children away from the coffee machine and the power cord. Children must be aware of the potential dangers caused by incorrect operation.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment. Ensure that the power cord will not be pinched or damaged by any sharp edges. The power cord should not hang down. Someone could trip over it with the risk of injury and the appliance could be damaged.
Important instructions for use Appropriate use This coffee machine is intended for household use. The machine is intended only for household use and for the preparation of drinks such as espresso, cappuccino, latte macchiato, tea, etc. All other types of use are not permitted. Safety with children Remember that coffee and espresso are not suitable drinks for children. Danger of suffocation.
Important instructions for use Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronized with the grid power supply (e.g., island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with national and local codes.
Important instructions for use Repairs and other work by unqualified persons to the appliance and the power cord could be dangerous. The manufacturer cannot be held liable for unauthorized work. Repairs may only be carried out by a Miele-authorized service technician. No user serviceable parts are contained in this appliance. Repairs should be carried out by a qualified technician using genuine Miele Parts. Failure to do so may create a hazardous condition and can result in voiding the warranty.
Important instructions for use This device complies with Industry Canada licence-exempt RSS standard(s) and part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The construction of the device assures that the FCC exposure limits are verifiably met using the integrated WiFi module EK037.
Important instructions for use - Do not use sparkling water. Only fill the bean container with roasted espresso or coffee beans. Do not fill the bean container with coffee beans that have been treated with additives or with ground coffee. Do not pour liquids into the bean container. Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain residual moisture.
Important instructions for use Cleaning and maintenance See “Cleaning and care” for more information. Clean the coffee machine and the milk flask (supplied as standard, depending on model) daily, particularly before using for the first time. All parts of the milk system need to be cleaned thoroughly and regularly. Do not use a steam cleaner to clean this machine. Steam could reach electrical components and cause a short circuit.
Important instructions for use Accessories and parts Only use genuine Miele accessories. If other parts are used, warranty, performance, and/or product liability claims may be invalidated. Miele can only guarantee the safety of the appliance when genuine Miele replacement parts are used. Faulty components should only be replaced by genuine Miele replacement parts.
Machine description a Hot water dispenser b Control panel j Drip tray with lid and grounds container c Cup heating* k Milk pipework opening d Water container l Lower panel with drip tray cover e Ground coffee chute * depending on model: CM 6360, CM 6560 f Bean container g Grinder setting (behind the service panel) h Brew unit (behind the service panel) i Height-adjustable main dispenser 17
Machine description a Milk flask* b Milk siphon c Milk pipework with rinse valve * depending on model: CM 6360, CM 6560 18
Controls and indicators a On/Off button g “DoubleShot” sensor buttons For switching coffee machine on and For making a particularly strong and off aromatic coffee by using twice as much ground coffee but the same b Display amount of water For showing information about the current action or status c Drink buttons For making drinks d Optical interface (for Miele Technical Service only) e sensor button – For making other drinks: ristretto, capuccino italiano, flat white, café au lait, hot milk and milk
Controls and indicators Drink button symbols Espresso Coffee Long coffee Capuccino Latte macchiato Espresso macchiato Tea water 20
Operation Sensor buttons To operate the coffee machine, tap the sensor buttons with your finger. An audible signal is generated each time a button is tapped. You can adjust the volume of the signal tones or switch the tones off (see “Settings – Volume”). Drinks menu When the following appears in the display, you are in the drinks menu: Select drink. Miele Select drink You will then be able to start an action or change settings in the menu.
Operation Symbols in the display The following symbols may also appear in the display in addition to the text: Symbol Explanation This symbol indicates the Settings menu and the Language menu option. This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information. This symbol appears if the system lock is activated. Operation is locked. The TeaTimer kitchen timer has been started (see “TeaTimer” in the “Tea” chapter).
Miele@home Your coffee machine is equipped with an integrated WiFi module. complete connection failures. Therefore, the availability of featured functions cannot be guaranteed. To use this feature, you will need: - a WiFi network - the Miele app - a Miele user account You can create a user account via the Miele app. The Miele app will guide you through the process of connecting your coffee machine to your home WiFi network.
Before first use Before using for the first time Turning on for the first time Remove any notices from the machine. Press the On/Off button if nothing is visible in the display. Selecting the display language Select the desired display language. You might also be asked for your location. Setting up the network (Miele@home) You can connect your coffee machine to your WiFi network. Remove the protective film from the drip tray cover and place it into the lower panel.
