Operating and Installation Instructions Built-in Coffee System To prevent accidents and machine damage, you must read these instructions before installation or use. en-US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 6 Preparing your appliance for an extended vacation....................................... 14 Guide to the appliance ..................................................................................... 17 Operation............................................................................................................ Touch display ..........................................................................
Contents Parameters......................................................................................................... Displaying and changing parameters .................................................................. Amount of coffee................................................................................................. Brewing temperature ........................................................................................... Pre-brewing ground coffee..................................
Contents Water hardness ................................................................................................... MotionReact ........................................................................................................ System lock .................................................................................................... Miele@home ........................................................................................................ Remote control..........................
Contents Canceling automatic cleaning and descaling...................................................... 89 Frequently Asked Questions ............................................................................ Messages in the display...................................................................................... Unusual performance of the coffee system ........................................................ Faults with automatic cleaning and/or descaling ...........................................
IMPORTANT SAFETY INSTRUCTIONS This coffee machine complies with all the stipulated safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on safety, installation, use, and maintenance. This prevents both personal injury and damage to the coffee machine.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This coffee machine is intended for household use. Do not use the coffee machine outdoors. This coffee machine must not be used at altitudes above 6560 ft (2000 m). The machine is intended only for household use and for the preparation of drinks such as espresso, cappuccino, latte macchiato, tea, etc. All other types of use are not permitted.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Danger of burning and scalding at the dispensers. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensers. Keep the coffee system out of reach of children. Children must be kept away from the coffee machine unless they are constantly supervised. Children should be supervised when they are near the coffee system.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation work or repairs should only be carried out by a Miele authorized technician. Unauthorized or incorrect installation work or repairs can pose considerable danger to users. A damaged coffee system could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine.
IMPORTANT SAFETY INSTRUCTIONS Ensure that the power cord will not be pinched or damaged by any sharp edges. To reduce the risk of injury, do not drape cord over the counter top or table top where it can be pulled on by children or tripped over unintentionally. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
IMPORTANT SAFETY INSTRUCTIONS For repairs, the coffee system must be disconnected from the electrical power supply. The coffee system is only disconnected from the power supply if - the circuit breaker has been tripped, or - the fuse is removed, or - the power cord is disconnected from the power supply. Pull the plug, not the cord, to disconnect the appliance from the power supply.
IMPORTANT SAFETY INSTRUCTIONS Correct use Danger of burning and scalding at the dispensers. The liquids and steam dispensed are very hot. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the nozzles. Ensure that the main dispenser is clean and installed correctly. Before opening the door, remove any containers from the drip tray in the machine door.
IMPORTANT SAFETY INSTRUCTIONS Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins. Do not use oily beans or beans that have been treated with caramel, sugar, or other substances. Sugar and oil will damage the coffee system.
IMPORTANT SAFETY INSTRUCTIONS Preparing your appliance for an extended vacation If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak. To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc. Accessories and parts Only use genuine Miele accessories.
IMPORTANT SAFETY INSTRUCTIONS If you do not make use of the automatic descaling and cleaning functions, you must regularly run the maintenance programs for cleaning the milk pipework and the brew unit, and for carrying out descaling. Miele cannot be held liable for damage that results from not cleaning and/or descaling the machine properly, or from using the wrong cleaning/descaling agent, or an unsuitable solution concentration. Do not use a steam cleaner to clean this machine.
IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape, or other types of adhesive on the stainless steel surfaces. These will damage the stainless steel surfaces, causing them to lose their dirtrepellent protective coating. The finish on stainless steel surfaces is susceptible to scratching. Even magnets can cause scratching.
Guide to the appliance Front view 1 2 3 4 5 Remote 6 Back 7 Light 8 11 9 10 a On/Off button b Optical interface (for Miele Technical Service only) c Remote sensor button (MobileStart) d Movement sensor e Back sensor button f Touch display g Light sensor button h Door handle i Height-adjustable main dispenser with lighting j Drip-tray cover k Milk container 17
Guide to the appliance Interior view a Bean containers (Type A and Type C) b Milk valve c Height-adjustable main dispenser with lighting d Grinder setting e Bean container (Type B) f Fan outlet g Water container h Drip tray with lid i Brew unit j Grounds container k Maintenance container l Holders for cleaning and descaling cartridges (including adapters) m Drip tray 18
Operation Touch display The delicate touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers. The touch display is split into multiple areas. Miele 12:00 Ristretto Espresso Coffee Long Coffee Profiles The menu path appears on the left of the header. If you tap a menu name in the header, the display will switch to that menu. To switch to the start screen, tap . The time of day is shown on the right of the header.
