User Manual
Table Of Contents
- Titelseite
- Inhalt
- Inhalt
- Sicherheitshinweise und Warnungen
- Gerätebeschreibung
- Ihr Beitrag zum Umweltschutz
- Anmerkung zu den Europäischen Verordnungen (EU) Nr. 665/2013 und (EU) Nr. 666/2013
- Abbildungsverweise
- Vor dem Gebrauch
- Saugschlauch anschließen
- Saugschlauch abnehmen
- Saugschlauch und Handgriff zusammenstecken
- Handgriff und Saugrohr zusammenstecken
- Teleskoprohr einstellen
- Teleskoprohr und umschaltbare Bodendüse zusammenstecken
- Umschaltbare Bodendüse einstellen
- Verwendung der Ritzendüse SRD
- Batterien in LED-Handgriff einlegen
- Aktivierung der Abluftfilter-Wechselanzeige timestrip am Abluftfilter
- Funktion der Abluftfilter-Wechselanzeige timestrip
- Verwendung des mitgelieferten Zubehörs
- Gebrauch
- Abstellen, Transportieren und Aufbewahren
- Wartung
- Wo bekomme ich Staubbeutel und Filter?
- Welche Staubbeutel und Filter sind richtig?
- Wann tausche ich den Staubbeutel aus?
- Zur Prüfung
- Funktion der Staubbeutel-Wechselanzeige
- Wie tausche ich den Staubbeutel aus?
- Wann tausche ich den Motorschutzfilter aus?
- Wie tausche ich den Motorschutzfilter aus?
- Wann tausche ich den Abluftfilter aus?
- Wie tausche ich den Abluftfilter AirClean aus?
- Wie tausche ich die Abluftfilter , und aus?
- Abluftfilter umrüsten
- Beim Umrüsten beachten
- Serviceanzeige mit Resettaste
- Wann tausche ich die Batterie am Funkhandgriff aus?
- Wie tausche ich die Batterie am Funkhandgriff aus?
- Wann tausche ich die Batterien am LED-Handgriff aus?
- Wie tausche ich die Batterien am LED-Handgriff aus?
- Wann tausche ich die Fadenheber aus?
- Wie tausche ich die Fadenheber aus?
- Laufrolle der Bodendüse reinigen
- Pflege
- Was tun, wenn ...
- Technische Daten
- Konformitätserklärung
- Kundendienst
- Nachkaufbares Zubehör
- Bodendüsen/-bürsten
- Bodendüse AllergoTeQ (SBDH 285-3)
- Turbobürste TurboTeQ (STB 305-3)
- Bodenbürste Hardfloor Twister mit Drehgelenk (SBB 300-3)
- Bodenbürste Parquet Twister mit Drehgelenk (SBB 300-3)
- Bodenbürste Parquet Twister XL mit Drehgelenk (SBB 400-3)
- Sonstiges Zubehör
- Zubehörkoffer MicroSet (SMC 20)
- Handturbobürste Turbo XS (STB 20) / Handturbobürste Turbo Mini (STB 101)
- Universalbürste (SUB 20)
- Lamellen-/Heizkörperbürste (SHB 30)
- Matratzendüse (SMD 10)
- Fugendüse, 300 mm (SFD 10)
- Fugendüse, 560 mm (SFD 20)
- Polsterdüse, 190 mm (SPD 10)
- Flexible Schlauchverlängerung (SFS 10)
- Comfort-Handgriff mit Beleuchtung (SGC 20)
- Filter
- Abluftfilter AirClean Plus 50 (SF-AP 50)
- Abluftfilter Active AirClean 50 (SF-AA 50)
- Abluftfilter HEPA AirClean 50 (SF-HA 50)
- Filtergitter
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Caring for the environment
- Notes on Delegated Regulation (EU) No. 665/2013 and 666/2013
- Illustrations
- Preparing for use
- Attach the suction hose
- To detach the suction hose
- Connect the suction hose to the handle
- Connect the handle to the suction tube
- Adjusting the telescopic suction tube
- Connect the telescopic tube to the floorhead
- To adjust the floorhead
- Using the SRD hard floorbrush
- Inserting batteries into the LED handle
- Activating the exhaust filter TimeStrip change indicator on the exhaust filter
- How the exhaust filter timestrip works
- Using the accessories supplied
- Use
- Setting down, transportation and storage
