Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
Cleaning and care
61
Interior and machine front
First take out all removable parts and
then clean the interior and the ma-
chine front with a mild solution of hot
water and liquid dish soap.
Tip: Use your vacuum cleaner to re-
move dry coffee grounds.
A small drip catcher is located inside
the front of the machine at the bottom.
Remove the drip catcher and clean it
in the dishwasher or by hand using
warm water and liquid dish soap.
After cleaning, remember to place
the drip tray in the coffee system
again.
Main dispenser connector
The part which connects the brew unit
and the main dispenser is located on
the inside of the machine front.
Clean this connection regularly with a
damp cloth, taking care not to wipe
the grease off the cap.
Lubricate the cap at least once a
month with the silicone grease sup-
plied.