Operating and Installation Instructions Built-in Coffee System To prevent accidents and machine damage, you absolutely must read these instructions before installation or use. en – US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 5 Preparing your appliance for an extended vacation.............................................. 14 Guide to the appliance ....................................................................................... 15 Controls and display ........................................................................................... 17 Accessories .................................................................
Contents Profiles.................................................................................................................. Accessing a profile ................................................................................................ Creating a user profile ...................................................................................... Selecting a user profile..................................................................................... Changing the name ........................
Contents Rinsing the coffee system ..................................................................................... Rinsing the milk pipework ..................................................................................... Cleaning the milk pipework ................................................................................... Degreasing the brew unit ...................................................................................... 63 63 64 66 Descaling the appliance ..................
IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully to prevent accidents and machine damage. This appliance complies with current safety requirements. Improper use of the appliance can cause personal injury and material damage. Read this safety information carefully before operating the appliance. They contain important information on the safe installation, operation, and care of your coffee system.
IMPORTANT SAFETY INSTRUCTIONS Intended use Use this coffee system only in standard household environments for making coffee beverages such as espresso, cappuccino, latte macchiato, etc. Any other type of use is not permitted. The coffee system is not suitable for outdoor use. This coffee machine must not be used at altitudes above 6560 ft (2000 m). The machine is intended only for the preparation of coffee-based drinks such as espresso, cappuccino, latte macchiato etc.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Danger of burning and scalding at the dispensers. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensers. Keep the coffee system out of reach of children. Children must be kept away from the machine unless they are constantly supervised. Children should be supervised when they are near the coffee system.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation and repairs may only be carried out by a Miele-authorized service technician. Installation, repairs and other work by unqualified persons can cause considerable danger to users. A damaged coffee system could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine.
IMPORTANT SAFETY INSTRUCTIONS Only use the coffee system in rooms where the ambient temperature is between +50°F (10°C) and +100°F (38°C). Do not cover or block the aeration and ventilation cross-sections. Condensation water can damage the coffee system or surrounding cabinets. Ensure that there is sufficient ventilation around the coffee system. The ventilation gaps in the housing unit and the gap between the top of the housing unit and the ceiling must be at least 78 3/4" (200 cm2).
IMPORTANT SAFETY INSTRUCTIONS Repairs must only be performed by a trained technician in accordance with national and local safety regulations. Repairs and other work by unauthorized persons could be dangerous and may void the warranty. Defective components should be replaced by Miele original parts only. Only with original Miele parts can the manufacturer guarantee the safety of the appliance. Never open the outer casing of the machine.
IMPORTANT SAFETY INSTRUCTIONS Proper use Danger of burning and scalding at the dispensers. The liquids and steam dispensed are very hot. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the spouts. Ensure that the main dispenser is clean and installed correctly. Water in the drip tray can also be very hot. Take care when emptying it.
IMPORTANT SAFETY INSTRUCTIONS Do not use oily beans or beans that have been treated with caramel, sugar, or other substances. Sugar and oil will damage the coffee system. Do not use any flavored ground coffee. The sugar in the coffee will stick to and block the brew unit of the coffee system. The cleaning tablets for degreasing the brew unit will not remove this type of deposit. Only use plain milk. Most sugary additives can clog the milk lines and damage the machine.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and care The coffee system must be disconnected from the electrical supply before cleaning or maintenance. Clean the coffee machine and the milk flask daily, particularly before using it for the first time (see “Cleaning and care”). All parts of the milk system need to be cleaned thoroughly and regularly. Do not use a steam cleaner to clean this machine. Steam could reach electrical components and cause a short circuit.
IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on stainless steel surfaces. These damage the surface, causing it to lose its dirt repellent protective coating. The finish on stainless steel surfaces is susceptible to scratching. Even magnets can cause scratching.
