Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Accessing the “Settings” menu
- Changing and saving settings
- Setting options
- Language
- Time of day
- Date
- Timer
- Eco mode
- Lighting
- Info (displaying information)
- Locking the coffee machine (System lock )
- Water hardness
- Display brightness
- Volume
- Activating and deactivating water connection
- Factory default setting
- Showroom program (Demo mode)
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Coffee bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Maintenance programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the appliance
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Plumbing
- Electrical connection
- Installation
Frequently Asked Questions
73
Problem Possible cause and solution
F73 or
Check the brew unit
The brew unit cannot be positioned correctly, or it is
dirty and the coffee cannot be processed.
Check whether you can remove the brew unit (see
“Cleaning and care - Brew unit”).
If you can remove the brew unit, clean it (see
“Cleaning and care – Brew unit”).
Push the coffee ejector of the brew unit into the
correct position (see image).
Push the waste unit and the water tank back in the
machine. Do not insert the brew unit. Close the
door and switch the machine on with the On / Off
button.
This will initialize the brew unit motor and put in back
into the start position.
When Insert the brew unit appears in the display,
open the door and put all the parts back in the
machine. Then close the door.
If the brew unit cannot be removed:
Turn the machine off with the On / Off button.
Wait for 2 minutes before turning it back on again.