Operating and installation instructions Built-in coffee machine CVA 6431 (C) To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Caring for the environment Disposal of the packing material The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.
Contents Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Preparing the coffee machine for use . . . . .
Contents Changing the portion sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Changing the portion size while making a drink . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Setting the portion size from the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Changing portion sizes for different profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Setting up profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Rinsing the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Waste container . . . . . .
Guide to the machine Exterior view a Controls and display b Handle c Plastic grille d Metal drip tray cover e Central spout f Inset for Cappuccinatore g Steam valve 6
Guide to the machine Interior view a Capsule plate (replace with the red descaling funnel when descaling is carried out) b Brew unit c Capsule carousel d Carousel runners e Water container f Drip tray with grid g Waste container h Central spout cover i Drip catcher 7
Guide to the machine Controls and display a On/Off sensor K For switching the coffee machine on and off b "Profiles" { For saving and editing profiles c "Two portions" ° For preparing two portions of a drink d Drinks sensors For dispensing .
Accessories Accessories supplied Optional accessories – Cappuccinatore glass jug for making hot milk and milk froth Miele accessories and cleaning and conditioning products are available for your coffee machine.
Warning and Safety instructions This coffee machine complies with all relevant legal safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important information on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.
Warning and Safety instructions Safety with children , Caution. The central spout and the steam valve present a danger of burning and scalding. Children's skin is very sensitive and reacts to hot temperatures. Do not allow them to touch hot components of the coffee machine or to place any part of their body under the spouts. ~ Install the coffee machine where it is out of the reach of children. ~ Children under 8 years of age must be kept away from the machine unless they are constantly supervised.
Warning and Safety instructions Technical safety ~ A damaged coffee machine could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine. ~ Before connecting the machine to the mains supply, make sure the connection data (voltage and frequency) on the data plate corresponds to the household supply. Consult a qualified electrician if in any doubt. ~ The electrical safety of this machine can only be guaranteed if correctly earthed.
Warning and Safety instructions ~ Ensure that there is sufficient ventilation around the coffee machine. Otherwise condensation can build up and damage the machine and / or the housing unit. ~ If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the furniture door while the coffee machine is in use. ~ Repairs may only be carried out by a Miele authorised service technician.
Warning and Safety instructions ~ Only use genuine original Miele accessories with this appliance. Using spare parts or accessories from other manufacturers will invalidate the guarantee, and Miele cannot accept liability. Correct use , Caution. The central spout and the steam valve present a danger of burning and scalding. The liquids and steam dispensed are very hot. Please note: – Keep well away from the area underneath the central spout and steam valve when hot liquids and steam are being dispensed.
Warning and Safety instructions ~ Please note the following regarding water: – Only use cold, fresh tap water to fill the water container. Warm or hot water or other liquids could damage the machine. – Change the water every day to prevent a build-up of bacteria. – Do not use mineral water. Mineral water will cause serious limescale deposits to build up in your machine and damage it. – Do not use water from a reverse osmosis unit in this machine. This would damage it.
Warning and Safety instructions ~ Please note the following with regard to cleaning the coffee machine: – Clean the coffee machine and the cappuccinatore daily (see "Cleaning and care"). – Do not use a steam cleaner to clean the machine. Steam could reach electrical components and cause a short circuit. – Descale the coffee machine regularly using the appropriate number of Miele descaling tablets for the water hardness level in your area. Descale the machine more frequently in areas with very hard water.
Preparing the coffee machine for use Please read the operating instructions and take the time to familiarise yourself with the coffee machine before using it for the first time. Before using for the first time ^ The machine must be correctly installed and connected (see "Electrical connection" and "Installation") before it is used for the first time. ^ Remove any protective foil. Clean the coffee machine thoroughly (see "Cleaning and care") before filling it with water and coffee capsules.
Preparing the coffee machine for use Selecting the display Water hardness You can choose from the following options: The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the coffee machine will need to be descaled. – On: the display will always show the date and time (even when the machine is switched off). – Off: the date and time are not displayed when the machine is switched off.