Before first use Setting the water hardness Your local water authority will be able to tell you the hardness of the water in your area. More information can be found under “Settings – Water hardness”. Enter your local water hardness (in °dH) and confirm with OK. Selecting the Performance Mode You can select the appropriate mode to suit your personal preferences (see “Settings – Performance Mode”). - Eco Mode: This is an energy-saving mode.
Filling the water tank Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day. Risk of damage due to incorrect operation. Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine. Carbonated water leaves too much limescale in the coffee machine. Only use cold, fresh tap water to fill the water container.
Filling the coffee bean container Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each cup. This requires the coffee bean container to be filled with coffee beans. Alternatively, you can make coffee drinks with ready ground coffee. Risk of damage to the grinder due to incorrect operation.
Switching on and off Switching the coffee machine on Switching the coffee machine off Tap the On/Off button . Tap the On/Off button . The coffee machine heats up and rinses the pipework. Hot water will run out of the main dispenser. If coffee has been dispensed, the coffee machine will rinse the pipework automatically before switching off. When Select drink appears on the display, you can make drinks.
Cup heating (depending on model: CM 6360, CM 6560) Pre-heating cups Cups should always be pre-heated to allow the flavor of the coffee to develop and its temperature to be retained. You can pre-heat cups or glasses on the cup heater on the top of the coffee machine. If cup heating is activated, the cup heating surface will be heated continually until the coffee machine is switched off.
Adjusting the coffee dispensers to the cup height You can adjust the main dispenser to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. Pull the main dispenser down until it is at the same level as the rim of the cup. Alternatively, push the main dispenser up until there is enough room to fit a larger cup or mug underneath.
Preparing beverages Danger of burning and scalding at the dispensers. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. Making coffee with and without milk The following drinks can be made: - Ristretto is a concentrated, stronger espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water.
Preparing beverages Milk preparation Milk or milk alternatives (e.g., soy milk) containing added sugar can clog up the milk pipe and the rest of the milk pipework. Residues from unsuitable liquids can interfere with milk preparation. The milk used must not contain any additives. Only use pasteurized cow's milk. separately or inserted into the milk flask lid (depending on the model). The connecting piece is easy to push out from the inside of the milk flask lid.
Preparing beverages First attach the connecting piece to the long stainless steel tube. Make sure that the slanted end of the stainless steel tube is pointing downward. Attach the rinse valve to the connecting piece. a Connecting piece b Lid c Seal d Stainless steel tube Open the milk carton and dip the milk siphon into the milk. Place the milk carton to the right next to the coffee machine. Connect the milk pipework to the aperture in the main dispenser.
Preparing beverages Select a drink: tap the sensor button for the drink you want. Or select a drink from the Additional | Additional drinks menu (sensor button ). Dispensing will start. Canceling a drink Tap the lit orange symbol on the control panel again. Place the milk flask to the right next to the coffee machine. Attach the milk pipework rinse valve to the milk flask lid. Connect the milk flask to the coffee machine by attaching the milk pipework to the aperture in the main dispenser.
Preparing beverages Making 2 portions ( sensor button) Select Additional | Additional drinks | Coffee Pot and confirm with OK. You can dispense 2 portions of a drink into 1 large cup or into 2 cups at the same time. Select the number of cups you want (3 to 8). Each portion of coffee will be ground, brewed, and dispensed individually. You can follow the process on the display. Canceling a drink Tap the sensor button. Place a cup under each of the main coffee dispenser spouts.
Preparing beverages Making coffee drinks from ground coffee Close the coffee chute. To make drinks using ready ground coffee, add a portion of ground coffee to the ground coffee chute. This allows you to make a decaffeinated coffee even if the bean container is already filled with regular coffee beans, for example. The following will appear in the display: Only 1 portion of coffee or espresso can be made at a time when using ready ground coffee. Place a cup under the main dispenser.
Preparing beverages Tea The coffee machine is not intended for commercial or scientific purposes. Temperatures given are approximate and can vary depending on the ambient conditions. When making tea, you can select from the following options: - Japanese Tea is a high-quality green tea which boasts a fine, fresh, “green” taste. Dispensed temperature: approx. 140°F (60°C), brewing time: approx. 1.
