Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Operation
- Miele@home
- Before first use
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Drip tray and grounds container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the main dispenser
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Accessing the Maintenance menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance program)
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Transport
- Service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Preparing beverages
34
Connect the stainless steel tube to
the inside of the lid. Make sure that
the slanted end of the stainless steel
tube is pointing downward.
Fill the milk flask with milk up to a
maximum of 3/4" (2cm) below the
rim. Seal the milk flask with the lid.
Place the milk flask to the right next
to the coffee machine.
Attach the milk pipework rinse valve
to the milk flask lid.
Connect the milk flask to the coffee
machine by attaching the milk
pipework to the aperture in the main
dispenser.
If you have not made any milk drinks
for a while, rinse the milk pipework
thoroughly before making the first
drink.
Making a coffee drink
Place a cup under the main
dispenser.
Select a drink: tap the sensor button
for the drink you want. Or select a
drink from the Additional | Additional
drinks menu (sensor button).
Dispensing will start.
Canceling a drink
Tap the lit orange symbol on the
control panel again.
When preparing drinks with several
ingredients (e.g., latte macchiato) you
can cancel each of the individual
components prematurely.
TapOK when Stop appears on the
display.
DoubleShot
Select the DoubleShot function if
you would like a particularly strong and
aromatic coffee. In this case, more
coffee beans will be ground and brewed
halfway through brewing. The shorter
extraction time means that fewer
unwanted aromas and bitter
compounds will be released.