Guide to the appliance Front view a On / Off button b Controls and display c Door handle d Hot water dispenser e Drip tray cover f Height-adjustable main dispenser with lighting g Milk flask with lid 15
Guide to the appliance Interior view h Ground coffee chute cover i Brew unit j Ground coffee chute k Grind control lever l Coffee bean container m Water tank n Drip tray with no-spill grid o Waste unit p Drip catcher q Main dispenser connector r Service cover 16
Controls and display a On / Off button Turning the machine On and Off b Drink buttons For making espresso , coffee , cappuccino , or latte macchiato c Additional programs Additional drinks such as lungo coffee, caffè latte, hot milk, milk froth, and hot water, menu Maintenance g OK button For confirming display messages and saving settings h Profile For saving and editing user profiles i Settings For altering settings, displaying information or checking which settings are currently active.
Accessories These products and other useful accessories can be ordered via the Miele Webstore, from Miele Service or from your Miele dealer. Included accessories – Measuring scoop For ground coffee – Milk flask with lid For storing milk and preparing drinks with milk – Cleaning agent for milk pipework For cleaning the milk system (starter set) Optional accessories Miele also offers a range of optional accessories, as well as cleaning and conditioning products for your coffee system.
Before using for the first time Before using the coffee system for the first time, please read these instructions and make yourself familiar with the appliance and its controls. Before using for the first time Install the coffee system and connect it to the electrical supply (see “Electrical connection” and “Installation”). Remove any protective coverings from the front of the machine. Clean the appliance thoroughly before filling it with water and coffee beans (see “Cleaning and care”).
Before using for the first time Water hardness Determining the water hardness The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the coffee system will need to be descaled. You can measure the water hardness yourself using the enclosed test strip. Alternatively, your local water authority will be able to tell you the hardness of water in your area.
Operation To operate the coffee machine, tap the sensor buttons with your finger. When the following appears in the display you are in the drinks menu: Miele Select drink To make a coffee drink, tap one of the drink buttons. You can find more drinks in the Additional programs menu. Selecting a menu and navigating within a menu To select a menu, tap the relevant button. You will then be able to start an action or change settings in the menu.
Filling the water tank Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day. Risk of damage due to incorrect operation. Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine. Carbonated water leaves too much limescale in the coffee machine. Only use cold, fresh tap water to fill the water container.
Filling the coffee bean container Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each portion. This requires the coffee bean container to be filled with coffee beans. Alternatively, you can make coffee or espresso with ground coffee (see “Making coffee drinks from ground coffee”). Warning! Risk of damage to the grinder. Only put roasted coffee beans in the bean container. Do not fill the bean container with ground coffee.
Switching on and off Turning on When the coffee system is switched on, it heats up and rinses the pipework. This not only cleans the pipework, but also warms it before coffee is prepared. If the coffee system still has an operating temperature higher than 140°F (60°C), rinsing will not take place. Tap the On / Off button . The appliance will begin rinsing after the heating-up phase. Hot water will come out of the main dispenser. Switching the coffee machine off Tap the On/Off button .
Adjusting the coffee dispensers to the cup height You can adjust the main dispenser to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. Pull the main dispenser down until it is at the same level as the rim of the cup. Alternatively, push the main dispenser up until there is enough room to fit a larger cup or mug underneath.
Preparing beverages Danger of burning and scalding Making a coffee drink at the dispensers. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. The following drinks without milk can be made: – Espresso is a strong aromatic coffee with a thick hazelnut brown colored froth on top – known as the crema.
Preparing beverages Place a cup under each of the nozzles of the main dispenser. Tap . The button lights up. Tap the sensor button for the desired drink. Two portions of the desired drink will be dispensed from the main dispenser. Tip: If, after a while, you have not tapped one of the drink buttons, the “Double portion” option will revert back to single portions. Canceling preparation Drink preparation can be canceled as long as Stop is visible in the display. Tap OK.
Preparing beverages Making coffee drinks from ground coffee Open the appliance door. To make espresso or coffee using ground coffee, add a portion of ground coffee to the ground coffee chute. This gives you the option of preparing a cup of decaffeinated coffee, for example, even though the coffee bean container is filled with roasted coffee beans. The coffee system will automatically recognize that ground coffee has been placed in the chute.