Preparing beverages of water according to the type of tea and the size of the cup (see “Portion size”). Pour loose tea into a tea filter or similar or take a tea bag out of the packet. TeaTimer Place the tea filter or the tea bag in the tea cup. You can use the TeaTimer function to start a kitchen timer when making tea. There is a preset brewing time for the type of tea selected. You can adjust the preset brewing time (up to a maximum of 14:59 minutes). The changed brewing time is saved.
Preparing beverages After the brewing time has elapsed, an audible signal will sound and the symbol will flash. Remove the tea filter or tea bag when the desired brewing time has elapsed. Dispensing warm or hot water Danger of burning and scalding on the hot water dispenser. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components.
Expert Mode The Expert Mode function allows you to change the portion size while the drink is being made. The setting will not be saved and will only apply to the current drink. Switching Expert Mode on and off The drinks menu is displayed. Tap the sensor button. Select Settings | Expert Mode. Select the option you want. Confirm with OK. The setting is saved. Expert Mode: changing the portion size The drinks menu is displayed.
Grinder setting The grinder setting determines the contact time between the ground coffee and the water, known as the extraction time. When the ideal grinder setting is selected, the machine dispenses a perfect cup of coffee with a fine, hazelnut-brown crema. Adjusting the fineness of grind Open the appliance door. The grinder setting you select will be used for all coffee drinks. There are various ways to tell whether the coffee grinder is set correctly.
Parameters Displaying and changing parameters You can change the portion size for all drinks. In addition, you can set the amount of coffee, brew temperature, and prebrewing parameters for each coffee drink individually. Tap and select Parameters. Select a drink and confirm with OK. The parameters that can be changed for this drink are displayed. Once you have selected a drink, the current settings for the following appear: Amount of coffee, Brew temperature, and Pre-brewing.
Parameters Tip: For the drinks pictured on the control panel, you can change the portion size by pressing and holding the button down while the drink is being dispensed. To do this, keep the drinks button pressed until the machine starts dispensing. During dispensing, Save appears in the display. Amount of coffee The coffee machine can grind and brew 6-14 g of coffee beans per cup. The greater the amount, the stronger the coffee. The amount of coffee is too low if the espresso or coffee lacks body.
Profiles In addition to the Miele drinks menu (Miele profile), you can create individual profiles to cater for different tastes and preferences. Within the profile, you can adjust the portion sizes and parameters individually for all drinks. Tip: It is best to select short names. The profile is created. Making drinks stored in a profile Tap the sensor button and select Profiles. Confirm with OK. The name of the current profile is shown in the top left of the display. Select the profile you want.
Profiles - Manual: The selected profile will remain active until you select another one. - After each use: The machine will revert to the Miele profile whenever a drink is dispensed. - When turned on: The Miele profile will be displayed whenever the coffee machine is switched on, regardless of which profile was selected before the machine was last switched off. Select Change profile and confirm with OK. Select the option you want and confirm with OK.
MobileStart With MobileStart you can, for example, start making a drink via the Miele app. You will only be able to use MobileStart if Miele@home has been set up for your coffee machine. Danger of burning and scalding at the dispensers. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the main dispenser or touch hot components.
Settings Displaying and changing Settings Volume The drinks menu is displayed. You can set the volume of the audible signal and keypad tones (segment bar). Tap the sensor button. Display brightness Select Settings and tap OK. You can set the display brightness (segment bar). Select the menu option that you want to display or change. Confirm with OK. Change the setting as required and confirm with OK.
Settings Eco Mode Eco Mode is an energy-saving mode. The system does not heat up until someone starts making a drink. Barista Mode This Performance Mode has been optimized for unadulterated coffee enjoyment. Users can enjoy coffeebased drinks without any delay as the coffee machine remains heated to the brewing temperature. This mode consumes more energy than Eco Mode. Latte Mode This Performance Mode has been optimized for preparing milk.