- Maintenance
- Purchasing new dustbags and filters
- Ordering the correct dustbags and filters
- When to change the dustbag
- To check the dustbag change indicator
- How the dustbag change indicator works
- How to replace the dustbag
- When to change the motor protection filter
- How to change the dust compartment filter
- When to replace the exhaust filter
- How to replace the AirClean filter
- Replacing the , and exhaust filters
- Replacing one type of exhaust filter with another
- When changing the filter, please note
- Maintenance indicator with reset button
- When to change the battery in the radio-control handle
- How to change the battery in the radio-control handle
- When to replace the batteries in the LED handle
- How to replace the batteries in the LED handle
- When to change the thread lifters
- How to replace the thread lifters
- Cleaning the roller on the floorhead
- Cleaning and care
- Problem solving guide
- Technical data
- Conformity declaration
- After sales service
- Optional accessories
- Floorheads / brushes
- AllergoTeQ floorhead (SBDH 285-3)
- TurboTeQ Turbobrush (STB 305-3)
- Hard floor Twister floorbrush with swivel action (SBB 300-3)
- Parquet Twister floorbrush with swivel action (SBB 300-3)
- Parquet Twister XL floorbrush with swivel action (SBB 400-3)
- Other accessories
- MicroSet (SMC 20)
- Flexible Mini Turbobrush XS (STB 20) / Turbo Mini (STB 101)
- Universal brush (SUB 20)
- Radiator brush (SHB 30)
- Mattress nozzle (SMD 10)
- Crevice nozzle, 300 mm (SFD 10)
- Crevice nozzle, 560 mm (SFD 20)
- Upholstery nozzle, 190 mm (SPD 10)
- Flexible hose extension (SFS 10)
- Comfort handle with lighting (SGC 20)
- Filters
- AirClean Plus 50 exhaust filter (SF-AP 50)
- Active AirClean 50 exhaust filter (SF-AA 50)
- HEPA AirClean 50 exhaust filter (SF-HA 50)
- Filter grille
- Electrical connection for the UK
- Electrical connection AU, NZ
- Table des matières
- Consignes de sécurité et mises en garde
- Description de l'appareil
- Votre contribution à la protection de l'environnement
- Notes sur les directives européennes 665/2013 (UE) et 666/2013 (UE)
- Références des croquis
- Avant utilisation
- Raccordement du flexible d'aspiration
- Retrait du flexible d'aspiration
- Assemblage du flexible et de la poignée
- Raccordement du flexible et du tube d'aspiration
- Réglage du tube télescopique
- Assemblage du tube télescopique et de la brosse double position
- Réglage de la brosse double position
- Utilisation de la brosse pour fentes et joints SRD
- Insérer les piles dans la poignée à LED
- Activation de l'indicateur de saturation du filtre timestrip sur le filtre d'évacuation
- Fonction de l'indicateur de saturation du filtre timestrip
- Utilisation des accessoires fournis
- Utilisation
- Sortir le câble d'alimentation
- Enroulement du câble d'alimentation
- Mise en marche et arrêt
- Sélection de la puissance d’aspiration
- Pédales
- Pédales avec fonction Boost
- _
- Poignée avec commande à distance
- Poignée avec fonction Boost
- _
- Ouvrir le curseur d'air additionnel
- Pendant l'aspiration
- Interrompre le fonctionnement de l'aspirateur
- Eclairer la zone de travail
- Transport et rangement
- Maintenance
- Où se procurer les sacs et les filtres ?
- Quels sacs à poussière et quels filtres choisir ?
- Quand remplacer le sac à poussière ?
