Building Instructions

Technical Information
93
C
VA
6
1
0
C
offee
Sy
stem
Displayed Message Information
STANDBY…
The appliance is in the energy saving
• Press ENTER
WATER SYSTEM FAULT
The level switch has been actuated by
water being present in the base of
the appliance
• Clear unit of water from lower pan and
locate / repair source of leak.
• Check level switch for proper operation
FILL WATER TANK
The water tank level switch is not actuated
– water tank float is below the switch level
• Refill the water tank
• Check that float and switch operate
EMPTY WATERTANK
• Check that flowmeter is plugged into
the correct position of the electronic
WARMING UP…
Appliance is warming up, as warming up
the “. . .” in the display disappear
Table 5-4: Displayed messages (continued from table 5-3)