Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance Mode
- Water hardness
- MotionReact
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom program (Demo mode)
- Factory default settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Settings
56
Performance Mode
You can select the appropriate
Performance Mode for how you use
your machine. Eco Mode is set by
default.
Eco Mode
Eco Mode is an energy-saving mode.
The system does not heat up until
someone starts making a drink.
Barista Mode
This Performance Mode has been
optimized for unadulterated coffee
enjoyment. Users can enjoy coffee-
based drinks without any delay as the
coffee machine remains heated to the
brewing temperature. This mode
consumes more energy than Eco Mode.
Latte Mode
This Performance Mode has been
optimized for preparing milk. Milk-
based drinks can be prepared within a
much shorter space of time. This mode
consumes more energy than Eco Mode
and Barista Mode.
Party Mode
This Performance Mode has been
configured for the occasional intensive
use of the coffee machine, e.g., for
family get-togethers.
Before switching off the coffee
machine, empty the drip tray and fill
the water container so that any
pending maintenance programs are
able to run.
Clean the coffee machine thoroughly
after intensive use, particularly the
milk pipework. It may be necessary
to descale the coffee machine
manually and degrease the brew
unit.
Please note the following information
about Party Mode:
- The general pipework is rinsed much
less frequently or not at all. The milk
pipework is not rinsed until
around1hour after milk was last
dispensed.
- Cleaning status messages or
cleaning prompts are suppressed
and delayed until the machine is next
switched on.
- The Off at and Off after timers are
deactivated. The coffee machine
switches off 6hours after the last
sensor button was pressed.
- The cup light remains permanently
switched on at the maximum
brightness level for as long as the
coffee machine stays switched on.
Water hardness
Program the coffee machine to the
water hardness level of your area so
that it functions correctly and does not
get damaged.
Your local water authority will be able to
tell you the hardness of the water in
your area.