Use and Care Guide / Installation Guide

Fault Possible cause and solution
"Push the water
container in until it
engages"
The water container is not sitting properly in the appliance.
^
Take the water container out, then put it back into the
appliance.
This fault message will also appear if the water container is
not correctly filled and inserted during descaling.
^
Fill it to the descaling mark F and restart the descaling
process.
The plumbed water intake is malfunctioning.
^
Check for kinks in the water intake hose and make sure
that the water supply is open all the way.
Frequently asked questions
68