Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Operation
- Miele@home
- Before first use
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Drip tray and grounds container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the main dispenser
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Accessing the Maintenance menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance program)
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Transport
- Service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Cleaning and care
56
Cleaning the drip tray cover
Remove the drip tray cover.
The drip tray can be cleaned in the
dishwasher, or by hand using warm
water and liquid dish soap.
Dry the drip tray cover.
Refit the drip tray cover. Make sure
that the drip tray cover is correctly
installed (see illustration).
Water container
Clean the water container lid by
hand only using warm water and
liquid dish soap.
Clean the water container every day.
You can clean the water container in the
dishwasher once a week.
Press on the mark on the water
container lid.
Pull the water container up by its lid
to remove it.
Take the lid off the water container
and wash it by hand.
The water container can be cleaned
in the dishwasher, or by hand using
warm water and liquid dish soap. Dry
the water container after cleaning.
Carefully clean the surface the water
container sits on, particularly the
slots.
Install the lid back on the water
container.
Make sure that the valve, the
underside of the water container, and
the surface the water container sits on
are clean. Otherwise, the water
container will not sit correctly.