Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Accessories
- Operation
- Before using for the first time
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Dispenser adjustment
- Preparing beverages
- Coffee the way you like it
- Portion size
- Resetting drinks
- User profiles
- User profiles: Creating and editing your own drinks
- MyMiele
- Settings
- Accessing the "Settings" menu
- Changing and saving settings
- Setting options
- Language
- Time of day
- Date
- Timer
- Eco mode
- Lighting
- Start screen
- Info (displaying information)
- Locking the coffee system (System lock )
- Water hardness
- Display brightness
- Volume
- Dispenser adjustment
- Factory default setting
- Showroom program (Demo mode)
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Sensor cover
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
- Copyright and licenses
Frequently Asked Questions
79
Message Possible cause and solution
F234 Cup protection switch-off has been activated three
times since switching on the coffee system. The cups
or glasses being used are not recognized by the auto-
matic dispenser adjustment.
Use only cups or glasses that can be recognized
by the automatic dispenser adjustment.
There is a fault with the automatic dispenser adjust-
ment.
Turn the machine off with the On / Off button.
Wait for 2 minutes before turning it back on again.
Too much ground coffee There is too much ground coffee in the coffee chute.
If more than one level scoop of ground coffee is
added to the coffee chute, the brew unit cannot
process the coffee. The ground coffee will be directed
into the waste unit and the fault message will appear
in the display.
Turn the machine off with the On / Off button.
Remove and clean the brew unit (see "Cleaning
and care – Brew unit").
Remove the ground coffee inside the coffee sys-
tem, e.g. with a vacuum cleaner.
Use the coffee scoop supplied to add ground cof-
fee to the ground coffee chute. Add only one por-
tion of ground coffee to the chute.
Push the water container in
until it engages
The water tank is not sitting properly in the appliance.
Remove the water tank and replace it.
This fault message also appears if the water tank was
not correctly filled and fitted for descaling.
Fill the water tank to the descaling marking and
restart the descaling program.