Operating and installation instructions Built-in coffee machine To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety.
Contents Caring for the environment .............................................................................. 2 Warning and Safety instructions...................................................................... 6 Guide to the machine ....................................................................................... 15 Controls and indicators .................................................................................... 17 Operation......................................................
Contents Brewing temperature ........................................................................................... 39 Pre-brewing the ground coffee............................................................................ 39 Profiles................................................................................................................ Creating a profile ................................................................................................. Changing drinks within a profile ........
Contents Cleaning and care ............................................................................................. Overview of cleaning intervals............................................................................. Cleaning by hand or in the dishwasher ............................................................... Unsuitable cleaning agents ................................................................................. Cleaning the drip tray and waste container..............................
Warning and Safety instructions This coffee machine complies with all the stipulated safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the coffee machine.
Warning and Safety instructions Correct application This coffee machine is intended for home use. This coffee machine is not intended for outdoor use. This coffee machine must not be used at altitudes above 2000 m. It must only be used as a domestic appliance to make espresso, cappuccino, latte macchiato, tea etc. Any other use is not permitted.
Warning and Safety instructions Safety with children Danger of burning and scalding on the dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts. Install the coffee machine where it is out of the reach of children. Children under 8 years of age must be kept away from the coffee machine unless they are constantly supervised.
Warning and Safety instructions Technical safety Installation work or repairs should only be carried out by a Miele authorised technician. Unauthorised or incorrect installation work or repairs can pose considerable danger to users. A damaged coffee machine could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine.
Warning and Safety instructions A minimum installation height of 850 mm must be observed. This coffee machine must not be installed behind a closed cabinet door because heat and moisture can build up behind it. This can result in damage to the machine and/or furniture unit. The coffee machine must be disconnected from the electricity supply during repair work. While the machine is under warranty, repairs should only be undertaken by a Miele authorised service technician.
Warning and Safety instructions Correct use Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the nozzles. Ensure that the central spout is clean and fitted correctly. Before opening the door, remove any containers from the drip tray in the machine door.
Warning and Safety instructions Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins. Do not use coffee beans which have been treated with caramel, sugar or other substances including sugary liquids. Sugar will damage the coffee machine. Only use milk without additives.
Warning and Safety instructions Cleaning and care Clean the coffee machine and the milk flask daily, particularly before using them for the first time. All parts of the milk system need to be cleaned thoroughly and regularly. Milk contains bacteria which proliferate rapidly with inadequate cleaning. Descale the coffee machine regularly depending on the water hardness level in your area. Descale the machine more frequently in areas with very hard water.
Warning and Safety instructions For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the stainless steel surfaces. These will damage the stainless steel surfaces, causing them to lose their dirtrepellent protective coating. The finish on stainless steel surfaces is susceptible to scratching. Even magnets can cause scratching.
Guide to the machine Exterior view 1 2 3 6 4 5 a On/Off button b Control panel c Door handle d Height-adjustable central spout with lighting e Drip tray cover f Milk flask 15
Guide to the machine Interior view a Bean container b Milk valve c Height-adjustable central spout with lighting d Grinder setting e Bean container f Fan outlet g Water container h Drip tray with lid i Brew unit j Waste container k Maintenance container l Drip tray 16
Controls and indicators 6 a On/Off button h OK sensor For switching coffee machine on and For confirming display messages and off saving settings b Drink buttons For making drinks c Display For showing information about the current action or status d sensor – For making other drinks, e.g. Ristretto, Cappuccino italiano – For making a pot of tea or coffee – Menu: Settings e Profiles sensor For creating and managing profiles f Maintenance sensor Maintenance programmes, e.g.
Controls and indicators Drink button symbols Espresso Coffee Long coffee Cappuccino Latte macchiato Caffè latte Hot milk Milk froth Tea water 18
Operation Sensors To operate the coffee machine, touch the sensors with your finger. An audible signal is generated each time a sensor is touched. You can adjust the volume of the signal tones or switch the tones off (see “Settings – Volume”). Drinks menu When the following appears in the display, you are in the drinks menu: Select drink. 12:00 Miele Select drink You can find more drinks in the Further menu ( sensor control).
Operation Name Z A B C D E F - To enter a character, highlight the one you want and confirm your choice with OK. - To delete a character, touch the sensor control. - To save the name, select the tick and confirm with OK.