Operation Operating actions All the selectable options are displayed in black or white according to your selected color scheme. Each time you tap a possible option, the relevant characters (word and/or symbol) light up orange. Selecting a menu option Tap the field or value you want in the display. Scrolling You can scroll left or right. Swipe across the screen. To do this, place your finger on the touch display and swipe it in the direction you want.
Operation OK Select the value you want: As soon as you enter a valid value, OK turns green. Use the arrow to delete the last entered number. Confirm with OK. Entering a name Letters are entered using a keyboard. It is best to select short names. Tap the letters or characters you want. Tip: Use the arrow to delete the last entered character. Tap Save. Displaying the context menu When you are in certain menus, a context menu can be displayed, e.g., for configuring drinks.
Operation Help Context-sensitive help is available for certain functions. In this case, Help appears in the bottom line. Tap Help to display information in text and pictures. Tap Close to return to the previous menu. Pull-down menu Among other things, the pull-down menu provides access to a schematic representation of the bean containers and to Expert Mode. Tap the orange line at the top edge of the screen and drag down with your finger. Active settings are highlighted in orange.
Operation Symbols in the display The display shows symbols as well as text, e.g., symbols for the various drinks. Some of these are explained below. Symbol Explanation This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information. This symbol indicates the Settings menu and the Language menu option. This symbol appears if the system lock is activated. Operation is locked.
Miele@home Your coffee machine is equipped with an integrated WiFi module. To use this feature, you will need: - a WiFi network - the Miele app - a Miele user account You can create a user account via the Miele app. The Miele app will guide you through the process of connecting your coffee machine to your home WiFi network.
Before first use Before using for the first time Connect the coffee machine to the electricity supply. Install the coffee machine. Remove any notices from the machine. Remove the protective film from the drip-tray cover. Clean the water container, the bean containers, and the central spout. Have the following to hand (included with delivery) when setting the machine up for the first time: Tip: You can also choose to set up Miele@home for your coffee machine at a later point.
Before first use Setting up automatic cleaning and descaling Information about automatic cleaning and descaling will appear in the display. Confirm with OK. Tip: Tap Help to display an illustrated guide. Inserting the cleaning cartridge You will now be prompted to insert the cleaning cartridge. Pull the cleaning cartridge holder forward to remove it. Once the cleaning cartridge has been removed from its packaging, unscrew the screw cap. The cap is no longer required. Open the coffee machine door.
Before first use You can also adjust the start time for automatic cleaning and descaling at a later point. Selecting the Performance Mode You can select the appropriate mode to suit your personal preferences (see “Settings – Performance Mode”). - Eco Mode: This is an energy-saving mode. Pull the descaling cartridge holder forward. Insert the descaling cartridge and push it upward as far as it will go. - Barista Mode: This mode has been optimized for unadulterated coffee enjoyment.
Before first use - If you are using the same type of beans in 2 or 3 bean containers at the same time (for instance, because you only use one bean type), make sure you name them in the exact same way. Name type of beans for bean container? appears in the display and Type A is highlighted in orange. Tap Yes. Pull the bean containers out and take off the lids. Fill the bean containers with roasted coffee beans. Put the lids back on the bean containers to seal them.
Before first use Tip: Tap All drinks to select all the drinks. You can then deselect the ones you do not want. If you do not allocate the bean containers to the drinks, you will be asked what type of bean you want to use for the coffee as you make it. To ensure that any coffee residues from the factory testing process are removed from the brewing system, please throw away the first 2 cups of coffee when using the coffee machine for the first time.
The bean system Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each cup. Your coffee machine has a bean system with 3 bean containers which can be filled with different types of beans or even just one type. You can allocate bean types to individual coffee drinks as you wish. Alternatively, you can create profiles with your own coffee drinks and allocate other bean types to these drinks which are different to the standard Miele profiles.
The bean system If you switch from having identical names to having different names, you will then need to allocate coffee drinks to the newly named type of bean. Changing how the bean containers are allocated If you have created extra user profiles for coffee drinks in addition to the Miele standard profile, the bean types can be individually allocated to the drinks in each profile. Tap Change allocation. If you have set up 1 or more profiles and at least 1 coffee drink, first select the profile.
Filling the water tank Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day. Risk of damage due to incorrect operation. Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine. Carbonated water leaves too much limescale in the coffee machine. Only use cold, fresh tap water to fill the water container.
