Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
Frequently Asked Questions
75
Problem Possible cause and solution
The coffee system does
not switch itself on, al-
though the timer setting
Turn on at has been acti-
vated.
The system lock feature has been activated.
You need to deactivate the system lock (see "Set-
tings - System lock").
A day of the week has not been selected.
Check the timer settings and change them if re-
quired (see "Settings - Timer").
The machine was not used after being switched on
automatically three times in succession.
Switch the machine on and dispense a drink.
The display is hard to
see or not legible.
The display brightness has been set too low.
Change this setting (see "Settings").
Push the water container in
until it engages appears
after activation even
though the container is
filled and fitted in the
machine.
The appliance does not
rinse.
The coffee system needs to be descaled.
Turn the coffee system off with the On / Off but-
ton. Wait approx. 1 hour.
Then switch the machine on again. As soon as
Preheating appears in the display, tap and se-
lect Descale the appliance.
Descale the coffee system. You may need to re-
peat the descaling process.
Empty the drip tray ap-
pears in the display,
even though the drip
tray is empty.
The drip tray is not positioned correctly in the ma-
chine.
Push the drip tray in as far as it will go.
The drip tray sensing mechanism is not working. The
contacts are soiled.
Clean the contacts and dry them thoroughly (see
"Cleaning and care - Drip tray").