Operation Symbols in the display The following symbols may also appear in the display in addition to the text: Symbol Explanation This symbol indicates the “Settings” menu and the “Language” menu option. This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information. This symbol appears if the system lock is activated. Operation is locked.
Miele@home Your coffee machine is equipped with an integrated WiFi module. In order to use it, you will need: - A WiFi network - The Miele@mobile app - A Miele user account The user account can be created via the Miele@mobile app. Availability of the WiFi connection The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures.
Before using for the first time Before using for the first time Setting up the network (Miele@home) Connect the coffee machine to the electricity supply. You can connect your coffee machine to your home WiFi network. Install the coffee machine by building it in. The following appears in the display during set-up: Set up “Miele@home” Remove any notices from the machine. Tip: You can also choose to set up Miele@home for your coffee machine at a later point. In this case, select Skip.
Before using for the first time Setting the water hardness level Contact your local water supplier to find out your local water hardness range if necessary. More information can be found under “Settings – Water hardness”. Enter your local water hardness (in °dH) and confirm with OK. Selecting the Performance mode You can select the appropriate mode to suit your personal preferences (see “Settings – Performance mode”). - Eco mode: This is an energy-saving mode.
Filling the coffee bean container Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each portion. This requires the bean containers to be filled with coffee beans. Risk of damage to the grinder due to incorrect operation. The coffee machine will be damaged if the bean container is filled with unsuitable substances such as liquids, ground coffee or coffee beans treated with sugar, caramel or similar.
Filling the water container Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day. Risk of damage due to incorrect operation. Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine. Bottled mineral water leaves too much limescale in the coffee machine. Only use cold, fresh tap water to fill the water container.
Switching on and off Switching the coffee machine on Switching the coffee machine off Touch the On/Off button . Touch the On/Off button . The coffee machine heats up and rinses the pipework. Hot water will run out of the central spout. If coffee has been dispensed, the coffee machine will rinse the coffee pipework automatically before switching off. You can now make drinks. If the coffee machine is already at operating temperature, rinsing will not take place.
Spout adjustment The central spout cannot be manually adjusted. Before making the drink, the central spout moves down and the cup sensor stops it at the optimum height for the cups or glasses being used. When the coffee machine is switched off, the central spout will be in the middle position. When a maintenance programme is being carried out, the central spout will move to the height of the maintenance container or into a low maintenance position.
Making drinks Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. Making coffee with and without milk The following drinks can be made: - Ristretto is a strong, concentrated espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water.
Making drinks Milk preparation Milk or milk alternatives (e.g. soya milk) containing added sugar can clog up the milk pipe and the rest of the milk pipework. Residues from unsuitable liquids can interfere with milk preparation. The milk used must not contain any additives. Only use pasteurised cow's milk. Tip: Using cold cow's milk (< 10 °C) with a protein content of at least 3 % will produce the perfect milk froth. You can select milk with a fat content according to preference. With whole milk (at least 3.
Making drinks Making a coffee Place a cup under the central spout. Push the milk flask back into the coffee machine until it clicks into place. Touch the sensor for the drink you want. Tip: It is easier to remove the milk flask with both hands. The drink will be dispensed from the central spout into the cup. Cancelling a drink Touch the lit orange symbol on the control panel again. When preparing drinks with several ingredients (e.g.
Making drinks Making a DoubleShot of coffee Coffee pot Press the sensor control immediately before or after you start making a drink. You can make several cups of coffee one after the other automatically with the Coffee pot function (maximum of 1 litre). Dispensing starts and the sensor control lights up. 2 portions of coffee beans will be ground and brewed. Making 2 portions ( sensor control) You can dispense 2 portions of a drink into 1 large cup or into 2 cups at the same time.
Making drinks Tea The coffee machine is not intended for commercial or scientific purposes. Temperatures given are approximate and can vary according to ambient conditions. To make tea, you can select from the following options: - Japanese tea is a high-quality green tea which boasts a fine, fresh, “green” taste. Dispensed temperature: approx. 65 °C, brewing time: approx. 1.5 minutes - White tea is a green tea where only the young buds of the tea plant are used and processed very gently.
Making drinks Follow the instructions for making tea on the tea packaging. The amount of tea required varies from one type of tea to another. Always follow the recommendations of the manufacturer on the packaging or of the retailer. You can adjust the amount of water according to the type of tea and the size of the cup (see “Portion size”). TeaTimer You can use the TeaTimer function to start a minute minder when making tea. There is a preset brewing time for the type of tea selected.
