Operating instructions/Installation instructions

Cleaning and care
57
 Fit the dispensing unit back together.
Press down firmly so that the spouts
become securely connected to the
holder.
 Insert the dispensing unit into the
coffee machine and connect the milk
pipe.
 Refit the stainless steel cover.
 Close the machine door.
Fit cover to central spout will appear in the
display.
 Confirm the message withOK.
Cleaning the cup rim sensor
The cup rim sensor is located under the
central spout.
Clean the cup rim sensor at least once
a week and more often if heavily soiled.
 Press the two retainers together (see
arrows).
The cup rim sensor is released.
 The cup rim sensor can be cleaned in
the dishwasher, or by hand using
warm water and a little washing-up
liquid.
 To refit the cup rim sensor, press it
into the holder on the central spout
from below.
Cleaning the milk flask with lid
The milk flask should be taken apart
and cleaned every day after use.
Both the lid and the glass flask can be
cleaned in the dishwasher, or by hand
using warm water and a little washing-
up liquid.
 Remove and empty the milk flask.