User manual

en
58
ever, the suction power will be reduced
as will the effectiveness of the filter if it
is not replaced in good time.
How to replace the AirClean filter
(dia. 35 + 36)
Do not use more than one exhaust fil-
ter at a time.
 Open the dust compartment lid.
 Press the release catch on the filter
grille and open the grille as far as it
will go.
 Grasp the used AirClean filter by one
of the clean, unsoiled sections and
take it out.
 Replace it with a new AirClean ex-
haust filter.
If you wish to fit an AirClean Plus50,
Silence AirClean50, Active AirClean
50 or HEPA AirClean 50, see “Main-
tenance - Replacing one type of ex-
haust filter with another”.
 Close the filter grille.
 Close the dust compartment lid.
How to replace an AirClean Plus 50,
Silence AirClean 50, Active AirClean
50 and HEPA AirClean 50 filter?
(dia. 37 + 38)
Do not use more than one exhaust fil-
ter at a time.
 Open the dust compartment lid.
 Lift the exhaust filter and remove it.
 Insert a new exhaust filter, making it
sure it goes in properly, then push it
down into position.
 If you are using exhaust filter c, d or
e, press the exhaust filter TimeStrip®
change indicator (dia. 12).
After approx. 10 - 15 seconds, a thin
red line will appear in the left hand side
of the display for these three exhaust fil-
ters (dia. 13).
If you wish to fit an AirClean filter,
see “Replacing one type of exhaust
filter with another”.
 Close the dust compartment lid.
Replacing one type of exhaust filter
with another (dia. 09)
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a AirClean
b AirClean Plus 50 (light blue)
c Silence AirClean 50 (grey)
d Active AirClean 50 (black)
e HEPA AirClean 50 (white)
Do not use more than one exhaust fil-
ter at a time.
When changing the filter, please note
1. If you wish to replace exhaust filter a
with filter b, c, d or e it is essential
that you remove the filter grille before
you fit the new exhaust filter.
If you are using exhaust filter c, d or
e, you must also activate the exhaust
filter TimeStrip® change indicator
(dia. 12).