Operating & Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Accessories
- Operation
- Before using for the first time
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Dispenser adjustment
- Preparing beverages
- Coffee the way you like it
- Portion size
- Resetting drinks
- User profiles
- User profiles: Creating and editing your own drinks
- MyMiele
- Settings
- Accessing the "Settings" menu
- Changing and saving settings
- Setting options
- Language
- Time of day
- Date
- Timer
- Eco mode
- Lighting
- Start screen
- Info (displaying information)
- Locking the coffee system (System lock )
- Water hardness
- Display brightness
- Volume
- Activating and deactivating water connection
- Dispenser adjustment
- Factory default setting
- Showroom program (Demo mode)
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Sensor cover
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Plumbing
- Electrical connection
- Installation
- Copyright and licenses
Cleaning and care
69
Brew unit
Remove the brew unit and wash by
hand
Clean the brew unit by hand only us-
ing warm water. Do not use liquid
dish soap.The moving parts of the
brew unit are lubricated. Liquid dish
soap will damage the brew unit.
You can remove the brew unit for clean-
ing.
Clean it once a week.
Open the appliance door.
Remove the water tank, waste unit
and the coffee chute cover.
Press the button on the end of the
handle of the brew unit and while
doing so turn the handle counter-
clockwise .
Press the catch in front of the brew
unit downwards, and pull the brew
unit out carefully.
Carefully pull the brew unit out of the
coffee system.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (See
"Frequently asked questions").
When the brew unit has been pulled
out, do not alter the position of the
brew unit handle.This would displace
the brew unit and it would not fit
back into the coffee system.
Clean the brew unit by hand under
hot running water without using de-
tergent or liquid dish soap.
Wipe any remaining coffee off the two
filters. One filter is located in the fun-
nel and the other to the left of the
funnel.
Dry the funnel to prevent ground cof-
fee sticking to it the next time a cof-
fee is prepared.
Clean the inside of the coffee system.
Use your vacuum cleaner to remove
dry coffee grounds.
To put the brew unit into place again:
Proceed in reverse order: push the
brew unit into the coffee system,
making sure it is straight.