Switching on and off Switching the coffee machine on Turning off for longer periods of time Tap the On/Off button . If the coffee machine is not going to be used for a while, e.g., if you are going on vacation, remember to do the following: The coffee machine heats up and rinses the pipework. Hot water will run out of the main dispenser. You can now make drinks. If the coffee machine is already at operating temperature, rinsing will not take place when the appliance is switched on.
Dispenser adjustment The main dispenser cannot be manually adjusted. Before making the drink, the main dispenser moves down and the cup sensor stops it at the optimum height for the cups or glasses being used. When the coffee machine is switched off, the main dispenser will be in the middle position. When a maintenance program is being carried out, the main dispenser will move to the height of the maintenance container or into a low maintenance position.
Preparing beverages Danger of burning and scalding at the dispensers. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. Making coffee with and without milk The following drinks can be made: - Ristretto is a concentrated, stronger espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water.
Preparing beverages Milk preparation Milk or milk alternatives (e.g., soy milk) containing added sugar can clog up the milk pipe and the rest of the milk pipework. Residues from unsuitable liquids can interfere with milk preparation. The milk used must not contain any additives. Only use pasteurized cow's milk. Tip: Using cold cow's milk (< 50°F/10°C) with a protein content of at least 3% will produce the perfect milk froth. You can select milk with a fat content according to your personal preference.
Preparing beverages Making a coffee drink Push the milk flask back into the coffee machine until it clicks into place. Tip: It is easier to remove the milk flask with both hands. Place a container under the main dispenser. Select a coffee drink. Preparation will begin and the coffee will be dispensed into the container from the main dispenser. Canceling a drink Press Stop or Cancel.
Preparing beverages DoubleShot Select the DoubleShot function if you would like a particularly strong and aromatic coffee. In this case, more coffee beans will be ground and brewed halfway through brewing. The shorter extraction time means that fewer unwanted aromas and bitter compounds will be released. DoubleShot can be activated for all drinks apart from “Ristretto” and “Long black”. Making a DoubleShot of coffee The symbol will appear while drinks are being made.
Preparing beverages Coffee Pot You can make several cups of coffee one after the other automatically with the Coffee Pot function (maximum of 1 liter). The drinks menu is displayed. Tip: Make sure that the bean and water containers have enough beans and water inside them before starting the Coffee Pot function. Place a sufficiently large container under the main dispenser. Select Coffee Pot. Tip: You will find Coffee Pot at the end of the drinks menu. Select the number of cups you want (3 to 8).
Preparing beverages - Chai Latte has its origins in traditional Ayurveda medicine as a black tea with typically Indian spices and milk. The milk mellows the spices and tops off the flavor experience. Dispensed temperature: approx. 210°F (97°C), brewing time: approx. 3 minutes - Herbal Tea is an aromatic infusion drink made up of dried leaves or fresh parts of plants. Dispensed temperature: approx. 210°F (97°C), brewing time: approx.
Preparing beverages The drinks menu is displayed. Tea pot Tap the Back sensor button. Select the setting you want. The Tea pot function allows you to make a large quantity of tea (maximum of 1 liter). The type of tea selected determines the preset temperature. Making tea The drinks menu is displayed. The drinks menu is displayed. Tip: Make sure that the water container has enough water inside it before you start making a pot of tea. Select Settings | Timer | TeaTimer.
Expert Mode In Expert mode, you can allocate a bean type temporarily and change the portion size while the drink is being made. The setting will not be saved and will only apply to the current drink. Activating and deactivating Expert mode Expert mode is located in the pull-down menu at the top edge of the screen. Tap the top edge of the screen in the middle and drag down with your finger to open Expert Mode. The schematic representation of the bean containers is displayed. Tap Expert Mode.
Grinder setting The grinder setting determines the contact time between the ground coffee and the water, known as the extraction time. When the ideal grinder setting is selected, the machine dispenses a perfect cup of coffee with a fine, hazelnut-brown crema. The grinder setting you select will be used for all coffee drinks. There are various ways to tell whether the coffee grinder is set correctly. The grinder setting is too coarse if the coffee or espresso is watery and tastes acidic.
Parameters Displaying and changing parameters You can individually adjust the following parameters for each drink: - Bean type - Amount of coffee - Brewing temperature - Pre-brewing You can adjust the brewing temperature for making tea and dispensing warm and hot water. The drinks menu is displayed. Tap the name of the drink you want and keep your finger on it until the associated context menu appears. Select Parameters. The Parameters menu is displayed. Select the parameter you want.
Parameters Type of beans You can display which type of bean is currently being used for this coffee drink or change which bean container is allocated to it.