- Vérification
- Fonctionnement de la jauge de remplacement du sac à poussière
- Comment remplacer le sac à poussière ?
- Quand remplacer le filtre moteur ?
- Comment remplacer le filtre moteur ?
- Quand remplacer le filtre d'évacuation ?
- Comment remplacer le filtre d'évacuation AirClean ?
- Comment remplacer les filtres d'évacuation , et ?
- Changer le type de filtre d'évacuation
- Conseils en cas de changement du type de filtre
- Témoin de saturation des filtres avec touche Reset
- Quand faut-il remplacer la pile sur la poignée avec commande à distance ?
- Comment remplacer la pile de la commande à distance ?
- Quand remplacer les piles sur la poignée à LED ?
- Comment remplacer les piles sur la poignée à LED ?
- Quand remplacer les ramasse-fils ?
- Comment remplacer les ramasse-fils ?
- Nettoyage des roulettes de la brosse
- Entretien
- En cas d'anomalie
- Caractéristiques techniques
- Déclaration de conformité
- Service après-vente
- Accessoires en option
- Brosses / Suceurs
- Brosse AllergoTeQ (SBDH 285-3)
- Turbobrosse TurboTeQ (STB 305-3)
- Brosse Parquet Twister (SBB 300-3) pour sols durs
- Brosse Parquet Twister multidirectionnelle (SBB 300-3)
- Brosse Parquet Twister XL (SBB 400-3)
- Autres accessoires
- Mallette d'accessoires (SMC 20)
- Mini turbobrosse XS (STB 20)/ Mini turbobrosse (STB 101)
- Brosse universelle (SUB 20)
- Brosse pour radiateurs et interstices (SHB 30)
- Suceur plat pour matelas (SMD 10)
- Suceur plat extra long 300 mm (SFD 10)
- Suceur plat extra long 560 mm (SFD 20)
- Suceur à coussins 190 mm (SPD 10)
- Rallonge de flexible (SFS 10)
- Poignée Confort avec fonction Spotlight (SGC 20)
- Filtres
- Filtre d'évacuation AirClean Plus 50 (SF-AP 50)
- Filtre à évacuation Active AirClean 50 (SF-AA 50)
- Filtre d'évacuation HEPA AirClean 50 (SF-HA 50)
- Grille de filtre
- Inhoud
- Veiligheidsinstructies en waarschuwingen
- Beschrijving van het apparaat
- Een bijdrage aan de bescherming van het milieu
- Informatie met betrekking tot de Europese verordeningen (EU) nr. 665/2013 en (EU) nr. 666/2013
- Verwijzing naar afbeeldingen
- Vóór gebruik
- Zuigslang aansluiten
- Zuigslang loshalen
- Zuigslang en greep in elkaar schuiven
- Greep en zuigbuis in elkaar schuiven
- Telescopische zuigbuis instellen
- Telescopische zuigbuis en omschakelbare zuigmond in elkaar steken
- Omschakelbare zuigmond instellen
- Gebruik van de kierenzuigmond SRD
- Batterijen in de greep plaatsen
- Activering indicator uitblaasfilter (timestrip)
- Functie indicator uitblaasfilter (timestrip)
- Gebruik van de accessoires
- Gebruik
- Transporteren en opbergen
- Onderhoud
- Waar kunt u nieuwe stofcassettes en filters krijgen?
- Welke stofcassettes en filters zijn de juiste?
- Wanneer moet u de stofcassette vervangen?
- Controle of de stofcassette vol is
- Wat u moet weten over de stofstandindicator
- Zo vervangt u stofcassettes
- Wanneer moet u het motorfilter vervangen?
- Het vervangen van het motorfilter
- Wanneer moet u het uitblaasfilter vervangen?
- Het vervangen van het AirClean-filter
- Het vervangen van het uitblaasfilter , en
- Een ander uitblaasfilter plaatsen
- Belangrijk!
- Controlelampje met reset-toets
- Wanneer moet de batterij in de handgreep worden vervangen?
- Het vervangen van de batterij in de handgreep
- Wanneer moet u de batterijen in de LED-handgreep vervangen?