Making drinks Remove the tea filter or tea bag when the desired brewing time has elapsed. Dispensing warm or hot water Teapot - Hot water at approx. 90 °C The Teapot function allows you to make a large quantity of tea (maximum of 1 litre). The type of tea selected determines the preset temperature. The drinks menu is displayed. You can choose between the following options: - Warm water at approx. 65 °C The drinks menu is displayed. Place a suitable container underneath the central spout.
Expert mode The Expert mode function allows you to change the portion size while the drink is being made. The setting will not be saved and will only apply for the current drink. Switching Expert mode on and off The drinks menu is displayed. Touch the sensor. Select Settings | Expert mode. Select the option you want. Confirm with OK. The setting is now saved. Expert mode: changing the portion size The drinks menu is displayed.
Grinder setting When the beans are ground correctly, the coffee or espresso will flow evenly into the cup with a good crema. The crema should have an even hazelnut brown colour. The grinder setting you select will be used for all coffee drinks. There are various ways to tell whether the coffee grinder is set correctly. The coffee has been too coarsely ground if: - Espresso or coffee flows into the cup too quickly, - the crema is very pale and uneven, Set a finer grinder setting.
Parameters Displaying and changing parameters You can change the portion size for all drinks. In addition, you can set the “Amount of coffee”, “Brew temperature” and “Prebrewing” parameters for each coffee drink individually. Touch the sensor. Select a drink and confirm with OK. The parameters that can be changed for this drink are displayed. Once you have selected a drink, the current settings for the following appear: Amount of coffee, Brew temperature and Pre-brewing.
Parameters Tip: For the drinks pictured on the control panel, you can change the portion size by pressing and holding the button down while the drink is being dispensed. To do this, keep the drinks sensor pressed until the machine starts dispensing. During dispensing, Save appears in the display. Ground quantity The coffee machine can grind and brew 7.5–12.5 g of coffee beans per cup. The greater the quantity, the stronger the coffee.
Profiles In addition to the Miele drinks menu (Miele profile), you can create individual profiles to cater for different tastes and preferences. Within the profile, you can adjust the portion sizes and parameters individually for all drinks. The name of the current profile is shown in the top left of the display. Creating a profile You can now change the drinks individually. Making drinks stored in a profile Touch the sensor. Select the profile you want. Select the drink you want.
Profiles Select the option you want and confirm with OK. Changing the name This option can only be selected if a profile has been allocated in addition to the Miele standard profile. Select Change name and confirm with OK. Change the name as required: - To delete a character, touch the sensor. - To enter a new character, highlight the one you want and confirm your choice with OK. - To save the modified name, select the tick and confirm with OK.
MobileStart With MobileStart you can, for example, start making a drink via the Miele@mobile app. You will only be able to use MobileStart if Miele@home has been set up for your coffee machine. Danger of burning and scalding on the dispensing spouts. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the central spout or touch hot components.
Settings You can use the “Settings” menu to customise the coffee machine to suit your requirements. - Night dimming: To save energy, the time is only displayed between 5 am and 11 pm. Displaying and changing Settings Clock format The drinks menu is displayed. - 12-hour display (12 h) Touch the sensor control. Setting Select Settings and touch OK. Set the hours and the minutes. Select the menu option that you want to display or change. Confirm with OK.
Settings automatically. This prevents the coffee machine from switching itself on unnecessarily, for example, whilst you are away on holiday. The programmed times will, however, remain in the memory and will be reactivated when the machine is next switched back on manually. If you have set the time to be displayed while the machine is switched off (Show | On or Night dimming), the symbol and the desired switching-on time will appear in the display 23:59 hours beforehand.
Settings Eco mode Eco mode is an energy-saving mode. The system does not heat up until someone starts making a drink. Barista mode This performance mode has been optimised for unadulterated coffee enjoyment. Users can enjoy coffeebased drinks without any delay as the coffee machine remains heated to the brewing temperature. This mode consumes more energy than Eco mode. - Cleaning status messages or cleaning prompts are suppressed and delayed until the machine is next switched on.