Portion size You can adjust the amount of water for all coffee drinks, hot water, and types of tea. The strength of the coffee is determined by the ratio between the amount of ground coffee and water. If the coffee is brewed with more water but with the same amount of ground coffee, the coffee will taste milder and thinner. If you reduce the amount of water, you will get a stronger and more powerful coffee.
Resetting drinks You can reset portion sizes and parameters to their factory default settings for individual drinks or for all drinks. The drinks menu is displayed. Tap the drink you want and keep your finger on it until the context menu opens. Select Reset and confirm with Yes. The portion size and parameters are reset to their factory default settings. The allocated bean type remains stored.
Profiles In addition to the Miele drinks menu (Miele profile), you can create individual profiles to cater for different tastes and preferences. Within the profile, you can adjust the portion sizes and parameters individually for all drinks. The name of the current profile is shown in the top left of the display. Creating a profile The drinks menu is displayed. Tap Profiles. The Profiles menu opens. Tap Create profile. The editor will open in the display. Enter the name you want and then tap Save.
Profiles: Creating and processing drinks You can save frequently made drinks in a profile with your own individual settings (see “Profiles”). You can also change the names of your drinks and delete any unwanted drinks from your profile. You can save a maximum of 9 drinks in a profile. Creating a drink Renaming, moving, or deleting an entry Once you have created some drinks, you can edit these entries in the context menu. The desired profile with the newly created drinks will appear in the display.
MyMiele You can display frequently made drinks, drinks from profiles, and preferred maintenance programs on the MyMiele screen. Tip: You can also set menu options that you have entered in MyMiele as your start screen (see “Settings – Start screen”). The main menu is displayed. Tap MyMiele. You can now configure MyMiele. MyMiele: Adding an entry Tap Add entry. You can now add entries from the following menus: - Drinks - Profiles - Maintenance Select an entry. Confirm the message with OK.
MobileStart Remote With MobileStart Remote you can, for example, start making a drink via the Miele app. You will only be able to use MobileStart if Miele@home has been set up for your coffee machine. Danger of burning and scalding at the dispensers. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the main dispenser or touch hot components.
Settings You can personalize your coffee machine by adapting the factory default settings to suit your requirements. - Night dimming: To save energy, the time is displayed from 5:00 am to 11:00 pm only. Displaying and changing settings Clock type Tap the Back sensor button. The time of day can be displayed in analog (clock face) or digital (hours: minutes plus date) format when the coffee machine is switched off. Select Settings. Clock format Select the option you want to change.
Settings Start screen You can choose which screen appears when the coffee machine is switched on. For instance, you can use MyMiele to display a personalized menu (see “MyMiele”). The new start screen will appear when the coffee machine is next switched on. The drinks menu is set as the start screen by default. Timer Appliance timer You can set different times for the timer at the weekend (Sat and Sun) and/or from Monday to Friday (Mon - Fri).
Settings Maintenance timer Use the Maintenance Timer to select any start time you like for the automatic maintenance programs (see “Automatic cleaning and descaling – Maintenance Timer”). TeaTimer You can use the TeaTimer to start a kitchen timer when making tea (see “Making drinks – TeaTimer”). Volume You can set the volume of the buzzer and keypad tones in the bar chart. Display Brightness The display brightness is adjusted via a bar with seven segments.
Settings Barista Mode This Performance Mode has been optimized for unadulterated coffee enjoyment. Users can enjoy coffeebased drinks without any delay as the coffee machine remains heated to the brewing temperature. This mode consumes more energy than Eco Mode. Latte Mode This Performance Mode has been optimized for preparing milk. Milkbased drinks can be prepared within a much shorter space of time. This mode consumes more energy than Eco Mode and Barista Mode.
Settings Water hardness °dH gpg Calcium content mg/l Ca 2+ Setting 56 °dH or ppm (mg Ca 2+ Water hardness gpg /l) Calcium content mg/l Ca 2+ Setting or ppm (mg Ca 2+ /l) 1 1 7 1 30 31 214 30 2 2 14 2 31 32 221 31 3 3 21 3 32 33 229 32 4 4 29 4 33 34 236 33 5 5 36 5 34 35 243 34 6 6 43 6 35 36 250 35 7 7 50 7 36 37 257 36 8 8 57 8 37–45 38–47 258–321 37–45 9 9 64 9 46–60 48–62 322–429 46–60 10 10 71 10 61–70 63–73
Settings - Acknowledge buzzer: Audible signal sounds are suppressed, e.g., in the event of the message Fill and replace the water container. - Set up: This option only appears if the coffee machine has never been connected to a WiFi network or if the network configuration has been reset. - Switch the appliance on: The start screen is displayed. - Deactivate*/Activate*: The settings for the WiFi network are retained, but the network is switched on or off. The movement sensor is deactivated by default.
