Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and indicators
- Operation
- Before first use
- Filling the coffee bean container
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Cleaning the water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
Filling the water tank
27
Risk to health due to
contaminated water.
Bacteria can develop in water which
has been sitting in the water
container for too long and is a risk to
your health.
Change the water in the water
container every day.
Risk of damage due to incorrect
operation.
Unsuitable liquids such as hot or
warm water or other liquids can
damage the coffee machine.
Carbonated water leaves too much
limescale in the coffee machine.
Only use cold, fresh tap water to fill
the water container.
Open the appliance door.
Pull the water container forward to
remove it.
Fill the water container with fresh,
cold tap water up to the max. mark.
Push the water container into the
machine and close the machine door.