- Het vervangen van de batterijen in de LED-handgreep
- Wanneer moet u de korte draadopnemers vervangen?
- Het vervangen van de korte draadopnemers
- Loopwieltje van de zuigmond reinigen
- Onderhoud
- Nuttige tips
- Technische gegevens
- Conformiteitsverklaring
- Afdeling Klantcontacten
- Bij te bestellen accessoires
- Zuigmonden / borstels
- Zuigmond AllergoTeQ (SBDH 285-3)
- Turboborstel TurboTeQ (STB 305-3)
- Borstel Hardfloor Twister met draaigewricht (SBB 300-3)
- Borstel Parquet Twister met draaigewricht (SBB 300-3)
- Borstel Parquet Twister XL met draaigewricht (SBB 400-3)
- Overige accessoires
- Accessoirekoffer MicroSet (SMC 20)
- Handturboborstel Turbo XS (STB 20) / Handturboborstel Turbo Mini (STB 101)
- Universele borstel (SUB 20)
- Lamellen-/radiatorborstel (SHB 30)
- Matraszuigmond (SMD 10)
- Kierenzuiger, 300 mm (SFD 10)
- Kierenzuiger, 560 mm (SFD 20)
- Meubelzuigmond, 190 mm (SPD 10)
- Flexibel verlengstuk voor de slang (SFS 10)
- Comfort-greep met verlichting (SGC 20)
- Filters
- Uitblaasfilter AirClean Plus 50 (SF-AP 50)
- Uitblaasfilter Active AirClean 50 (SF-AA 50)
- Uitblaasfilter HEPA AirClean 50 (SF-HA 50)
- Filterrooster
- Indice
- Istruzioni di sicurezza e avvertenze
- Descrizione apparecchio
- Il Vostro contributo alla tutela dell'ambiente
- Indicazioni sui regolamenti europei (UE) nr. 665/2013 e 666/2013
- Nota relativa alle immagini
- Prima dell'uso
- Allacciare il tubo flessibile
- Rimuovere il tubo flessibile
- Collegare impugnatura e tubo flessibile
- Collegare impugnatura e tubo aspirante
- Regolare la lunghezza del tubo telescopico
- Collegare il tubo telescopico e la bocchetta a pavimento commutabile
- Impostare la bocchetta commutabile
- Uso della bocchetta speciale per fughe SRD
- Inserire le batterie nell'impugnatura a LED
- Attivare l'indicatore saturazione filtro aria in uscita timestrip sul filtro aria in uscita
- Funzione dell'indicatore saturazione filtro aria in uscita timestrip
- Uso degli accessori in dotazione
- Uso
- Estrarre il cavo di alimentazione
- Avvolgere il cavo
- Accensione e spegnimento
- Impostare la potenza aspirante
- Tasti a pedale
- Tasti a pedale con funzione Boost
- _
- Radiocomando
- Impugnatura con radiocomando e funzione Boost
- _
- Aprire l'aria secondaria
- Durante l'aspirazione
- Interrompere il procedimento
- Illuminare la superficie da aspirare
- Sospendere il lavoro, trasportare l'aspirapolvere e riporlo
- Manutenzione
- Dove acquistare sacchetti e filtri originali
- Quali sono i sacchetti e i filtri adatti
- Quando sostituire il sacchetto polvere
- Verificare il grado di saturazione del sacchetto
- Funzionamento dell'indicatore sostituzione sacchetto
- Come sostituire il sacchetto polvere
- Quando sostituire il filtro motore
- Come sostituire il filtro motore
- Quando sostituire il filtro aria in uscita
- Come sostituire il filtro aria in uscita AirClean
- Come sostituire il filtro aria in uscita , e
- Cambiare filtro aria in uscita
- Da tenere presente quando si cambia tipo di filtro
- Spia di servizio con tasto reset
- Quando sostituire la batteria del radiocomando
- Come sostituire la batteria del radiocomando
- Quando sostituire le batterie dell'impugnatura LED
- Come sostituire le batterie dell'impugnatura LED
- Quando sostituire gli alzafili
- Come sostituire gli alzafili
- Pulire le rotelle della bocchetta
- Pulizia / Manutenzione
- Guasti, cosa fare.