Settings You can change the coffee-machine settings, for example, in the Miele app when remote control is switched on. To start making a drink via the app, MobileStart also needs to be activated. The remote-control function is switched on by default. SuperVision The SuperVision option appears when the coffee machine is connected to a WiFi network. SuperVision allows you to monitor other household appliances in the Miele@home system.
Settings Deactivate RemoteUpdate if you do not want to install the update. The update may take several minutes. Please note the following information about the RemoteUpdate function: - You will only receive a message when an update is available. - Once an update has been installed, it cannot be undone. - Do not switch the coffee machine off during the update. Otherwise, the update will be aborted and will not be installed. - Some software updates can only be carried out by Miele Customer Service.
Cleaning and care Risk to health due to inadequate cleaning. Heat and moisture inside the coffee machine can cause coffee residues to become moldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Clean by hand or in dishwasher The brew unit is not dishwasher safe. Only clean the brew unit by hand with warm water. Do not use any cleaning agents. The following components must be cleaned by hand only: Risk of damage as a result of excessively high dishwasher temperatures. Components may be ruined (e.g., may become warped) if washed in a dishwasher at temperatures higher than 130°F (55°C).
Cleaning and care Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Cleaning the drip tray and grounds container Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. If the pipework has just been rinsed, wait a while before removing the drip tray. Please be aware that water in the drip tray can also be very hot. Do not touch hot components.
Cleaning and care Clean the drip tray, lid, and grounds container in the dishwasher or wash them by hand using warm water and a little liquid dish soap. Reassembling the drip tray Dry all parts. Clean the drip-tray recess inside of the coffee machine. Cleaning contacts Attach the drip-tray lid as follows: slide the lid under the lug next to the contacts and apply pressure to the lid until the catches at the sides audibly click into place.
Cleaning and care Cleaning the drip-tray cover Remove the drip-tray cover as follows: Apply pressure to the rear edge so that the cover tips forward and you can remove it easily. Clean and dry the surface that the water container sits on. The drip tray can be cleaned in the dishwasher, or by hand using warm water and a little liquid dish soap. Push the water container all the way into the coffee machine until you feel a resistance. Close the appliance door. Dry the drip-tray cover.
Cleaning and care Pull the main dispenser’s stainlesssteel cover forward to remove it. Then clean it. Grip the dispensing unit by the sides and pull it down to remove it. Detach the milk pipework from the dispensing unit as follows: pull the tab to the left. Take the dispensing unit apart, separating it into 3 components: the Y-piece, the spouts, and the holder. Clean all parts thoroughly. Do not remove the milk pipework connecting piece.
Cleaning and care Reinstall the stainless-steel cover. Close the appliance door. Fit cover to main dispenser will appear in the display. Confirm the message with OK. Cleaning the cup-rim sensor The cup-rim sensor is located under the main dispenser. Clean the area around the main dispenser with a damp cloth. Clean the cup-rim sensor at least once a week and more often if heavily soiled.
Cleaning and care Both the lid and the glass flask can be cleaned in the dishwasher, or by hand using warm water and a little liquid dish soap. Remove and empty the milk flask. Clean the milk-flask holder on the coffee machine with a damp cloth. Cleaning the milk valve (daily) Rinse the milk pipework in the lid under running water and then place the lid in the dishwasher. The milk-valve seal can be damaged by objects with sharp edges or similar.
Cleaning and care Open the appliance door. Clean the milk valve with a damp cloth/microfiber cloth. On the top right-hand side of the cover, you will find a pin for swiveling the cover out. Close the appliance door. Removing and cleaning the milk valve (once a month) If the following issues occur during milk preparation, the milk valve may be blocked: only hot milk is dispensed instead of milk froth, the milk sprays out. Clean the milk valve more often if necessary.
Cleaning and care Press the retainers on the left and right-hand sides of the milk-valve holder and pull the holder forward to remove it. Pull the stainless-steel bolt upward and out. Clean the individual components of the milk valve in the dishwasher. Tip: If there are any dry milk residues on the front, soak the stainless-steel bolt in warm water and a little liquid dish soap. Installing the milk valve Insert the stainless-steel bolt from above.
