Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Cleaning the water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Packaging material / Disposal of old machine
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Cleaning and care
74
Wipe any remaining coffee off the two
filters. One filter is located in the
funnel. The other filter can be found
to the left of the funnel.
Dry the funnel to prevent ground
coffee sticking to it the next time a
coffee is made.
Clean the interior of the machine
Use your vacuum cleaner to remove
dry coffee grounds.
Clean the niche of the brew unit with
a damp, clean cloth. Clean the areas
marked in white in the illustration,
e.g., around the drive shaft,
especially well.
Replacing the brew unit
Proceed in the reverse order: push
the brew unit back into the coffee
machine. Tilt the brew unit forward a
little when doing this.
Press the button under the handle of
the brew unit and, while doing so,
turn the handle backward.
Tip: If you are unable to turn the brew
unit handle, apply firm pressure to the
sides of the brew unit.
Push the water container into the
coffee machine.
The process of removing and inserting
the brew unit causes ground coffee to
drop into the drip tray.
Remove the drip tray and clean the
lid.
Push the drip tray back into the
coffee machine and close the
machine door.