- Dati tecnici
- Dichiarazione di conformità
- Assistenza tecnica
- Accessori su richiesta
- Bocchette / Spazzole
- Bocchetta a pavimento AllergoTeQ (SBDH 285-3)
- Turbospazzola TurboTeQ (STB 305-3)
- Spazzola pavimenti Hardfloor Twister con snodo (SBB 300-3)
- Spazzola pavimenti Parquet Twister con snodo (SBB 300-3)
- Spazzola pavimenti Parquet Twister XL con snodo (SBB 400-3)
- Altri accessori
- Valigetta accessori MicroSet (SMC 20)
- Turbospazzola a mano Turbo XS (STB 20) / Turbospazzola Turbo Mini (STB 101)
- Spazzola universale (SUB 20)
- Spazzola a lamelle / spazzola per termosifoni (SHB 30)
- Bocchetta per materassi (SMD 10)
- Bocchetta a lancia, 300 mm (SFD 10)
- Bocchetta a lancia, 560 mm (SFD 20)
- Bocchetta per poltrone, 190 mm (SPD 10)
- Prolunga tubo flessibile (SFS 10)
- Impugnatura Comfort con illuminazione (SGC 20)
- Filtri
- Filtro aria in uscita AirClean Plus 50 (SF-AP 50)
- Filtro aria in uscita Active AirClean 50 (SF-AA 50)
- Filtro aria in uscita HEPA AirClean 50 (SF-HA 50)
- Griglia filtro
- Inhalt
- Leere Seite
- Leere Seite
- Leere Seite
- Leere Seite
en
54
Purchasing new dustbags and filters
Original Miele dustbags and filters are
available from the Miele webshop, the
Miele Spare Parts Department and your
Miele dealer.
Ordering the correct dustbags and
filters
Only use original Miele GN dustbags
with a blue collar and original Miele fil-
ters. These are identified by the "ORI-
GINAL Miele" logo on the packaging.
Every packet of original Miele dustbags
contains four dustbags, one AirClean
exhaust filter and one motor protection
filter. Original Miele multipacks contain
16 dustbags, four AirClean exhaust fil-
ters and four motor protection filters.
Original Miele exhaust filters can also
be purchased separately from the Miele
Spare Parts Dept. or your Miele dealer.
Please quote the model number of your
vacuum cleaner when ordering to make
sure you get the correct filter. You can
also order all accessories via the Miele
webshop.
When to change the dustbag (dia. 37)
Change the dustbag when the colour
marker in the dustbag change indicator
turns red, or sooner if it is no longer ef-
fective (see possible reasons for this
below).
Miele dustbags are disposable and
designed for single use only. Dispose
of the dustbag when full. Do not at-
tempt to reuse. Blocked pores in
used dustbags will reduce the suc-
tion power of the vacuum cleaner.
To check the dustbag change indic-
ator
Attach the standard adjustable floor-
head to the vacuum cleaner.
Switch the vacuum cleaner on and
select the highest power setting.
Lift the floorhead off the floor a little.
How the dustbag change indicator
works
The dustbag change indicator is set for
normal household dust. This generally
contains a mixture of dust, hair,
threads, carpet fluff, grit etc.
However, if the cleaner has been used
to vacuum up fine dust, such as plaster,
brick dust, cement or flour, the pores of
the dustbag will become blocked very
quickly.
This affects the air permeability of the
bag, and the marker will indicate that
the bag is "full" even when it is not. If
this happens you must still change the
dustbag because suction power will be
greatly reduced by blocked pores in the
dustbag.
If, on the other hand, a large amount of
hair and carpet fluff which typically con-
tains a lot of air is vacuumed up, the in-
dicator may fail to react even though
the bag is full. For this reason, you