Preparing the coffee machine for use Checking the water hardness level You can use the test strip supplied to check the water hardness level, or your local water supplier will be able to advise you on the hardness of the water in your area. ^ Dip the test strip in your drinking water for a second, then shake off any excess water. The result will be evident after about a minute. You can now set the water hardness level for the coffee machine. Setting the water hardness level ^ Touch X.
Operation The coffee machine is operated by touching the sensors. You are in the drinks menu when the display shows: { Miele Cosi Ristretto To select an option, touch the X and Y arrow sensors to highlight the option you want. Touch the OK sensor to confirm your selection. Exiting a menu or cancelling an action Roma To exit the current menu, touch "Back" #.
Filling the water container Warning. Bacteria can cause infection. It is important to empty and fill the container with fresh tap water every day to avoid the risk of bacteria building up. Only use fresh, cold tap water. Hot or warm water or other liquids could damage the coffee machine. ^ Open the front of the machine. Do not use mineral water. Mineral water will cause serious limescale deposits to build up in your machine and damage it. ^ Lift the water container up and pull it forwards to remove it.
Switching on and off Switching on Switching off ^ Touch the On/Off sensor K. ^ Touch the On/Off sensor K. Tip: If you do not want the water from the rinsing process to flow into the drip tray, place a suitable container underneath the central spout before preparing the first coffee of the day. If coffee has been dispensed, the coffee machine will carry out a rinse automatically before switching off.
Filling the machine with coffee capsules The Nespresso coffee capsules are loaded into the capsule carousel. The capsule carousel has five chambers, each holding four capsules. – or, if you are using different types of coffee, make sure you re-allocate the chambers (see "Allocating the types of coffee (Type allocation)"). The five chambers can be filled with five different types of coffee. It is important to allocate the chambers correctly so that you can select the type of coffee you want to prepare.
Filling the machine with coffee capsules The machine will now align the capsule carousel and check the chambers. You will be able to hear this happening. Taking capsules out of the capsule carousel ^ Pull the capsule runners out and remove the capsule carousel. ^ Make sure you put the capsules into the chambers of the capsule carousel correctly with the foil facing downwards. Please note that the individual capsules sit loosely in the capsule carousel to prevent them from becoming jammed.
Making drinks Making espresso or coffee After a while, if no drink is selected "Two portions °" disappears from the display. Cancelling preparation Drink preparation can be cancelled while "Stop" is showing in the display. ^ Touch the OK sensor. Preparation will be cancelled. ^ Place a cup under the central spout. ^ Touch the arrow sensors until the type of coffee you want is highlighted. Now select the type of drink you want. ^ Touch ., / or y. The coffee or espresso will be dispensed into the cup.
Making drinks Preparing hot milk, milk froth and cappuccino ,Danger of burning and scalding on the steam valve. Steam and water produced are very hot. Do not place any part of your body under the steam valve when it is open. Do not touch hot components. The steam valve must engage in the lower position in order to connect properly with the cappuccinatore. The cappucinatore must always be assembled correctly with valve a above the handle and spout b at the side.
Making drinks Milk can be frothed or dispensed straight into a cup, or heated or frothed into the cappuccinatore jug first and then poured manually into the cup. The spout must be pushed in or pulled out: ^ Place the cappuccinatore into the inset in the drip tray and place a cappuccino cup under the central spout.
Making drinks Preparing cappuccino Preparing hot milk ^ Dispense milk froth into the cup, as described above. Fill the cup 2/3 full with milk froth. ^ Turn the valve on the cappuccinatore anti-clockwise to }. ^ Touch the arrow sensors until the type of coffee you want is highlighted. ^ Touch . to make an espresso. Espresso will be dispensed from the central spout. The cappuccino is ready. Frothing milk in the cappuccinatore ^ Pull the spout out of the lid as far as it will go (|).