Preparing beverages If you do not tap a drink button within approx. 15 seconds, the ground coffee will also be directed into the waste unit. Drinks with milk Danger of burning and scalding from hot steam coming out of the main dispenser! The liquids and steam dispensed are very hot. Only use plain milk. Most sugary additives can clog the milk lines. and damage the machine. If using dairy milk make sure that it has been pasteurized.
Preparing beverages Notes on the milk flask Milk is not cooled in the milk flask. Therefore, place the milk flask in the refrigerator if you are not going to use milk for a while. Good milk froth can only be achieved when cold milk (below 50°F / 10°C) is used. Push the milk flask into the coffee system. Preparing drinks with milk Place a suitable container under the main dispenser. a Lid b Sensor rod c Milk intake tube d Glass container Fill the milk flask up to max.
Preparing beverages Hot water Danger of burning and scalding on the hot water spout! The water produced is very hot. Preparing user profile drinks If you have already created a user profile (see “User profiles”), you can select it before preparing a drink. Tap Profile. Please note that the water produced by the machine is not boiling and is therefore not suitable for making tea. Place a suitable container under the hot water spout. Tap . Tap Select profile.
Preparing beverages After a drink has been prepared appears in the display a few minutes after a drink with milk has been prepared. Start the rinse cycle Tap OK. The milk pipework will now be rinsed. Even if you do not confirm with OK, the milk pipework will automatically be rinsed after some time. Tip: Remove the milk flask, rinse the cover under running water, and close the milk flask using the compact cap. Cool the milk until the next time you use it.
Coffee the way you like it In order to customize the coffee system to the type of coffee being used, you can – Change the grinder setting – Change the amount of coffee – Set the brewing temperature – Pre-brew the coffee powder To avoid damaging the grinder, please note the following: Only adjust the grinder one setting at a time. Grind the coffee beans again if you want to adjust the grinder to the next setting. Open the appliance door.
Coffee the way you like it Amount of coffee, brew temperature and pre-brewing – espresso or coffee flows into the cup very slowly. You can adjust the amount of coffee, the brew temperature and pre-brewing individually for each coffee drink. To do this, first select the drink from the Parameters menu and then adjust the drink parameters. – the crema is dark brown. Tap . Select the drink you want and tap OK.
Coffee the way you like it Brewing temperature Pre-brewing ground coffee The ideal brewing temperature will depend on: When the pre-brewing function is turned on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavor of the coffee. – the type of coffee, – whether an espresso or a coffee is being prepared, and – the altitude of the region.
Portion size The flavor of the coffee produced depends not just on the type of coffee used, but also on the amount of water used. You can program the amount of water to suit the size of your cups and the type of coffee you are using. For coffee drinks that use milk you can also set the amount of milk or milk froth to be dispensed with these drinks. Additionally, you can set the portion sizes for hot milk and milk froth alone.
Portion size Changing the portion size in the Parameters menu You can adapt the portion sizes for lungo coffee, caffè latte, hot milk, and milk froth using using the “Parameters” menu. Place a suitable container under the main dispenser. Tap . Select the desired drink. Changing the portion size for different user profiles You can set the portion size for individual drinks for each user profile. Tap Profile. Select the user profile.
Profiles If the coffee system is used by several people with different coffee preferences, you can create individual user profiles in addition to the Miele profile. In each profile, you can make settings for individual drinks (portion size, amount of ground coffee, brewing temperature and pre-brewing). The name of the current user profile is shown at the top left of the display. Accessing a profile Tap Profile. You can now create a user profile.
Profiles Selecting a user profile This selection is only possible if a profile has been allocated in addition to the Miele standard user profile. Deleting a user profile This selection is only possible if a profile has been allocated in addition to the Miele standard user profile. Use the arrow keys to highlight Select profile. Then tap OK. Use the arrow keys to highlight Delete profile. Then tap OK. Use the arrow keys to select the desired user profile. Then tap OK.