Settings Water hardness °dH gpg Calcium content mg/l Ca 2+ Setting °dH or ppm (mg Ca 2+ Water hardness gpg /l) Calcium content mg/l Ca 2+ Setting or ppm (mg Ca 2+ /l) 1 1 7 1 30 31 214 30 2 2 14 2 31 32 221 31 3 3 21 3 32 33 229 32 4 4 29 4 33 34 236 33 5 5 36 5 34 35 243 34 6 6 43 6 35 36 250 35 7 7 50 7 36 37 257 36 8 8 57 8 37–45 38–47 258–321 37–45 9 9 64 9 46–60 48–62 322–429 46–60 10 10 71 10 61–70 63–73 430
Settings Miele@home Remote control The following points may appear under Miele@home: The remote-control option appears when the coffee machine is connected to a WiFi network. - Set up: This option only appears if the coffee machine has never been connected to a WiFi network or if the network configuration has been reset. - Deactivate*/Activate*: The settings for the WiFi network are retained, but the network is switched on or off. - Connection status*: Information about the WiFi connection is displayed.
Settings Running a RemoteUpdate Information about the content and scope of an update is provided in the Miele app. A message will appear in your coffee machine display if a software update is available. You can install the update immediately or postpone this until later. When the coffee machine is switched on again, you will be reminded about the update. Deactivate RemoteUpdate if you do not want to install the update. The update may take several minutes.
Cleaning and care Risk to health due to inadequate cleaning. Heat and moisture inside the coffee machine can cause coffee residues to become moldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Clean by hand or in dishwasher The brew unit is not dishwasher safe. Only clean the brew unit by hand with warm water. Do not use any cleaning agents. The following components must be cleaned by hand only: Risk of damage as a result of excessively high dishwasher temperatures. Components may be ruined (e.g., may become warped) if washed in a dishwasher at temperatures higher than 130°F (55°C).
Cleaning and care Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Drip tray and grounds container Clean the drip tray and grounds container every day to avoid unpleasant smells and mildew. The grounds container is located in the drip tray. Water from rinsing also collects in the grounds container. A prompt will appear in the coffee machine display when the drip tray and/ or the grounds container is full and needs to be emptied. Empty the drip tray and the grounds container.
Cleaning and care Cleaning the drip tray cover Remove the drip tray cover. The drip tray can be cleaned in the dishwasher, or by hand using warm water and liquid dish soap. Dry the drip tray cover. Take the lid off the water container and wash it by hand. The water container can be cleaned in the dishwasher, or by hand using warm water and liquid dish soap. Dry the water container after cleaning. Refit the drip tray cover.
Cleaning and care Removing and cleaning the water container filter Clean the water container filter once a month. The water container filter is located under the water container. Remove the water container. Unscrew the cap. Remove the seal and the filter. Rinse all parts carefully under running water. - Use the supplied cleaning brush for parts that are difficult to reach, e.g., in the dispensing unit.
Cleaning and care 2 Clean the surfaces of the main dispenser with a damp cloth. Pull off the upper silicone section with the aperture for the milk pipework . To effectively remove coffee deposits, clean the coffee pipework with the cleaning brush once a month. 4 The gray silicone section contains a black, cylindrical component . Pull out the black component. Remove the dispensing spouts . Clean all parts thoroughly.
Cleaning and care Reinstall the dispensing unit onto the main dispenser. Replace the stainless steel cover and connect the milk pipework if required. Push the cleaning brush a maximum of 1/2" (1 cm) into the steam jet. Clean the steam jet with the cleaning brush. Tip: The “seam” on the milk pipework and on the main dispenser makes it easier to assemble. Cleaning the steam jet Clean the steam jet once a month.
Cleaning and care Pull the silicone plug out of the rinse valve body. Rinse the silicone plug under running water before placing the component in the dishwasher. Clean also the hose connections in the rinse valve body. To do this, insert the cleaning brush into both openings and move the brush back and forth. Risk of damage to the silicone plug Be sure to remove the silicone plug before cleaning the rinse valve body with a cleaning brush or similar utensil.
Cleaning and care Tip: Alternatively, you can soak the individual components overnight in water and liquid dish soap. Rinse the components under running water afterwards. Reassemble the rinse valve. Cleaning the milk siphon Clean the milk siphon every day. Rinse the milk siphon under running water. Remove the connecting piece from the stainless steel tube. Clean the individual components in a dishwasher.
Cleaning and care Clean the bean container with a dry, soft cloth. The coffee bean container can now be refilled. If necessary, clean the ground coffee chute: Open the ground coffee chute and remove any ground coffee residue. Tap . Select Maintenance and confirm with OK. You can now select a maintenance program. Rinse appliance Tip: Use a vacuum cleaner to remove any coffee residues from the bean container and the ground coffee chute.
