Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the machine
- Controls and indicators
- Operation
- Miele@home
- Before using for the first time
- Filling the coffee bean container
- Filling the water container
- Switching on and off
- Spout adjustment
- Making drinks
- Expert mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and waste container
- Cleaning the drip tray cover
- Cleaning the water container
- Cleaning the central spout
- Cleaning the cup rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door and drip tray
- Cleaning the front of the machine
- Maintenance programmes
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the machine
- Problem solving guide
- After sales service and warranty
- Accessories
- Installation
- Technical data
- EU Conformity declaration
- UK Conformity declaration
Cleaning and care
63
The drip tray is located at the bottom on
the inside of the machine door.
Remove and empty the drip tray on a
regular basis. The drip tray is
dishwasher safe.
Open the machine door.
Remove and clean the drip tray.
Remove the following parts from the
interior:
- Water container
- Drip tray
- Maintenance container
- Brew unit
- Bean containers
Tip: Use your vacuum cleaner to
remove dry ground coffee residues.
Clean the interior and the inside of
the machine door by hand with a
clean and slightly damp cloth/
microfibre cloth. After cleaning, wipe
the interior and machine door dry
using a soft cloth.
Put all the parts back in place,
including the drip tray.
Close the machine door.
Cleaning the front of the
machine
If soiling is not removed promptly, it
could cause the surface to alter or
discolour.
Remove any soiling on the front of
the machine straight away.
Make sure that water cannot get
behind the display.
Clean the front of the machine after
descaling. If possible, wipe up any
spillages of descaling agent
immediately.
Tip: Before cleaning the control panel,
open the machine door to prevent
accidental operation.
Clean the front of the machine with a
clean and slightly damp cloth/
microfibre cloth. After cleaning, wipe
the surfaces dry using a soft cloth.
Tip: You can also use a Miele microfibre
cloth to clean the front.