Short user manual

 fold here  fold here  fold here  fold here  fold here  fold here
CLEANING AND CARE COFFEE THE WAY YOU LIKE IT SETTINGS
Cleaning and care Coffee the way you like it Settings
Cleaning the main dispenser
Clean the main dispenser stainless steel
cover by hand only.
 Open the appliance door.
 Remove the main dispenser stainless
steel cover and clean it.
 Detach the milk pipework from the dis-
pensing unit. Pull the dispensing unit
down to remove it.
 Disassemble the dispensing unit into
3parts.
 Clean all parts thoroughly. Clean the sur-
faces of the main dispenser with a damp
cloth.
 Reassemble the dispensing unit.
 Push the dispensing unit back into the
main dispenser and replace the stainless
steel cover.
 Confirm the message withOK.
Removing the brew unit and
cleaning it by hand
Only clean the brew unit by hand with
warm water. Do not use any cleaning
agents.
 Open the appliance door and remove the
water container.
 Press the button under the handle of the
brew unit and, while doing so, turn the
handle forward.
 Pull the brew unit to the side first and
then pull out to the front. Tilt the brew
unit forward.
Once you have removed the brew unit, do
not change the position of the handle on
the brew unit.
 Clean the brew unit by hand under
warm running water.
 Wipe any remaining coffee off the filters
(see arrows).
 Dry the funnel in the brew unit.
 Carefully clean the inside of the coffee
machine.
 Push the brew unit back into the coffee
machine.
 Lock the brew unit: Press and hold the
button under the brew unit handle and,
while doing so, turn the handle to the
right.
 Close the appliance door.
 Follow the additional instructions given in
the display.
The process is complete when rinsing has
finished.
Descaling the appliance
You will need 2descaling tablets for the
descaling program.
Descale appliance will appear in the display.
 TapOK.
The maintenance program will then start.
 Follow the instructions in the display.
 Fill the water container to the descaling
symbol with lukewarm water.
 Drop 2descaling tablets in the water.
 Reinsert the water container.
 Follow the additional instructions given in
the display.
When Rinse the water container, refill to the
 symbol and insert. Close the door appears
in the display, proceed as follows.
 Remove the water container and rinse it
thoroughly with clean water. Fill the water
container to the descaling symbol with
fresh drinking water.
The descaling process is complete when
rinsing has finished.
Bean system
You can change the names for the types of
coffee bean and/or reallocate the types of
bean under Settings | Type of beans.
If you do not allocate a type of bean, you
will be asked what type of bean you want to
use for the coffee as you make it.
Renaming bean types
The 3bean containers are shown in the dis-
play as follows and are pre-named.
Type of beans
Type A Type B
Type C
If you are using the same type of beans in
two of or all the bean containers at the
same time (for instance, because you only
use one bean type), make sure you name
them in the exact same way.
 Select Change name.
 Enter the name you want and then
tapSave.
Allocating the bean types
If you have set up at least oneprofile and at
least onecoffee drink, first select the profile.
 Select Change allocation.
Tip: If you tap All drinks, you will highlight all
coffee drinks and you can deselect the
ones you do not want.
Drink parameters
You can set the amount of coffee, the
brewing temperature, and pre-brewing for
each drink individually.
 Touch the drink entry and keep your fin-
ger on it until the context menu opens.
 Select Parameters.
 Select Amount of coffee, Brew tempera-
ture, Pre-brewing or Type of beans.
 Select the setting you want and tapOK.
 TapOK again to save your changed set-
tings.
Portion size
You can adjust the portion size for all coffee
drinks, hot water, all types of tea, and
drinks with milk.
 Place a cup under the main dispenser.
 Touch the drink entry and keep your fin-
ger on it until the context menu opens.
 TapPortion size.
The drink will be made and Save will appear
in the display, as soon as the minimum dis-
pensing amount is reached.
 When the container is filled to the desired
level, tapSave.
If you want to change the portion size for
coffee drinks made with milk or hot water,
the ingredients which make up the drink will
be saved one after the other while the drink
is being made.
Performance mode
You can select the appropriate mode to suit
your personal preferences under Settings |
Performance Mode. The energy consump-
tion varies depending on the selected
mode.
- Eco Mode: This is an energy-saving
mode.
- Barista Mode: This mode is optimized
for espresso and coffee drinks.
- Latte Mode: In this mode, milk-based
drinks can be prepared within a much
shorter space of time.
