Installation Instruction

Filling the water tank
27
 Change
the water every day to
prevent a build-up of bacteria.
If the coffee system is plumbed into the
water supply, the water tank will fill au‐
tomatically as soon as the machine is
switched on.
The intake device in the lid ensures that
the wat
er is taken in slowly.
If the coffee system has not been
used t
o make any drinks for a long
time, the water is left in the supply
hose.
This can impair the taste of the cof‐
fee.
Discard the first full container of wa‐
ter.
You can also fill the container manually
if you are not using the water supply
(see "Settings – Main water").
When using the coffee system with
water tank operation:
Fill the water tank only with fresh,
cold tap water.
Hot or warm water or other liquids
can
damage the coffee system.
Do not use min
eral water. Mineral
water will cause serious limescale
deposits to build up in your machine
and damage it.
 Open the app
liance door.
 P
ull the water tank forwards to re‐
move it.
 T
ake off the lid and fill the water tank
with fresh, cold tap water up to the
"max." mark.
 P
ush the water tank back in the ma‐
chine until it clicks into place.
If the water tank protrudes slightly or
is a little high, check whether the sur‐
face that the wat
er tank sits on is
dirty. If the water tank is not posi‐
tioned correctly, the outlet valve will
not connect properly and could leak.
Clean the surface, if necessary.