Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
Preparing beverages
33
Preparing user profile drinks
If you have already created a user pro-
file (see "User profiles"), you can select
it before preparing a drink.
Tap Profile.
Tap Select profile.
Use the arrow keys to highlight
the desired user profile. Then tap OK.
The name of the selected user profile is
shown in the top left of the display.
You can now make the drink you want.
After a drink has been pre-
pared
Start the rinse cycle appears in the dis-
play a few minutes after a drink with
milk has been prepared.
TapOK.
The milk pipework will now be rinsed.
Even if you do not confirm with OK,
the milk pipework will automatically be
rinsed after some time.
Tip: Remove the milk flask, rinse the
cover under running water, and close
the milk flask using the compact cap.
Cool the milk until the next time you use
it.
Milk froth can be made only using cold
milk (<50°F / 10°C).
The compact cap It is available from
Miele.