Operating/Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and display
- Accessories
- Before using for the first time
- Operation
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Coffee the way you like it
- Portion size
- Profiles
- Settings
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Electrical connection
- Installation
Installation
91
The appliance comes with four M5
socket screws to help you align and se-
cure it in the building-in niche.
Open the appliance door, and par-
tially tighten the side socket screws.
Carefully turn the lower socket
screws to center the machine in the
niche.
Tighten both upper socket screws by
hand to secure the machine in the
unit. Do not over-tighten them.
Adjusting the door hinges
If the machine door becomes difficult to
open or close after installation, you can
adjust the hinges to realign it (TX 20):
Tighten the screw to align it flush
with the cabinet front.
Tighten the screw to align the door
horizontally and vertically.