Making drinks Making drinks using a profile By using the profiles you can make your coffee or espresso exactly the way you like it (see "Profiles"). If you have already set the machine up for a specific profile, you can select the profile first before dispensing a drink. ^ Touch {. ^ Touch the arrow sensors until "Select profile" is highlighted. Touch the OK sensor. ^ Touch the arrow sensors until the profile you want is highlighted. Touch the OK sensor.
Allocating the types of coffee (Type allocation) There are 16 different types of Nespresso coffee available for use in this machine (as well as occasional "special" brands). They vary in taste, aroma and how they are roasted. Preparation time also affects the taste. You can store five different types of coffee in this machine (e.g. for five different users with different tastes). The capsule carousel has five chambers numbered from 1 to 5.
Allocating the types of coffee (Type allocation) When you have finished making your entry and want to save it, ^ touch the arrow sensors until the tick ( is highlighted. Touch the OK sensor. If you do not want to save your entry, ^ Touch # until all the characters have been deleted and the coffee machine returns to the previous selection. Change type You can only change the type of coffee for those types allocated in addition to the default types.
Changing the portion sizes The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. You can programme the amount of water used for each portion of espresso, coffee or hot water to suit your taste and your cups. A newly saved portion size applies to the currently selected drink type. It is not distinguished by coffee type or chamber. There is a maximum amount which can be programmed for each type of drink.
Changing the portion sizes Setting the portion size from the Settings menu Changing portion sizes for different profiles ^ Touch X. You can change the portion sizes for espresso, coffee and long coffee for each individual profile. ^ Touch the arrow sensors until "Portion size" is highlighted in the display. Touch the OK sensor. ^ Touch the arrow sensors until the coffee drink you want is highlighted. Touch the OK sensor.
Setting up profiles To cater for different tastes and preferences, you can enter up to 7 individual profiles. For each individual profile you can select the portion sizes for each drink (see "Changing the portion sizes"). { John Cosi Y Ristretto Roma X Create profile ^ Touch the arrow sensors until "Create profile" is highlighted in the display. Touch the OK sensor. Letters will now appear in the display. Use the arrows to select the letters you require.
Setting up profiles If you do not want to save your entry, ^ touch # until all characters have been deleted and the coffee machine returns to the previous selection. The most recently created profile is selected as the current profile. Select profile This selection is only possible if you have already created a profile in addition to the standard Miele profile. ^ Touch the arrow sensors until "Select profile" is highlighted in the display. Touch the OK sensor.
Setting up profiles Change profile You can programme the machine so that it always changes back to the Miele standard profile or so that it retains the most recently selected profile. This selection is only possible if you have already created a profile in addition to the standard Miele profile. ^ Touch the arrow sensors until "Change profile" is highlighted in the display. Touch the OK sensor.
Settings You can use the Settings menu to customise the coffee machine to suit your requirements. Calling up the Settings menu ^ Touch X. Changing and saving settings ^ Touch X. ^ Select the setting you want with the arrow sensors and touch the OK sensor. You can now check or alter settings. ^ Touch the arrow sensors until the setting you want is highlighted. Options which are currently selected will have a tick ( next to them. ^ Touch the OK sensor. The setting is now saved.
Settings Possible setting options The factory setting for the option is shown in bold.
Settings Option Available settings Lighting Brightness Machine switched on / machine switched off Switch off after Info Number of drinks Total no. of portions / Espresso / Coffee / Long coffee / Steam No. of uses until descaling System lock On / Off Water hardness Soft Medium Hard Very hard Display brightness Volume Buzzer tones Keypad tone Showroom programme Demo mode ( On/ Off) Factory default Do not reset Reset * Only appears when an additional coffee type has been allocated.
Settings Language Setting the time You can select the language (and country variant of that language) for all the display text. Use the arrow sensors to set the hours and minutes. Tip: If you select the wrong language by mistake, follow the flag symbol F to find the Language option again. Date Time of day Timer You can set the time of day display, the clock format and the time.