Profiles Changing a user profile You can program the coffee system so that it changes back to the Miele standard profile automatically after each drink is dispensed, so that the Miele profile is always active when the machine is switched on or so that it retains the most recently selected profile. Select Change profile and tap OK. You now have the following options: – Manually: The selected user profile remains active until you select another user profile.
Settings Accessing the “Settings” menu Changing and saving settings Tap Settings. Tap Settings. Now you can check or change any settings. Select the setting you wish to change with the arrow keys and tap OK. The check next to the individual entry shows you which setting is currently active. Use the arrow keys to highlight the required option. Then tap OK. The setting is now saved. Tap Back if you want to access the previous menu. Tap Settings to return to Select drink.
Settings Setting options The factory default for each option is indicated by *.
Settings Menu item Available settings Info Number of drinks – / Espresso / Coffee / Coffee Americano / / Latte macchiato / Caffè latte / Milk froth / Hot Total no. of uses Cappuccino milk / Hot water No. of uses until appliance needs descaling: No.
Settings Language Clock Format You can select the language (and location variant of that language) for all display text. Available options are: Tip: If you select the wrong language by mistake, you can find the Language option again via the symbol. Time of day You can set the time display, the clock format and the time. Display (time of day) You can choose from the following options: – On: The time and date are always visible in the display when the appliance is turned off.
Settings Selecting a timer Available options are: – Timer 1: Turn on at, Turn off at, Turn off after – Timer 2: Turn on at, Turn off at Turn on at: Turn off after The Turn off after timer function is only available in Timer 1. If none of the keys have been pressed or no drink has been prepared, the coffee system will turn itself off after 30 minutes to save energy. Please note that the coffee system will not turn on at the time specified if you have activated the system lock.
Settings To activate and deactivate the timer Eco mode For the time display, you have selected On or Night dimming: If the timer for Turn on at has been activated, the symbol and the desired switch-on time appear in the display 23:59 hours ahead of time. Eco mode is an energy-saving mode. The steam system does not heat up until a coffee drink or steam for hot milk / milk froth is requested. When the system lock is activated, the Turn on at option for the timer cannot be selected.
Settings Lighting Info (displaying information) You have the following options: Under the Info menu option, you can choose to display the number of portions made for each type of drink. – You can set the brightness when the machine is switched on. – You can set the brightness when the machine is switched off. – You can specify when the lighting should switch off (Lighting: Turn off after).
Settings Water hardness Factory default setting See “Before using for the first time” for information about water hardness. You can reset the settings back to the ones which were set when the coffee system was delivered - the factory default settings. Display brightness Change the display brightness using the arrow keys . Volume The volume of the alarm and the sensor buttons can be set using the arrow buttons .
Settings Showroom program (Demo mode) Do not activate this setting for domestic use. The coffee system can be presented in Miele Showrooms of retail stores with the Showroom program function. The lighting will come on, but drinks cannot be dispensed and other actions cannot be carried out. If you activate the Demo mode, you cannot turn the appliance off with the On / Off button .
Cleaning and care Risk to health due to inadequate cleaning. Heat and moisture inside the coffee machine can cause coffee residues to become moldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Clean by hand or in dishwasher The following must be cleaned by hand only: – Main dispenser cover – Brew unit – Coffee bean container and the coffee bean container lid – Service cover The maximum temperature of the dishwashing program selected must not exceed 130°F (55°C). Contact with natural dyes, such as those found in carrots, tomatoes, and ketchup, may discolor the plastic parts in the dishwasher. This discoloration does not affect the stability of the parts.
Cleaning and care All external surfaces are susceptible to scratching. Scratches on glass surfaces could even cause a breakage. Contact with unsuitable cleaning agents can discolor the external surfaces. Wipe up any spillages or splashes of descaling agent immediately.
Cleaning and care Drip tray Burn hazard! If the rinsing process has just finished, wait a few minutes before removing the drip tray as the water used for rinsing will run out of the coffee dispensers. Clean the drip tray every day to prevent unpleasant odors and mildew. A prompt will appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty it at the latest when this prompt appears.