Settings Water hardness °dH mmol/l Calcium content mg/l Ca 2+ Setting s or ppm (mg Ca 46 2+ Water hardness °dH mmol/l /l) Calcium content mg/l Ca 2+ Setting s or ppm (mg Ca 2+ /l) 1 0.2 7 1 30 5.4 214 30 2 0.4 14 2 31 5.5 221 31 3 0.5 21 3 32 5.7 229 32 4 0.7 29 4 33 5.9 236 33 5 0.9 36 5 34 6.1 243 34 6 1.1 43 6 35 6.3 250 35 7 1.3 50 7 36 6.4 257 36 8 1.4 57 8 37–45 6.6–8.0 258–321 37–45 9 1.6 64 9 46–60 8.2–10.
Settings The system lock is reactivated when the coffee machine is next switched off. Miele@home The following options may appear under Miele@home: - Set up: This option only appears if the coffee machine has never been connected to a WiFi network or if the network configuration has been reset. - Deactivate*/Activate*: The settings for the WiFi network are retained, but the network is switched on or off. - Connection status*: Information about the WiFi connection is displayed.
Settings Running a RemoteUpdate Information about the content and scope of an update will be provided in the Miele@mobile app. A message will appear in your coffee machine display if a software update is available. You can install the update immediately or postpone this until later. When the coffee machine is switched on again, you will be reminded about the update. Deactivate RemoteUpdate if you do not want to install the update. The update may take several minutes.
Cleaning and care Risk to health due to inadequate cleaning Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Cleaning by hand or in the dishwasher The brew unit is not dishwasher safe. Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent. The following components must be cleaned by hand only: - Central spout stainless steel cover - Brew unit - Bean containers and lids Risk of damage as a result of excessively high dishwasher temperatures. Components may be ruined (e.g.
Cleaning and care Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Cleaning and care - Steel wool or stainless steel wire scourers Cleaning the drip tray and waste container Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. If the pipework has just been rinsed, wait a while before removing the drip tray. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Clean the drip tray, lid and waste container in the dishwasher or wash them by hand using warm water and a little washing-up liquid. Dry all parts thoroughly. Clean the inside of the coffee machine underneath where the drip tray goes. Cleaning contacts Remove the drip tray and waste container from the machine. Empty the waste container after removing it from the drip tray. The waste container may contain a small amount of water from rinsing as well as the leftover coffee grounds.
Cleaning and care Reassembling the drip tray Cleaning the drip tray cover Attach the drip tray lid as follows: slide the lid under the lug next to the contacts and apply pressure to the lid until the catches at the sides audibly click into place. Remove the drip tray cover as follows: apply pressure to the rear edge so that the cover tips forwards and you can remove it easily. The drip tray cover can be cleaned in the dishwasher, or by hand using warm water and a little washing-up liquid.
Cleaning and care Clean and dry the surface that the water container sits on. Fill the water container with fresh, cold tap water. Pull the central spout's stainless steel cover forwards to remove it. Then clean it. Push the water container all the way into the coffee machine until you feel a resistance. Close the machine door. Cleaning the central spout Clean the central spout's stainless steel cover by hand only, using warm water and a little washing-up liquid.
Cleaning and care Do not remove the milk pipe connecting piece. If necessary, clean the connecting piece with the cleaning brush. Grip the dispensing unit by the sides and pull it down to remove it. Take the dispensing unit apart, separating it into 3 components: the Y-piece, the spouts and the holder. Clean all parts thoroughly. Clean the area around the central spout with a damp cloth.
Cleaning and care Fit the dispensing unit back together. Press down firmly so that the spouts become securely connected to the holder. Press the two retainers together (see arrows). The cup rim sensor is released. Insert the dispensing unit into the coffee machine and connect the milk pipe. Refit the stainless steel cover. Close the machine door.
Cleaning and care Cleaning the milk valve (daily) The milk valve seal can be damaged by objects with sharp edges or similar. Do not use any sharp-edged objects (such as knives) to clean the milk valve. Rinse the milk pipework in the lid under running water and then place the lid in the dishwasher. If no water runs out of the connecting piece , clean it with the cleaning brush. Clean the glass flask. Dry all parts and especially the threads on the lid and on the glass with a clean cloth.
Cleaning and care instead of milk froth, the milk sprays out. Clean the milk valve more often if necessary. The milk valve cover should only be cleaned by hand. Open the appliance door. Remove the bean container on the left and the maintenance container. Remove the central spout’s stainless steel cover. 3 2 1 Detach the milk pipework from the dispensing unit on the central spout and from the milk valve silicone seal ( and ).