Cleaning and care Connect together the angular molded hose and longer milk pipework. Start by attaching the top of the molded hose to the main dispenser. The black connecting piece should be pointing to the rear. Tip: If necessary, screw the milk pipework backward at the connecting piece on the right-hand side. Then, connect the bottom end of the molded hose to the dispensing unit. Insert the milk pipework into the milk valve on the left and right-hand sides.
Cleaning and care Cleaning the bean containers Risk of damage from incorrect use and cleaning. Immersing the bean containers in liquids can result in malfunctions. If they are taken apart, bits may break off or the mechanism may no longer work properly once they are reassembled. Do not disassemble the bean containers. Do not immerse the bean containers in liquids, e.g., soapy water. Coffee beans contain oils which can deposit on the walls of the bean containers and hinder the flow of the beans.
Cleaning and care Removing the brew unit and cleaning it by hand The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit. Only clean the brew unit by hand with warm water. Do not use any cleaning agents. Remove and clean the brew unit once a week. Also clean the area below the brew unit once a week. Open the appliance door. Remove the water container. Pull the brew unit to the side first and then pull out to the front . Tilt the brew unit forward .
Cleaning and care Replacing the brew unit Proceed in the reverse order: push the brew unit back into the coffee machine. Tilt the brew unit forward a little when doing this. Wipe any remaining coffee off the two filters. One filter is located in the funnel. The other filter can be found to the left of the funnel. Dry the funnel to prevent ground coffee sticking to it the next time a coffee is made. Clean the interior of the machine Use your vacuum cleaner to remove dry coffee grounds.
Cleaning and care Clean the interior and the inside of Cleaning the interior, inside of the machine door by hand with a the machine door, and drip tray Clean the interior and front of the machine as part of the normal cleaning process. For instance, if you remove the water container, use this as an opportunity to clean the area under the water container at the same time. clean and slightly damp cloth/ microfiber cloth. After cleaning, wipe the interior and machine door dry using a soft cloth.
Cleaning and care Maintenance programs Rinsing the milk pipework The coffee machine has the following maintenance programs: If you have made a drink with milk, the coffee machine will rinse the milk pipework automatically after a few minutes. You can also start the Rinse the milk pipework function manually.
Cleaning and care For optimum cleaning results, it is recommended to use the Miele Cleaning Agent for milk pipework. The cleaning agent for milk pipework has been specially developed for use with Miele Coffee Machines and prevents subsequent damage. For each cleaning process, you will need 2 sticks of the cleaning agent for milk pipework. It is available to order from the Miele online shop, from Miele Customer Service, or from your Miele dealer. Clean the milk pipework will appear in the display.
Cleaning and care be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. You can run the maintenance program with the Miele Cleaning Cartridge or with cleaning tablets for degreasing the brew unit. The maintenance program lasts for approx. 10 minutes. If you have switched on automatic cleaning and inserted a ready-to-use cleaning cartridge, the Degrease the brew unit maintenance program will run using the cleaning cartridge.
Cleaning and care Pull the brew unit to the side first and then pull out to the front . Tilt the brew unit forward . If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see “Frequently asked questions”). Once you have removed the brew unit, do not change the position of the handle on the brew unit. Otherwise the brew unit cannot be reinserted.
Cleaning and care Dropping a cleaning tablet into the brew unit The cleaning process is complete when the drinks menu appears. Descaling the appliance Risk of damage from splashes from the descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages immediately when descaling. Drop a cleaning tablet into the top of the brew unit (arrow). Push the brew unit containing the cleaning tablet back into the coffee machine.
Cleaning and care Confirm the message with OK. When the number of remaining portions reaches 0, the coffee machine will lock. You can switch the coffee machine off if you do not want to carry out the descaling program at this point. You cannot make any drinks until the machine has been descaled. The descaling tablets are available to order from the Miele online shop, from Miele Customer Service, or from your Miele dealer. You will need 2 descaling tablets.
Cleaning and care residue remains in the water container. Fill the water container with tap water. The descaling process is complete when the drinks menu appears.
Automatic cleaning and descaling Risk of damage from spilled cleaning and descaling solution. Sensitive surfaces and/or natural floors can suffer damage. One way to catch the cleaning and descaling solution is to place the maintenance container under the main dispenser before switching off the machine. Clear up any spillages of cleaning and descaling solution.
Automatic cleaning and descaling - The water container is inserted and is filled with water at least up to the mark. - Carry out the instructions which appear in the display before switching off, e.g., Empty and refit the drip tray and the waste container. - The machine door is closed when the program is started. - The coffee machine is switched off. Automatic cleaning If you have made a drink containing milk, the milk pipework will be cleaned at least 4 days afterward.