Cleaning and care Drip tray cover Water tank Remove the drip tray cover. Change the water every day to prevent a build-up of bacteria. The drip tray cover can be cleaned in the dishwasher or by hand using warm water and liquid dish soap. Dry the drip tray cover thoroughly. Make sure that the valve, the underside of the water tank and the surface the water tank sits on are clean. Otherwise the water tank will not sit correctly.
Cleaning and care Waste unit Main dispenser After a certain period of time a reminder to empty the waste unit will appear in the display. The waste unit must be cleaned when this message appears. However, it is better to clean the waste unit every day to prevent a build-up of bacteria.. There will probably also be water in the waste unit left over from the rinsing process. Clean the waste unit daily.
Cleaning and care Hold the dispenser at the sides and pull it forwards to release it. Tip: Place the dispenser upright in the top basket of the dishwasher. Lay the adapters and dispenser nozzles in the cutlery tray. Turn upper connecting piece and pull it upwards to remove it. Remove lower connecting piece in the same way. Pull off the dispenser nozzles . The Y-piece connector must not be removed. Clean all parts thoroughly. 56 Clean the surfaces of the main dispenser with a damp cloth.
Cleaning and care Maintenance of the milk valve The milk valve should be cleaned once a week to ensure good quality milk froth. Tap . With the arrow key , select Maintenance. Then tap OK. Select Condition milk valve and tap OK. Reassemble the dispensing unit in the reverse order. Make sure that upper adapter clicks into position. Press the dispenser nozzles firmly onto the dispensing unit. Replace the dispensing unit in the main dispenser.
Cleaning and care Milk flask with lid Soiling can lead to machine malfunctions. It is important to keep the neck and flange of the milk flask clean (while filling it and carrying it). Taking apart the milk flask lid and cleaning it with the cleaning brush Milk fat can deposit in the milk flask lid. When this happens, milk will spray when milk froth is made. Clean the milk flask holder on the coffee system with a damp cloth.
Cleaning and care Coffee bean container Remove the bean container from the appliance and lift the lid backwards and off. Clean the bean container and the lid by hand with warm water and a little liquid dish soap. Then dry them both. Push the lid back on and place the bean container back in the appliance. Also use the cleaning brush to clean the milk pipework in the lid from the top and bottom. To reassemble the lid: First insert the seal into the lid.
Cleaning and care Interior and machine front Main dispenser connector First take out all removable parts and then clean the interior and the machine front with a mild solution of hot water and liquid dish soap. The part which connects the brew unit and the main dispenser is located on the inside of the machine front. Tip: Use your vacuum cleaner to remove dry coffee grounds. A small drip catcher is located inside the front of the machine at the bottom.
Cleaning and care Brew unit Remove the brew unit and wash by hand Clean the brew unit by hand only under warm running water. Do not use dish soap or any other cleaning agent. The moving parts of the brew unit are greased. Cleaning agents would damage the brew unit. When the brew unit has been pulled out, do not alter the position of the brew unit handle. This would cause the brew unit to be out of alignment and it would not fit back into the coffee machine.
Cleaning and care Maintenance programs The coffee machine has the following maintenance programs: – Rinsing the appliance – Rinsing the milk pipe – Cleaning the milk pipe – Degreasing the brew unit – Descaling the appliance Press the button on the end of the handle of the brew unit and while doing so turn the handle clockwise . Close the appliance door. Carry out the relevant maintenance program when the prompt to do so appears in the display.
Cleaning and care Rinsing the coffee system Rinsing the milk pipework You can rinse the coffee system pipework manually. Milk residue can clog up the milk pipework. If you have made a drink with milk, the coffee system will rinse the milk pipework automatically after a few minutes. After a coffee has been dispensed, the machine is rinsed before it turns off. This removes any residual coffee grounds. Tap . Tap the arrow key repeatedly until Maintenance is highlighted. Then tap OK.
Cleaning and care Cleaning the milk pipework The milk pipework must be cleaned approximately once a week. The coffee machine will remind you to do this. Three days before the milk pipework must be cleaned, Days until "Clean milk pipework": appears in the display. The coffee machine shows the number of days remaining until the milk pipework must be cleaned. Confirm the message with OK. When the number of days remaining reaches 0, Clean milk pipework will appear in the display.