Cleaning and care Cleaning the milk pipework (maintenance program) The Clean milk pipework maintenance program lasts for approx. 15 minutes. You need 1 stick of cleaning agent for milk pipework for the maintenance program. Tap . Select Maintenance | Clean milk pipework. Pour the prepared cleaning solution into the water container. Replace the water container. Follow the additional instructions given in the display.
Cleaning and care Degreasing the brew unit and cleaning the interior Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. It is recommended to use Miele Cleaning Tablets to clean the brew unit. These have been specially developed for degreasing the brew unit in Miele Coffee Machines and prevent subsequent damage.
Cleaning and care Clean the brew unit by hand under warm running water without using cleaning agent or liquid dish soap. Dropping a cleaning tablet into the brew unit Insert the brew unit containing tablet Close the door. Clean any coffee remnants off the brew unit filter. Dry the funnel to prevent ground coffee from sticking to it the next time a coffee is made. Make sure to remove moist ground coffee remnants regularly to prevent bacteria from forming. Clean the interior of the coffee machine.
Cleaning and care The cleaning process is complete when the drinks menu appears. Descaling the appliance Risk of damage from splashes from the descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages immediately when descaling. Limescale builds up in the coffee machine through use. How often the machine needs to be descaled will depend on the water hardness level in your area. Limescale must be removed regularly.
Cleaning and care Follow the instructions in the display. If the operating temperature is too high for the descaling process, the coffee machine cools down. No separate message is shown on the display during the cooling phase. When Fill the water container with descaling agent and lukewarm water up to the appears in the display, proceed as follows. symbol and replace. Preparing the descaling solution For optimum descaling results, it is recommended to use the Miele Descaling Tablets.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Messages in the display Error messages must be confirmed with OK, otherwise the message may reappear in the display even though the problem has been remedied.
Frequently Asked Questions Problem Possible cause and solution F73 or The brew unit cannot be positioned correctly. Switch the coffee machine off with the On/ Off button . Unplug the coffee machine. Wait for two minutes before inserting the electrical plug back in the socket. Remove the brew unit and rinse under running water. Check the brew unit Push the coffee ejector of the brew unit into the correct position. Do not insert the brew unit.
Frequently Asked Questions Problem Too much ground coffee Possible cause and solution There is too much ground coffee in the ground coffee chute. The brew unit cannot compact ground coffee if more than 12 g (2 level spoonfuls) of ground coffee are added to the coffee chute. The ground coffee will be emptied into the grounds container and the fault message will appear in the display. Switch the coffee machine off with the On/Off button .
Frequently Asked Questions Unusual performance of the coffee system Problem Possible cause and solution The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough. Tap and hold the On/Off button for at least 3 seconds. The electrical plug is not properly plugged into the socket. Insert the electrical plug into the socket. The breaker has tripped because the coffee machine, voltage, or another appliance is defective.
Frequently Asked Questions Problem Possible cause and solution The water container is not in the correct position. appears in the Remove the water container and push it back in display even though the again. water container is full Remove and clean the water container filter (see and in the machine. “Cleaning and care – Removing and cleaning the water container filter”). Fill and replace the water container The water container was not correctly filled up and inserted during descaling.
Frequently Asked Questions Problem Possible cause and solution Neither milk nor milk froth comes out of the main dispenser. The milk pipework was connected incorrectly to the main dispenser. The seam on the milk pipework, main dispenser, and on the rinse valve makes it easier to assemble. Check whether the milk pipework is correctly connected to the main dispenser. The milk pipework is blocked. Clean the main dispenser and milk pipework carefully with the brush.
Frequently Asked Questions Problem Possible cause and solution The grounds container is overflowing even though the drip tray and grounds container have been emptied following each reminder. The drip tray has probably been removed without the grounds container being emptied. Removing the drip tray resets the internal counter for emptying the grounds container. Always empty the grounds container if you remove the drip tray.
Frequently Asked Questions Problem Possible cause and solution Coffee dispensing is repeatedly interrupted and the message Fill the bean container appears in the display. This is not a fault. The brew unit has not detected the ground coffee. Certain types of coffee produce a small amount of coffee when they are ground. Usually the grinder is set too fine and the amount is set to minimum. Confirm the message with OK.