Settings Selecting a timer The options are: – Timer 1 Switch on at, Switch off at, Switch off after – Timer 2 Switch on at, Switch off at Switch on at: Please note that the coffee machine will not switch on at the required time if you have activated the system lock. Use the arrow sensors to set the hours and minutes. If the coffee machine has switched itself on using the "Switch on at" function 3 times and no drinks have been dispensed, the machine will not switch itself on again automatically.
Settings Activating and deactivating the timer Lighting If the timer is activated for "Switch on at", the symbol + and the desired switching-on time appear in the display 23:59 hours before, as long as "On" or "Night dimming" are selected. You have the following options: When the system lock is activated, the "Switch on at" option for the timer will not work. Select the timer function you want. The timer function selected is marked with a 9 symbol.
Settings Info (Display information) Water hardness In the "Info" option, the number of portions prepared for each individual drink can be displayed. Please see "Preparing the coffee machine for use" for information about water hardness. You can also see whether more than 50 portions can be dispensed before the machine needs to be descaled ("No. of uses until descaling"). Display brightness Alter the Display brightness using the arrow sensors. To return to the previous display, ^ touch the OK sensor.
Settings Showroom programme (Demo mode) Do not activate this setting for domestic use! The coffee machine can be demonstrated in the showroom or at exhibitions in "demo mode". In this mode the machine lights up but no drinks are prepared or actions carried out. The coffee machine cannot be switched off with the On/Off sensor K when demo mode is activated.
Cleaning and care Quick guide Clean the coffee machine every day to prevent a build-up of bacteria.
Cleaning and care ,Danger of burning. Always allow the machine to cool down before cleaning. Please be aware that water in the drip tray will be hot. Switch the machine off before cleaning the interior. Do not clean the inside of the capsule plate opening. Do not use a steam cleaner to clean the machine. Steam could reach electrical components and cause a short circuit.
Cleaning and care Waste container Clean the drip tray and waste container every day to avoid unpleasant odours and mildew. The waste container will usually contain some residual water from the rinsing process. ^ Lift the waste container and pull it forwards to remove. ^ The waste container can be cleaned in the dishwasher or by hand using hot water and a little washing-up liquid. Dry with a cloth. Drip tray with grid Clean the drip tray every day to avoid unpleasant odours and mildew.
Cleaning and care ^ The drip tray and grid can be cleaned in the dishwasher or by hand using hot water and a little washing-up liquid. Dry all parts thoroughly. Grille with drip tray cover Make sure that the metal contact discs on the drip tray are cleaned and dried properly. The discs will not be able to detect that the drip tray is full if they are dirty or damp. ^ Clean the space under the drip tray ^ Push the drip tray back into the coffee machine.
Cleaning and care Capsule carousel and carousel runners ^ Also clean the area under the carousel runners. ^ Open the front of the coffee machine. Pull the carousel runners out as far as possible and remove the capsule carousel. It is particularly important to clean the sensor which is used to recognise the capsule chambers as well as the recess in the floor. ^ Dry everything with a soft cloth. ^ Place the carousel runners on the guide rails. ^ Insert the capsule carousel.
Cleaning and care Central spout cover and drip catcher ^ Open the front of the coffee machine. ^ Push the cover back onto the central spout. Interior Take all removeable parts out of the interior and ^ clean the interior with a solution of lukewarm water and a little washing-up liquid. ^ Dry the interior using a soft cloth. ^ Replace all parts in the machine. ^ Push up and remove the cover in the middle of the inside of the machine front.
Cleaning and care Capsule plate How quickly the capsule plate becomes soiled will depend on the content of natural oils in the coffee used. It should be cleaned once a month (or more often, if necessary) using the cleaning tablets supplied with the machine, and at the latest, when the machine is descaled. The cleaning tablets for degreasing the capsule plate have been specially formulated for use in this coffee machine and are available from your Miele dealer or Miele (see "Optional accessories").