Cleaning and care Making a cleaning solution When the display prompts you to do so: We recommend using the Miele milk pipework cleaning agent for cleaning the milk pipework. This has been specially developed for use with Miele coffee machines and prevents subsequent damage. Remove the water container and rinse it carefully with clean water. Make sure that no cleaning agent is left in the water container. Fill the water container with fresh tap water and place it back in the machine.
Cleaning and care Degreasing the brew unit Tap OK. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. Follow the instructions in the display. When Place a cleaning tablet in the ground coffee chute and close appears in the display: For optimum cleaning we recommend Miele cleaning tablets.
Descaling the appliance Important! When descaling the appliance, cover delicate surfaces and natural flooring to prevent damage from splashes of descaling solution. Ensure that any splashes of descaling solution are wiped up immediately. Lime scale builds up in the coffee system through use. How often the appliance needs to be descaled will depend on the water hardness level in your area. It should be descaled regularly to ensure that it functions correctly.
Descaling the appliance You will need two descaling tablets. Performing a descale Replace the water tank in the coffee system and close the front. Follow the instructions given in the display. When Rinse the water container and fill with fresh tap water up to the descaling symbol appears in the display: Fill the water tank to the mark with lukewarm water. Carefully rinse the water tank with clean water. Ensure that no descaling solution residue remains in the water tank.
Descaling the appliance Descaling when not prompted by a message Tap . Select Maintenance and tap OK. Select Descale the appliance. The descaling process cannot be cancelled once you have tapped “OK.” The process has to be completed through to the end. Tap OK. The descaling process will begin.
Frequently Asked Questions Most problems that occur during daily use can be easily corrected. With the help of the following guide, you will be able to find the causes of problems and rectify them. However, please note: Important! Never open the casing of the appliance. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.
Frequently Asked Questions Problem Possible cause and solution F73 or The brew unit cannot be positioned correctly, or it is dirty and the coffee cannot be processed. Check whether you can remove the brew unit (see “Cleaning and care - Brew unit”). If you can remove the brew unit, clean it (see “Cleaning and care – Brew unit”). Check the brew unit Push the coffee ejector of the brew unit into the correct position (see image). Push the waste unit and the water tank back in the machine.
Frequently Asked Questions Problem Possible cause and solution Too much ground coffee There is too much ground coffee in the coffee chute. If more than one level scoop of ground coffee is added to the coffee chute, the brew unit cannot process the coffee. The ground coffee will be directed into the waste unit and the fault message will appear in the display. Turn the machine off with the On / Off button. Remove and clean the brew unit (see “Cleaning and care – Brew unit”).
Frequently Asked Questions Unusual performance of the coffee system Problem Possible cause and solution The display remains dark when the coffee system is turned on using the On / Off button. The On / Off button was not touched for long enough. Tap the On / Off button and keep it pressed for at least 3 seconds. The plug is not properly plugged into the electrical outlet. Insert the plug into the electrical outlet.
Frequently Asked Questions Problem Possible cause and solution The coffee system does The system lock feature has been activated. not switch itself on, al- You need to deactivate the system lock (see “Setthough the timer setting tings - System lock”). Turn on at has been actiA day of the week has not been selected. vated. Check the timer settings and change them if required (see “Settings - Timer”). The machine was not used after being switched on automatically three times in succession.
Frequently Asked Questions Problem Possible cause and solution The machine door will not close. The containers are not pushed all the way in. Check the containers. The door hinges are not correctly aligned. Adjust the door hinges (see “Installation - Adjusting the door hinges”). The door is difficult to open and close. The cap of the main dispenser connector is not sufficiently greased. The silicone cap gets jammed in the brew unit. Check the silicone cap for damage.
