Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
Cleaning and care
58
Reassemble the dispensing unit in
the reverse order. Make sure that up-
per adapter clicks into position.
Press the dispenser nozzles firmly
onto the dispensing unit.
Replace the dispensing unit in the
main dispenser.
Put the cover back into place.
Maintenance of the milk valve
The milk valve should be cleaned once
a week to ensure good quality milk
froth.
Tap.
With the arrow key , select Mainte-
nance. Then tap OK.
Select Condition milk valve and tap OK.
The milk valve will move into the main-
tenance position.
Important! Before confirming Leave
maintenance position with OK, you
must remove the cleaning brush.
Otherwise the coffee system will be
damaged.
Insert the brush in the milk valve and
move it back and forth.
TapOK.
The milk valve will move into the correct
position and the milk pipework will be
rinsed through.