Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance Mode
- Water hardness
- MotionReact
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom program (Demo mode)
- Factory default settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Expert Mode
43
In Expert mode, you can allocate a
bean type temporarily and change the
portion size while the drink is being
made. The setting will not be saved and
will only apply to the current drink.
Activating and deactivating
Expert mode
Expert mode is located in the pull-down
menu at the top edge of the screen.
Tap the top edge of the screen in the
middle and drag down with your
finger to open Expert Mode.
The schematic representation of the
bean containers is displayed.
TapExpert Mode.
Expert mode is active when Expert Mode
is highlighted in orange.
To exit the pull-down menu, drag the
menu window back up to the top or
tap an area of the screen outside of
the pull-down menu.
Expert mode: Allocating bean
containers temporarily
Tap the top edge of the screen and
open the Expert Mode pull-down
menu.
Now select the bean container
containing the beans you want to use
for the current drink.
To close the menu window, drag it
back up to the top.
If necessary, switch to the drinks
menu.
Now start making the drink.
Expert mode: Changing the
portion size
The drinks menu is displayed.
If you select DoubleShot or
2portions, Expert mode cannot be
used to change the portion size.
Select a drink.
Dispensing will start. You can adjust the
portion size while it is being dispensed,
e.g., individually change the amount of
hot milk, milk froth, and espresso for a
latte macchiato.
Dispensing
Tap the bar and adjust the indicator
(small triangle) as you wish.