Frequently Asked Questions Problem Possible cause and solution During rinsing, no or considerably less rinsing water than usual comes out of the main dispenser. No or considerably less coffee than usual comes out of the main dispenser. The displays and preparation noises are unchanged. The waste unit contains considerably more “coffee water.” The main dispenser is not correctly mounted. Make sure the main dispenser has been assembled as described (see “Cleaning and care – Main dispenser”).
Frequently Asked Questions Unsatisfactory results Problem Possible cause and solution The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its walls, the more important it is to pre-heat it. Pre-heat the cup with hot water, for example. The brewing temperature is set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit.
Frequently Asked Questions Problem Possible cause and solution The coffee trickles too slowly into the cup. The grind level is too fine. Set the grinder to a coarser setting (see “Grinder setting”). The crema on the coffee or espresso is not as it should be. The grinder setting is not correct. Set the grinder to a finer or coarser setting. The brew temperature is too high for the type of coffee being used. Set a lower brewing temperature. The coffee beans are no longer fresh.
Frequently Asked Questions Problems when making drinks with milk Problem Possible cause and solution The milk sprays during dispensing and hissing noises can be heard. Even though milk froth should be prepared, only hot milk emerges from the main dispenser. The milk temperature is too high. Good milk froth can only be achieved when cold milk (below 50°F/10°C) is used. Check the temperature in the milk flask.
Frequently Asked Questions Exchanging the elbow connector If you can prepare only hot milk instead of milk froth, check the following first: – Is the milk in the milk flask cold (< 50°F / 10°C)? – Have the main dispenser and milk flask lid been cleaned carefully? – Is the main dispenser correctly mounted? If you still cannot prepare milk froth, follow the steps described to exchange the elbow connector. You need the elbow connector that was provided as a spare part. Do not use a needle or similar implement.
Frequently Asked Questions Push the tubes back into the elbow connector and replace this in the machine. Make sure that the land on the elbow connector is pointing downwards. Re-insert the air intake tube into the opening . Replace the service cap and close the door.
Technical Service After sales service Warranty In the event of a fault that you cannot correct yourself, please contact For more information, please refer to the included warranty. – Your Miele dealer MieleCare (USA only) or – Miele Technical Service The telephone number for Miele is listed at the back of these instructions. Customer service requires the model and serial number of your coffee machine.
Saving energy If the settings of the following functions are altered from the factory default, energy consumption will increase: – Eco mode – Lighting – Time display – Timer 83
Packaging material / Disposal of old machine Disposal of your old appliance Old electrical and electronic appliances often still contain valuable materials. However, they also contain harmful substances that were essential for the proper functioning and safe use of the equipment. Handling these materials improperly or disposing of them in your household waste can be harmful to your health and the environment. Therefore, please do not dispose of your old appliance with regular household waste.
Electrical connection Make sure that the power to the machine is OFF before installing or performing maintenance or repairs. All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous.
Installation Installation and combination options The appliance is designed to be built into a tall unit.
Installation It can also be combined with other Miele built-in appliances. If the coffee system is to be built in above another appliance, there must be a full-width, closed shelf between them.
Installation Ventilation Condensation water can damage the coffee system or surrounding cabinets. The specified ventilation cross-sections absolutely must be observed. Do not cover or block the ventilation cross-sections. Clean the ventilation cross-sections on a regular basis. Due to the heating of water, water steam can condense inside the coffee system and inside the door. – A ventilation gap of at least 1 5/8" (40 mm) depth must be provided behind the appliance for air to circulate.
Installation Installing the coffee machine Make sure that there is no power supply to the machine during installation. This also applies when uninstalling! The machine may only be operated when installed and in an ambient temperature range between +50°F (10°C) to +100°F (38°C). Tip: It is helpful to place the coffee machine somewhere at the same height as the built-in niche. This will make it easier to connect the machine to the electrical supply.
Installation Four M5 screws are supplied for aligning and securing the appliance in the built-in niche. Open the appliance door, and partially tighten the side socket screws. Align the appliance by carefully unscrewing the lower screws until the appliance sits centrally in the niche. Tighten the two upper screws by hand to secure the appliance to the cabinet.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
CVA 6401 en – US, CA M.-Nr.