Cleaning and care Cappuccinatore Clean the cappuccinatore regularly, preferably once a day after use. The lid of the cappuccinatore can be dismantled for cleaning. It is best to clean the cappuccinatore in the dishwasher if possible - all parts are dishwasher safe. ^ Dismantle the cappuccinatore lid. Remove the spout and valve. ^ Push the steam valve down and pull the rubber sleeve off. ^ Use a mild solution of hot water and washing-up liquid to clean the rubber sleeve and the tip of the steam valve.
Cleaning and care Machine front If soiling is not removed promptly it could cause the surface of the machine to alter or discolour. Remove any soiling immediately. Make sure that water cannot get in behind the display. ^ Reassemble the parts of the lid as shown. Check that the cappuccinatore is correctly assembled – and that there is no gap between the two parts of the lid. – Also make sure that the reassembled lid is fitted onto the capuccinatore jug correctly.
Cleaning and care Maintenance The capsule hopper in the brew unit needs to be replaced after approx. 15,000 coffee capsules have been dispensed. Replacement capsule hoppers are available from your Miele dealer or from Miele (see "Optional accessories"). ^ Touch y. ^ Touch the arrow sensors until "Maintenance" is highlighted in the display. Touch the OK sensor. The capsule hopper inside the machine will be lowered. "Remove capsule plate and change the capsule hopper" will then appear in the display.
Descaling Warning. When descaling the machine, cover delicate surfaces and natural flooring or place a tea towel over the waste container to prevent damage from splashes of descaling solution. Ensure that any splashes of descaling solution are wiped up immediately. When 0 is reached, the coffee machine will lock out. "Start descaling?" will appear in the display. You can switch the coffee machine off if you do not want to run the descaling programme at this time.
Descaling Only use the Miele descaling tablets. Other types of descaling agents will damage the coffee machine and affect the taste. When "Remove capsule plate Insert descaling funnel and close the door" appears, ^ Follow the instructions given in the display. ^ Fill the water container up to the k mark with lukewarm water. ^ Drop two descaling tablets in the water. Follow the instructions for the mixing ratio carefully.
Descaling When "Rinse the water container and fill with fresh water up to the k symbol" appears, ^ remove the water container and rinse it carefully with clean water. Make sure that no descaling agent is left in the water container. Also empty the waste container. Descaling without being prompted by the display ^ Touch y. ^ Use the arrow sensors to highlight "Descale". The descaling process cannot be cancelled once it has started. The process has to be carried through to the end.
Problem solving guide With the aid of the following guide, minor problems can be easily corrected without contacting Miele. ,Warning. Do not open the outer casing of the machine. Repairs may only be carried out by a suitably qualified and competent person in strict accordance with national and local safety regulations. Repairs and other work by unqualified persons can cause considerable danger to users. The manufacturer cannot be held liable for unauthorised work.
Problem solving guide Message Possible cause and remedy Fault 72 A coffee capsule has become jammed between the capsule carousel and the capsule plate. ^ Try to remove the capsule plate. ^ Look for the capsule in the brewing area and try to remove it. Dispose of this coffee capsule as it is likely to be damaged or dented and could become stuck again if reused. ^ Insert the capsule plate and close the front of the coffee machine.
Problem solving guide Message Possible cause and remedy Fault 73 Fault 76 There is no coffee capsule on the capsule plate: The capsule is probably stuck in the brew unit. ,Danger of injury. Do not touch the brew unit. Only use a wooden spoon handle or similar to do this. ^ Try to remove the coffee capsule from the upper area of the brew unit using a wooden spoon handle or similar. ^ Replace all parts and close the machine front.
Problem solving guide Message Possible cause and remedy Fault 75 The sensors which recognise the waste container are dirty. ^ Remove the waste container and clean the interior where it is located. Ensure that the space to the top right and left is clean. ^ Push the waste container into the machine as far as it will go. Close the front. The coffee capsule was not pushed onto the capsule plate. ^ Open the machine front and remove the capsule carousel and carousel runners.
