Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Operation
- Miele@home
- Before first use
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Drip tray and grounds container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the main dispenser
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Accessing the Maintenance menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance program)
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Transport
- Service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Frequently Asked Questions
78
Problem Possible cause and solution
Coffee grounds have
settled on the lid of the
drip tray and in the inte-
rior around the brew
unit.
This is not a fault.
The movement of the brew unit during the brewing
process can cause some ground coffee to fall
around it. The type of beans used, the fineness of
the ground coffee, and the amount of coffee ground
also affect the amount. Important! Clean the interior
of the coffee machine regularly to prevent bacteria,
etc.
Check whether the amount of coffee is set too high.
The display lights up
but the coffee machine
does not heat up and no
drinks are made.
The coffee machine
cannot be turned off.
The Demo mode for demonstrating the coffee
machine in stores and showrooms has been
activated.
Deactivate Demo mode.