In addition, you can activate Party Mode
for the occasional intensive use of the cof-
fee machine, e.g., for family get-togethers
(see the operating instructions).
Profiles
In addition to the Miele drinks menu (Miele
profile), you can create individual profiles to
cater for different tastes and preferences.
Creating a profile
 Select Profiles and then Create profile.
The editor will open in the display.
 Enter the name you want and then
tapSave.
The profile is created. You can now prepare
drinks.
Editing profiles
Once you have created a profile, you can
rename, delete, or move profiles via the
context menu.
Setting when the profile should change
You can choose between the following op-
tions:
- Manual: The selected profile will remain
active until you select another one.
- After each use: The machine will revert
to the Miele profile whenever a drink is
dispensed.
Creating and processing drinks
in a profile
You can create new drinks based on exist-
ing drinks. A maximum of nine drinks can
be saved under one profile.
 Start by accessing the profile you want
as follows: TapProfiles and select the
profile.
 Tap Create drink and select a drink.
 Change the portion size or drink parame-
ters.
Preparation will begin and you can save the
portions for each component as you wish.
 Enter a name for the new drink and
tapSave.
Once you have created some drinks, you
can edit these entries in the context
menu.
You can personalize your coffee machine by
adapting the factory default settings to suit
your requirements.
Factory default settings are marked in ital-
ics.
Language 
- deutsch |...and other languages
- Location
Time
- Display: On | Off | Night dimming
- Clock type: Analog |Digital
- Clock format: 24 h | 12 h (am/pm)
- Set
Tip: If you touch the time of day on the top
right of the display, you can set the time di-
rectly.
Date
The date appears if the Time | Clock type |
Digital setting is selected.
Start screen
- Main menu | Drinks | Profiles | MyMiele
You can select the menu that is displayed
when the coffee machine is switched on.
Timer
- Appliance timer: On at | Off at | Off after
(00:20)
- TeaTimer: Automatic | Manual
- Maintenance timer
Volume
- Buzzer Tones
- Keypad Tone
- Welcome Melody: On | Off
Display
- Brightness
- Color scheme: Bright | Dark
- QuickTouch: On | Off
Lighting
Coffee machine switched on: You can use
the sensor control to switch the light-
ing on or off at any time.
Coffee machine switched off: You can still
switch the lighting on or off whenever you
like, but you will need to select the follow-
ing settings first:
- Time | Display | On, or Night dimming
(time of day is displayed)
- Display | QuickTouch | On
Info
- Number of drinks (Total drinks | Total
coffee drinks |...)
- No. of uses until maintenance: Descale
Appliance | Degrease the brew unit
- Fill levels (of cartridges)
Fresh water (CVA7x45)
- On | Off
Altitude
0–250m, 251–500m, ...
Performance mode
- Eco Mode | Barista Mode | Latte Mode
| Party Mode
Party mode is a Performance mode for
the occasional intensive use of the coffee
machine (see the operating instructions).
Water hardness
Set to 22 gpg (21°dH) at the factory.
Automatic cleaning
- On | Off
Bean types
- Types A, B, and C: Change name |
Change allocation
Motion sensor
- Switch the light on: Appliance turned
on (On | Off) | Appliance turned off (On |
Off)
- Switch the appliance on: On | Off
- Acknowledge buzzer: On | Off
System lock
- On | Off
When the system lock is activated, the On
at timer and MotionReact cannot be se-
lected.
Miele@home
- Set up | Deactivate / Activate | Connec-
tion status | Set up again
- Remote Control (On | Off)
- SuperVision: SuperVision display (On |
Off), Display in standby (On | Off), Appli-
ance list
- RemoteUpdate (On | Off)
Some menu options only appear if
Miele@home has been set up and the cof-
fee machine is connected to a WiFi net-
work.
Software version
For Customer Service
Legal information
- Open Source Licenses
Showroom program
- Demo Mode: On | Off
Factory defaults
- Appliance settings
Language, Time, Date, Number of drinks,
Miele@home settings, Profiles, and the
corresponding drinks cannot be reset.
The Maintenance timer is reset to
2:00am.
- MyMiele
Quick Start Guide
Coffee machine
This Quick Start Guide is a substitute for the operating instructions supplied with the appli-
ance. It is essential to familiarize yourself with the coffee machine before using it for the
first time. Please read the operating instructions carefully and pay particular attention to
the IMPORTANT SAFETY INSTRUCTIONS.
en–US, CA
M.-Nr. 11 388 820 / 00
 fold here  fold here  fold here  fold here  fold here  fold here