Operating instructions/Installation instructions

Cleaning and care
77
For optimal cleaning results, we
recommend Miele cleaning agent for
milk pipework.
The cleaning agent for milk pipework
has been specially developed for use
with Miele coffee machines and
prevents subsequent damage.
For each cleaning process, you will
need 2sticks of the cleaning agent for
milk pipework.
It is available to order via the Miele
webshop or directly from Miele (see the
end of this booklet for contact details).
Clean the milk pipework appears in the
display.
The cleaning process cannot be
cancelled. It must be completed
through to the end.
 Confirm the message withOK.
 Follow the instructions in the display.
When Fill water container with lukewarm
water and cleaning agent up to the 
symbol and replace it. Close the door
appears in the display, proceed as
follows.
Preparing the cleaning solution
 Open 2sticks of the cleaning agent
for milk pipework and empty the
contents into the water container.
 Fill the water container to the
mark with lukewarm water and stir
the solution.
Follow the instructions for the mixing
ratio carefully. It is important that you
do not fill the water container with
too little water. Otherwise, cleaning
will be incomplete.
 Replace the water container in the
coffee machine and close the
machine door.
 Follow the instructions in the display.
 If prompted to do so in the display,
rinse the water container thoroughly
with clean water. Make sure that no
cleaning agent is left in the water
container. Fill the water container with
fresh tap water.
The cleaning process is finished when
Process finished appears in the display.
Degreasing the brew unit and
cleaning the interior
Depending on the natural oil content of
the coffee used, the brew unit can
become blocked quite quickly. It must