Automatic cleaning and descaling The first message will appear when the cartridge is approx. 25% full. Cleaning cartridges are available to order from the Miele online shop, from Miele Technical Service, or from your Miele dealer. If no cleaning cartridge has been inserted or if the inserted cartridge is empty or has expired, the milk pipework and brew unit must be cleaned manually.
Automatic cleaning and descaling Automatic descaling Automatic descaling takes approx. 12 minutes. Screw the new cartridge into the holder upside down. Push the holder and cartridge into the coffee machine until the holder audibly clicks into place. Put the maintenance container back inside the coffee machine and close the machine door.
Automatic cleaning and descaling The descaling agent comes in the form of tablets in the descaling cartridge. The cartridge is filled with water when it is placed in the machine. The tablets gradually dissolve over time. - It should be transported with care and upright. Avoid shaking it. Shaking or turning upside down reduces the shelf life or damages the cartridge. The Miele Descaling Cartridge will last for up to 12 months of automatic descaling, depending on how often the coffee machine is used.
Automatic cleaning and descaling If you do not want to insert a descaling cartridge, seal the system with the adapter. Tip: You can seal the descaling cartridge with the cap that can be found on the cartridge. This cap can be easily detached by snapping it off. Insert the adapter in place of the cartridge. Dispose of the cartridge with your household waste. Maintenance Timer Inserting the descaling cartridge Insert the cartridge and push it upward as far as it will go.
Automatic cleaning and descaling The start time is saved. From now on, the automatic maintenance programs will commence at the desired time each day. Canceling automatic cleaning and descaling You can cancel the automatic cleaning programs during the holding time. If the automatic cleaning program is not performed five times in a row, the dispensing of drinks is blocked. You will only be able to make drinks again once the the brew unit has been degreased and/or the milk pipework has been cleaned.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Messages in the display Error messages must be confirmed with OK, otherwise the message may reappear in the display even though the problem has been remedied.
Frequently Asked Questions Problem Possible cause and solution F73 or The brew unit cannot be positioned correctly or is soiled. It is not possible to press the ground coffee. Check whether you can remove the brew unit. If you can remove the brew unit, rinse it under running water. Check the brew unit Push the coffee ejector of the brew unit into the correct position (see image). Replace the water container in the coffee machine and close the door. Do not insert the brew unit.
Frequently Asked Questions Problem Possible cause and solution F233 The cup-rim sensor is not inserted or is incorrectly inserted. If the main dispenser is moving upward and the cuprim sensor is bumped, e.g., with a cup, the cup-rim sensor loses its reference position. Confirm the message with OK. Reinstall the cup-rim sensor. Cup-rim detection remains inactive and the main dispenser stays in the top position until the coffee machine is next switched on.
Frequently Asked Questions Unusual performance of the coffee system Problem Possible cause and solution The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough. Tap and hold the On/Off button for at least 3 seconds. The plug is not properly plugged into the electrical socket. Insert the plug into the electrical socket. The fuse has tripped because the coffee machine, voltage, or another appliance is defective.
Frequently Asked Questions Problem Possible cause and solution The sensor buttons do There is an internal fault. not respond. Disconnect the coffee machine from the electricity The coffee machine can supply by removing the plug from the socket or no longer be operated. switching off the breaker. A fan can be heard even though no drinks are being prepared and the coffee machine is switched off. This is not a fault.
Frequently Asked Questions Problem Possible cause and solution Coffee dispensing is repeatedly interrupted and the message Fill the bean container appears in the display. This is not a fault. The brew unit has not detected the ground coffee. Certain types of coffee produce a small amount of coffee when they are ground. Usually the grinder is set too fine and the amount is set to minimum. Confirm the message with OK.
Frequently Asked Questions Problem Possible cause and solution The display is hard to see or not legible. The display brightness has been set too low. Change this setting (see “Settings”). The display lights up but the coffee machine does not heat up and no drinks are made. The Demo mode for demonstrating the coffee machine in stores and showrooms has been activated. Deactivate Demo mode (see “Settings”).
Frequently Asked Questions Faults with automatic cleaning and/or descaling Problem Possible cause and solution After switching on, a message appears informing you that automatic cleaning and/or descaling could not be carried out. The coffee machines was not ready for operation: all removable parts, such as the water container, drip tray, brew unit, or main dispenser must be installed. The water container was not filled with drinking water at least up to the descaling symbol .
