Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Accessing the “Settings” menu
- Changing and saving settings
- Setting options
- Language
- Time of day
- Date
- Timer
- Eco mode
- Lighting
- Info (displaying information)
- Locking the coffee machine (System lock )
- Water hardness
- Display brightness
- Volume
- Activating and deactivating water connection
- Factory default setting
- Showroom program (Demo mode)
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Coffee bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Maintenance programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the appliance
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Plumbing
- Electrical connection
- Installation
Installation
95
Installing the coffee machine
Make sure that there is no power
supply to the machine during instal-
lation. This also applies when unin-
stalling!
The machine may only be operated
when installed and in an ambient
temperature range between +50°F
(10°C) to +100°F (38°C).
For installation, you will require two
hex keys in sizes 3 and 5.
To ensure the appliance door is flush
with the cabinetry front, a seal around
the building-in niche is needed or a
sealing strip must be adhered to the
coffee system.
If there is not a seal at the front of the
building-in niche, adhere the Miele
sealing strips from the back (see pic-
ture) before installing the coffee sys-
tem.The sealing strips can be pur-
chased from Miele.
Sealing strips are available from your
Miele dealer or from Miele.
Tip: It is helpful to place the coffee ma-
chine somewhere at the same height as
the built-in niche. This will make it eas-
ier to connect the machine to the elec-
trical supply and water line.
Using the large hex key, unscrew all
four feet on the underside of the ap-
pliance by about 1
/16" (2 mm).
The feet can be unscrewed by up to
approx. 3/8
" (10 mm).
Connect the appliance to the water
intake hose (see “Water connection”).
Connect the appliance to the electri-
cal supply.
Ensure the electrical and water con-
nections do not get damaged when
pushing the appliance into the niche.
Push the coffee machine all the way
into the built-in niche.
Make sure the coffee machine is cen-
tered and straight in the built-in niche.
If this is not the case, align the ma-
chine using the four feet.
Four M5 screws are supplied for align-
ing and securing the appliance in the
built-in niche.