Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
Before using for the first time
20
Display
You can choose from the following op-
tions:
– On: The time and date are always vis-
ible in the display when the appliance
is turned off.
– Off: The display is dark when the ap-
pliance is turned off.
– Night dimming: The date and time of
day is displayed from 5:00 am to
11:00 pm.
Use the arrow keys to highlight
the desired display type. Then tap
OK.
Depending on the setting selected, the
coffee system may use more energy. A
message will appear in the display to
inform you of this.
The coffee system is now successfully
set up for use.
Fill the water reservoir with cold, fresh
tap water.
Water hardness
The water hardness level indicates how
much calcium is dissolved in the water.
The higher the calcium content, the
harder the water, and the harder the
water, the more often the coffee system
will need to be descaled.
The coffee system measures the
amount of water used and steam made.
Depending on the level of water hard-
ness set, more or fewer drinks can be
dispensed before the appliance needs
to be descaled.
Program the coffee system to the water
hardness level of your area so that it
functions correctly and does not get
damaged. At the correct time a prompt
will then appear in the display to
descale the appliance.
You can program four hardness levels
on the appliance:
Water hardness Water
hardness
level in
your area
Setting
(water hard-
ness level)
0 - 8.7 gr/gal
(0 - 8.4°dH)
Soft Soft 1
8.7 - 14.6 gr/gal
(8.4 - 14°dH)
Medium Medium 2
14.6 - 21.9 gr/gal
(14 - 21°dH)
Hard Hard 3
> 21.9 gr/gal
(21°dH)
Hard Very hard 4
The appliance is programmed ex-works
to hardness level 3.