Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance Mode
- Water hardness
- MotionReact
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom program (Demo mode)
- Factory default settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Packaging material / Disposal of old machine
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Frequently Asked Questions
Problem Possible cause and solution
F73 or
Check the brew unit
The brew unit cannot be positioned correctly or is
soiled. It is not possible to press the ground coffee.
Check whether you can remove the brew unit.
If you can remove the brew unit, rinse it under
running water.
Push the coffee ejector of the brew unit into the
correct position (see image).
Replace the water container in the coffee machine
and close the door. Do not insert the brew unit.
Switch the coffee machine on.
This will initialize the brew unit motor and put it back
into the start position.
When Insert the brew unit appears in the display, put
the brew unit back in the coffee machine.
If you cannot remove the brew unit, switch the
coffee machine off. Wait for
approximately2minutes before switching the
machine back on again.
A manual maintenance
program is prematurely
aborted and the follow-
ing appears in the dis-
play: Push the water con-
tainer in until it engages.
The water container has not been filled and inserted
correctly.
Check that you have selected the correct mark.
The symbols marked on the water container indicate
the amount of water required for the
Descale Appliance: and Clean the milk pipework:
maintenance programs.
Fill the water container up to the relevant mark and
restart the process.
93