Operating & Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Accessories
- Operation
- Before using for the first time
- Filling the water tank
- Filling the coffee bean container
- Turning the machine On and Off
- Dispenser adjustment
- Preparing beverages
- Coffee the way you like it
- Portion size
- Resetting drinks
- User profiles
- User profiles: Creating and editing your own drinks
- MyMiele
- Settings
- Accessing the "Settings" menu
- Changing and saving settings
- Setting options
- Language
- Time of day
- Date
- Timer
- Eco mode
- Lighting
- Start screen
- Info (displaying information)
- Locking the coffee system (System lock )
- Water hardness
- Display brightness
- Volume
- Activating and deactivating water connection
- Dispenser adjustment
- Factory default setting
- Showroom program (Demo mode)
- Cleaning and care
- Overview
- Clean by hand or in dishwasher
- Drip tray
- Drip tray cover
- Water tank
- Waste unit
- Main dispenser
- Sensor cover
- Maintenance of the milk valve
- Milk flask with lid
- Bean container
- Interior and machine front
- Main dispenser connector
- Brew unit
- Care programs
- Rinsing the coffee system
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
- Frequently Asked Questions
- Technical Service
- Saving energy
- Packaging material / Disposal of old machine
- Plumbing
- Electrical connection
- Installation
- Copyright and licenses
Plumbing
95
Parts must only be replaced with
original Miele spare parts, available
from Miele.
Connecting the appliance to
the water supply line
Make sure that the supply line is not
kinked or damaged.
Remove the water connection cover
from the bottom of the back panel of
the machine.
Take the angled side of the brass fit-
ting and check whether a gasket is
present. If not, insert one.
Screw the supply line coupling nut
onto the threaded union.
Ensure that the supply line is cor-
rectly fitted and that it is water-tight.
Connecting to the water supply
Before establishing the fixed net-
work connection, ensure the appli-
ance is disconnected from the elec-
trical supply.
Connection to the water supply should
be carried out by a qualified plumber
and should incorporate a 1/4" water line
connected to a shut off valve.
Check that the gasket is present. Re-
place, if not, insert before connecting
to the water supply.
Screw the supplied brass compres-
sion fitting, with the 3/4" BPT end,
tightly onto the water connector of
the coffee machine. (Tighten the
compression fitting by hand, do not
use a tool.) The fitting includes an
opening for standard 1/4" piping.
Old or used hoses must not be con-
nected to this coffee system.
Connect the compression fitting to
the water supply.
Slowly open the shut-off valve to the
water supply and check for leaks. If
necessary, check whether the sealing
ring and fittings are tight.
You can now continue with the installa-
tion of the coffee system in its housing
unit (see "Installation").