Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance Mode
- Water hardness
- MotionReact
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom program (Demo mode)
- Factory default settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Packaging material / Disposal of old machine
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Cleaning and care
81
Pull the brew unit to the side first
and then pull out to the front. Tilt
the brew unit forward.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
“Frequently asked questions”).
Once you have removed the brew
unit, do not change the position of
the handle on the brew unit.
Otherwise the brew unit cannot be
reinserted.
Clean the brew unit by hand under
warm running water without using
cleaning agent or liquid dish soap.
Wipe any remaining coffee off the two
filters. One filter is located in the
funnel and the other to the left of the
funnel.
The process of removing the brew unit
causes ground coffee to drop into the
drip tray.
Remove the drip tray and clean the
lid.
Clean the interior of the coffee
machine (see also “Cleaning and care
– Removing the brew unit and
cleaning it by hand”). Use your
vacuum cleaner to remove dry coffee
grounds.