Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
Frequently Asked Questions
76
Problem Possible cause and solution
The machine door will
not close.
The containers are not pushed all the way in.
Check the containers.
The door hinges are not correctly aligned.
Adjust the door hinges (see "Installation - Adjust-
ing the door hinges").
The door is difficult to
open and close.
The cap of the main dispenser connector is not suffi-
ciently greased. The silicone cap gets jammed in the
brew unit.
Check the silicone cap for damage. Repalce the
cap with the provided spare part if necessary.
Lubricate the cap with the included silicone
grease.
Grease the cap of the main dispenser connector reg-
ularly, at least once a month.
The coffee system does
not rinse itself when
turned on.
This is not a fault.
If the coffee system still has an operating tempera-
ture higher than 140°F (60°C), rinsing will not take
place.