Problem solving guide Message Possible cause and remedy Fault 75 ^ Push the coffee capsule with the handle of a wooden spoon or similar item back into the waste container. ^ Close the machine front. If the message appears again or if you cannot remove the capsule, contact Miele. "Push water container right in" The water container has not been correctly positioned inside the machine. ^ Remove the water container and replace it.
Problem solving guide Unusual performance of the coffee machine Problem Possible cause and remedy When the coffee machine is switched on the lighting does not come on. The lighting has been switched off. ^ Switch it back on (see "Settings - Lighting"). The display remains dark when the coffee machine is switched on using the On/Off sensor K. The lighting is faulty. ^ Call Miele. The On/Off sensor K was not touched for long enough.
Problem solving guide Problem Possible cause and remedy The coffee machine does not switch itself on, although the "Switch on at" setting has been activated for the timer. The system lock is activated. ^ Deactivate the system lock (see "Settings - System lock"). The day of the week has not been selected. ^ Check the timer settings and change these if necessary (see "Settings - Timer"). The machine was not used after being switched on automatically 3 times in succession.
Problem solving guide Problem Possible cause and remedy Drinks are not dispensed, even though there are coffee capsules in the capsule carousel and there is enough water in the water container. The water container is not positioned correctly inside the machine. ^ Remove the water container and replace it. A coffee capsule has jammed in the capsule carousel. ^ Open the front of the coffee machine.
Problem solving guide Problem Possible cause and remedy Milk (steam) and espresso / coffee cannot be prepared at the same time. The energy-saving Eco mode is activated. In this mode, the steam system is heated up for preparing hot milk or milk froth. After preparation the steam system will cool down again. If you want to prepare milk without having to wait until the steam system has heated up, ^ switch off "Eco mode" in the "Settings" menu.
Problem solving guide Problem Possible cause and remedy The steam valve The steam valve is blocked. has been pushed ^ Open the front of the coffee machine. downwards and has engaged with ^ Push the steam valve back down again, and pull the rubber sleeve off. the cappuccinatore, but no steam is coming out. Milk is not being heated or frothed. ^ Using the small end of the tool for removing the capsule hopper, turn the tip of the steam valve to the left to remove it.
Problem solving guide Unsatisfactory results Problem Possible cause and remedy Coffee residue is left behind in the coffee cups. The capsule plate is dirty. The coffee is not hot enough. The cup has not been pre-heated. Pre-heat the cups, e.g. with hot water. The smaller and thicker the cup, the more important it is to pre-heat it. The coffee is weak. Too much water was saved as the portion size for the type of coffee capsule used. ^ Change the portion size (see "Changing the portion size").
After Sales / Guarantee In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only). When contacting your Dealer or Miele, please quote the model and serial number of your machine. These are shown on the data plate inside the machine. N.B.
Saving energy Changing the following settings from their factory default will increase the energy consumption of the coffee machine: – Eco mode – Lighting – Time of day display – Timer When altering these settings, the message "This setting increases energy consumption" will appear in the display.
Electrical connection U.K., ZA, IRL All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplied to the machine until after installation work has been carried out.
Installation Building-in and combination options This machine is designed to be builit into a tall unit or in a wall unit.
Installation It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them. Ventilation Ensure that the back of the coffee machine is sufficiently ventilated, so that steam and warm air can dissipate freely. Otherwise condensation can build up and damage the machine or the housing unit. Installation Before installation make sure that there is no power supply to the machine.
Installation ^ Connect the machine to the electrical supply. ^ Push it all the way into the niche until you feel resistance. Ad usting the hinges If the machine front becomes difficult to open or close after installation you can adjust the hinges to realign it: Take care not to damage the electrical connection, when pushing the coffee machine into the the niche. ^ Open the front of the machine, and partially tighten the side socket screws.
Alteration rights reserved / 1313 CVA 6431, CVA 6431 C M.-Nr.