Operating instructions/Installation instructions

Settings
53
TeaTimer
You can use the TeaTimer to start a
minute minder when making tea (see
“Making drinks – TeaTimer”).
Volume
You can set the volume of the buzzer
and keypad tones using the bar chart.
Display
Brightness
The display brightness is adjusted via a
bar with seven segments.
Colour scheme
Choose between a light or dark colour
scheme for the display.
QuickTouch
Use this setting to define whether
the sensor and movement sensor
should respond when the coffee
machine is off and the time is being
shown in the display (Time| Display| On
or Night dimming).
Lighting
Use the segment bar to set the lighting
intensity.
You can use the sensor to switch
the lighting on or off at any time,
provided that the coffee machine is
switched on.
If the coffee machine is switched off,
you can still switch the lighting on or
off whenever you like but you will need
to select the following settings first:
- Time| Display| On or Night dimming
(time of day is displayed)
- Display | QuickTouch | On
Info (display information)
In the Info menu option, you can display
the number of drinks dispensed and the
fill levels of the cartridges (provided that
they have been fitted).
Altitude
If the coffee machine is installed at high
altitudes, the lower air pressure will
cause the water to boil at a lower
temperature. You can set the local
altitude of the machine to ensure that
the correct temperatures are achieved.
Performance mode
You can select the appropriate
performance mode for how you use
your machine. Eco mode is set by
default.
Eco mode
Eco mode is an energy-saving mode.
The system does not heat up until
someone starts making a drink.