Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
Preparing beverages
31
Drinks with milk
Danger of burning and scalding
from hot steam coming out of the
main dispenser!
The liquids and steam dispensed are
very hot.
Only use plain milk. Most sugary ad-
ditives can clog the milk lines. and
damage the machine.
If using dairy milk make sure that it
has been pasteurized.
The following drinks with milk can be
made:
– Cappuccino consists of approx.
2/3 milk froth and 1/3 espresso.
– Latte macchiato consists of 1/3
each of hot milk, milk froth and
espresso.
– Caffè latte consists of hot milk
and espresso.
Hot milk and milk froth can also be
made.
Notes on the milk flask
Milk is not cooled in the milk flask.
Therefore, place the milk flask in the
refrigerator if you are not going to use
milk for a while. Good milk froth can
only be achieved when cold milk (be-
low 50°F / 10°C) is used.
a
Lid
b
Sensor rod
c
Milk intake tube
d
Glass container
Fill the milk flask up to max.
3/4" (2cm) below the rim with milk.
Seal the milk flask with the lid.
It is important to keep the opening
and neck of the milk flask clean
(while filling it and carrying it). Any
soiling can lead to a malfunction of
the container in the machine.