Cleaning and care Press the latches on the left and right-hand sides of the milk valve holder and pull the holder forwards to remove it. Pull the stainless steel bolt upwards and out. Clean the individual components of the milk valve in the dishwasher. Tip: If there are any dry milk residues on the front, soak the stainless steel bolt in warm water and a little washingup liquid. Fitting the milk valve Insert the stainless steel bolt from above.
Cleaning and care Connect together the angular moulded hose and longer milk pipework. Start by attaching the moulded hose to the top of the central spout. The black connecting piece should be pointing to the rear. Tip: If necessary, turn the milk pipework towards the back at the connecting piece on the right-hand side. Then, connect the bottom end of the moulded hose to the dispensing unit. Insert the milk pipework into the milk valve on the left and right-hand sides.
Cleaning and care Cleaning the bean containers Risk of damage from incorrect use and cleaning. Immersing the bean containers in liquids can result in malfunctions. If they are taken apart, bits may break off or the mechanism may no longer work properly once they are reassembled. Do not disassemble the bean containers. Do not immerse the bean containers in liquids, e.g. soapy water. Coffee beans contain oils which can deposit themselves on the walls of the bean containers and hinder the flow of the beans.
Cleaning and care Cleaning the interior, inside of the machine door and drip tray Clean the interior and front of the machine as part of the normal cleaning process. For instance, if you remove the water container, use this as an opportunity to clean the area under the water container at the same time. Clean the interior and the inside of the machine door by hand with a clean and slightly damp cloth/ microfibre cloth. After cleaning, wipe the interior and machine door dry using a soft cloth.
Cleaning and care Maintenance programmes Rinse the milk pipework The coffee machine has maintenance programmes for: If you have made a drink with milk, the coffee machine will rinse the milk pipework automatically after a few minutes. You can also start the Rinse the milk pipework function manually. - Rinsing the machine - Rinsing the milk pipework - Cleaning the milk pipework Cleaning the milk pipework - Degreasing the brew unit The milk pipework must be cleaned at least once a week.
Cleaning and care It is available to order via the Miele webshop or directly from Miele (see the end of this booklet for contact details). Add 2 sticks of the cleaning agent for milk pipework to the water container. Fill the water container to the mark with lukewarm water and stir the solution. Follow the instructions for the mixing ratio carefully. Fill the water container with the specified amount of water. Otherwise, cleaning will be incomplete.
Cleaning and care Follow the instructions in the display. Remove the water container and the brew unit. Clean the interior of the machine. Rinse the brew unit by hand and refit it with a cleaning tablet in it. will appear in the display. Cleaning the brew unit and interior The moving parts of the brew unit are lubricated. Cleaning agents and washing-up liquid will damage the brew unit. Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent.
Cleaning and care Push the brew unit containing the cleaning tablet back into the coffee machine. Wipe any remaining coffee residue from the filters. One filter is located in the funnel and the other to the left of the funnel. The process of removing the brew unit causes ground coffee to drop into the drip tray. Press the button under the handle of the brew unit and, whilst doing so, turn the handle backwards . Remove the drip tray and clean the lid.
Cleaning and care depend on the water hardness level in your area. Limescale must be removed regularly. The appliance will guide you through the descaling process. Various messages will appear in the display, e.g. you will be prompted to empty the drip tray or fill the water container. Descaling must be carried out. The process takes approx. 35 minutes. The coffee machine will give you plenty of warning when it needs to be descaled.
Cleaning and care Add 2 descaling tablets to the water container. Fill the water container to the mark with lukewarm water. Follow the instructions for the mixing ratio carefully. Fill the water container with the specified amount of water. Otherwise, descaling will be incomplete. Carrying out descaling Push the water container back into the machine. Follow the further instructions given in the display. When Rinse and insert water the container. container.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. Messages in the display Error messages must be confirmed with OK, otherwise the message can reappear in the display even though the problem has been remedied.
Problem solving guide Problem Cause and remedy F73 or The brew unit cannot be positioned correctly or is soiled. It is not possible to press the ground coffee. Check whether you can remove the brew unit. If you can remove the brew unit, rinse it under running water. Check the brew unit Push the coffee ejector of the brew unit into the correct position (see illustration). Place the water container in the coffee machine and close the machine door. Do not insert the brew unit.