Frequently Asked Questions Problem Possible cause and solution Coffee is not flowing out of the main dispenser. Or coffee is only being dispensed via one spout. The main dispenser has a blockage. Rinse the coffee pipework (see “Cleaning and care – Rinsing the appliance”). Is there still no coffee flowing out of the main dispenser or is it only dispensed via one side? Dismantle the main dispenser and clean all parts carefully. Use the supplied cleaning brush for parts that are difficult to reach.
Frequently Asked Questions Problem Possible cause and solution The milk sputters when it is dispensed. Hissing noises can be heard when milk is being heated up or frothed. Although the milk should be frothed, only hot milk comes out of the main dispenser. The milk pipework was not correctly inserted. Pay attention to the seam on the double hose when you connect the milk pipework into the main dispenser.
Frequently Asked Questions Problem Possible cause and solution Coffee grounds have settled on the lid of the drip tray and in the interior around the brew unit. This is not a fault. The movement of the brew unit during the brewing process can cause some ground coffee to fall around it. The type of beans used, the fineness of the ground coffee, and the amount of coffee ground also affect the amount. Important! Clean the interior of the coffee machine regularly to prevent bacteria, etc.
Frequently Asked Questions Unsatisfactory results Problem Possible cause and solution The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cup, e.g. using the cup heater (depending on model). The brewing temperature is set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit.
Frequently Asked Questions Problem Possible cause and solution The coffee flows too quickly into the cup. The grind level is too coarse. Set the grinder to a finer setting (see “Setting the coffee grinder”). The coffee is dispensed The brew unit is blocked. too slowly into the cup. Degrease the brew unit (see “Cleaning and care – Degreasing the brew unit and cleaning the interior”). The crema on the coffee or espresso is not as it should be. 80 The coffee beans are no longer fresh.
Transport If the coffee system will not be used for an extended period of time, e.g. vacation, or will be transported over a long distance, the appliance should be prepared as follows.
Service and warranty Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
Accessories These products and other useful accessories can be ordered via the Miele Webstore, from Miele Service or from your Miele dealer. Included accessories - Miele “Welcome Pack” Different cleaning products are supplied depending on model. - Cleaning brush for cleaning the milk pipework, for example. Optional accessories Miele also offers a range of optional accessories, as well as cleaning and conditioning products for your coffee system.
Saving energy The following tips can help you save energy and money as well as help the environment: - Operate the coffee machine in Eco Mode. - Switch the coffee machine off with the On/Off button when it is not in use. - Change the setting for the Turn off after timer to 20 minutes. Then the coffee machine will switch off 20 minutes after the last drink has been made or a sensor button has been tapped. - If you only want to pre-heat your cups occasionally, you can switch the cup heating surface off.
Electrical connection Before connecting the coffee machine, make sure that the connection data on the data plate (voltage and frequency) matches the electrical supply. This data must match to avoid the risk of damage to the coffee machine. If in any doubt, consult a qualified electrician. The coffee machine must not be used with energy saving plugs. These reduce the energy supply to the machine, which could generate excessive heat.
*INSTALLATION* Installation Danger of overheating due to insufficient ventilation. If the coffee machine is not sufficiently ventilated, the appliance can overheat. Please ensure that there is adequate ventilation around the coffee machine. Do not cover the coffee machine with dish towels, etc. while it is in use. If the coffee machine is installed behind a closed cabinet front, heat and moisture can build up behind the cabinet front when closed.
*INSTALLATION* Appliance dimensions 87
*INSTALLATION* Appliance dimensions 9 88 7/8 "
Technical data Electricity consumption in standby: < 0.1 W Electricity consumption in networked standby: < 0.5 W Pump pressure: max. 15 bar / 217 psi Through-flow heater: 1 stainless-steel thermo block Dimensions (W x H x D): 9 7/8" x 14 1/8" x 16 13/16" 251 x 359 x 427 mm Net weight: 21.8 lb (9.9 kg) Power supply cord length: 55 1/8" (140 cm) Water container capacity: 60.9 oz (1.8 l) Coffee bean container capacity: approx. 300 g Milk flask capacity: 16.9 oz (0.5 l) Drip tray capacity: 25.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 www.mieleusa.com Customer Support Phone: 888-99-MIELE (64353) info@mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
CM 6160, CM 6360, CM 6560 en-US M.-Nr.