Frequently Asked Questions Problem Possible cause and solution When the machine is switched on, one of these messages appears: Automatic cleaning Automatic cleaning could not be carried out five times. could not be carried out. Start Automatic cleaning (duration min.) now? Otherwise Automatic cleaning will be permanently turned off. or: Automatic maintenance could not be carried out. Carry out the Automatic cleaning part of the Automatic maintenance program (duration min.
Frequently Asked Questions Unsatisfactory results Problem Possible cause and solution The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its walls, the more important it is to pre-heat it. Pre-heat the cup with hot water, for example. The brewing temperature is set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit.
Frequently Asked Questions Problem Possible cause and solution The coffee tastes weak. The coffee grounds in the grounds container are sludgy and grainy. Less coffee is being brewed because insufficient coffee beans are getting into the grinder. Have you used a dark roast? This type of coffee bean is often oily. These oils can cling to the walls of the coffee bean containers and hinder the flow of beans.
Frequently Asked Questions Problem Possible cause and solution Coffee drinks trickle/ The brew unit is blocked because the coffee machine dribble slowly out of the has been used very intensively. And/or the brew unit main dispenser. has not been regularly removed and cleaned by hand. If a cleaning cartridge is inserted, start by switching off Automatic Cleaning (Settings | Automatic Cleaning).
Service and warranty Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
Accessories These products and other useful accessories can be ordered via the Miele Webstore, from Miele Service or from your Miele dealer. - Microfiber cloth for removing finger marks and light soiling - Cleaning agent for milk pipework for cleaning the milk system - Cleaning tablets for degreasing the brew unit - AutoCleaner for automatically cleaning the milk pipework and brew unit - Descaling cartridge for automatic descaling - Descaling tabs for manual descaling - CJ Jug 1.
Packaging material / Disposal of old machine Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Old electrical and electronic appliances often still contain valuable materials.
*INSTALLATION* Installation Electrical connection Before connecting the coffee machine, make sure that the connection data on the data tag (voltage and frequency) matches the domestic electrical supply. This data must match to prevent the coffee machine from being damaged. If in any doubt, consult a qualified electrician. equivalent measures in the installation. As described, for example, in the current version of VDE-AR-E 2510-2. The coffee machine must not be used with energy saving plugs.
*INSTALLATION* Installation Installation dimensions Installation in a tall cabinet A minimum installation height of 33 7/16" (850 mm) must be observed. Combination with other Miele Built-in Appliances is possible. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them. If the machine is to be combined with a suitable built-in dishware/ food-warming drawer, no shelf is required in between.
*INSTALLATION* Installation Installation and connections A Cut-out (at least 20"/508 mm wide) in the niche floor of the tall cabinet for power cord and ventilation E Electrical connection No electrical or plumbed-water connection in this area 107
*INSTALLATION* Installation Building in the coffee machine Danger of injury due to incorrect operation. A machine that has not been built in is not safe and can cause injuries. Do not operate the coffee machine unless it has been built in. Danger of damage due to incorrect operation. If the ambient temperature range is not observed, the coffee machine may not function properly. The coffee machine may only be operated within an ambient temperature range of +60°F to +100°F (+16°C to +38°C).
*INSTALLATION* Installation Connecting the electricity supply Observe the information under “Electrical connection”. Connect the coffee machine to the electricity supply. Pushing in and aligning the coffee machine Take care not to trap or damage the electrical connection when pushing the machine into the niche. Push the coffee machine all the way into the niche until you feel a resistance.
*INSTALLATION* Installation The door opening limiters can be removed, allowing you to increase the opening angle to approx. 170°. This makes it easier to remove the bean containers, for example. Removing the door opening limiters Make sure that sufficient space is available for the larger door opening angle and that the machine door is not going to hit an adjacent wall. Remove the door opening limiters from the hinges, e.g., by prizing them out with a screwdriver.
FCC Declaration of Conformity Electricity consumption in standby: < 1.0 W Electricity consumption in networked standby: < 1.4 W Frequency range 2.412 GHz – 2.462 GHz Maximum transmitting power < 100 mW WiFi module EK037 Contains FCC ID: 2ACUWEK037 Contains IC: 5669C-EK037 This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).
Copyrights and licenses Miele uses their own and third party software which is not subject to any so-called open source license for the operation and control of the device/appliance. This software/these software components are protected by copyright. The copyright powers of Miele and third parties have to be respected. Furthermore, this device/appliance contains software components which are distributed under open source license conditions.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 www.mieleusa.com Customer Support Phone: 888-99-MIELE (64353) info@mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
CVA 7840 en-US M.-Nr.