Problem solving guide Problem Cause and remedy F233 The cup rim sensor is not inserted or is incorrectly inserted. If the central spout is moving upwards and the cup rim sensor is bumped, e.g. with a cup, the cup rim sensor loses its reference position. Confirm the message with OK. Refit the cup rim sensor. Cup rim detection remains inactive and the central spout stays in the top position until the coffee machine is next switched on.
Problem solving guide Unusual performance of the coffee machine Problem Cause and remedy The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough. Touch and hold the On/Off button for at least 3 seconds. The plug is not inserted in the socket correctly. Insert the plug into the socket. The fuse has tripped because the coffee machine, voltage or another appliance is defective.
Problem solving guide Problem Cause and remedy The brew unit cannot be The brew unit is not positioned correctly. removed. If necessary, move the handle on the brew unit back to the start position. Close the machine door. Switch the coffee machine off. Wait approx. 1 minute before switching the coffee machine back on. This will initialise the brew unit motor and put it back into the start position. If necessary, repeat these steps.
Problem solving guide Unsatisfactory results Problem Cause and remedy The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cup, for example, with hot water. The brewing temperature has been set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean by hand Degrease the brew unit.
Problem solving guide Problem Cause and remedy The coffee tastes weak. The coffee grounds in the waste container are sludgy and grainy. Less coffee is being brewed because insufficient coffee beans are getting into the grinder. Have you used a dark roast? This type of coffee bean is often more oily. These oils can cling to the inside of the bean containers and hinder the flow of beans.
After sales service and warranty After sales service Warranty In the event of a fault which you cannot correct yourself, or if the machine is under guarantee please contact: For information on the appliance warranty specific to your country please contact Miele. See back cover for address. - your Miele Dealer or - Miele. Contact details for Miele are given at the end of this booklet. N.B.
Accessories These products and other useful accessories can be ordered via the Miele webshop, from Miele (see back cover for contact details) or from your Miele dealer. - Microfibre cloth for removing finger marks and light soiling - Cleaning agent for milk pipework for cleaning the milk system - Cleaning tablets for degreasing the brew unit - Descaling tablets for descaling the water pipework - CJ Jug 1.
*INSTALLATION* Installation Electrical connection Before connecting the coffee machine, make sure that the connection data on the data plate (voltage and frequency) matches that of the electricity supply. This data must correspond in order to avoid the risk of damage to the coffee machine. If in any doubt, consult a qualified electrician. The necessary connection data is given on the data plate inside your appliance. The fuse rating must be at least 10 A.
*INSTALLATION* Installation Building-in dimensions Installation in a tall unit A minimum installation height of 850 mm must be observed. All dimensions are given in mm. The machine can be combined with other Miele built-in appliances. In this case, there must be a full-width, closed shelf between them. If the machine it to be combined with a suitable built-in plate/food-warming drawer, no shelf is required in between.
*INSTALLATION* Installation Installation and connections All dimensions are given in mm.
*INSTALLATION* Installation Building in the coffee machine Danger of injury due to incorrect operation. A machine that has not been built in is not safe and can cause injuries. Do not operate the coffee machine unless it has been built in. Danger of damage due to incorrect operation. If the ambient temperature range is not observed, the coffee machine may not function properly. The coffee machine may only be operated within an ambient temperature range of +16 °C to +38 °C.
*INSTALLATION* Installation Open the appliance door. The door opening limiters can be removed, allowing you to increase the opening angle to approx. 170°. This makes it easier to remove the bean containers, for example. Two TX20 (25 mm) screws are included with the coffee machine. Secure the coffee machine to the side walls of the furniture unit using the screws supplied. Tighten both screws by hand.
Technical data Electricity consumption in standby: < 0.6 W Electricity consumption in networked standby: < 0.9 W Frequency band of the WiFi module 2.4000 GHz – 2.
Conformity declaration Miele hereby declares that this coffee machine complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk - For service, information, operating instructions etc: go to www.miele.co.uk/domestic/ customer-information-385.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.miele.com.au China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing' an District 200040 Shanghai, PRC Tel: +86 21 6157 3500 Fax: +86 21 6157 3511 E-mail: info@miele.
CVA 7440 en-GB M.-Nr.
