Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and indicators
- Operation
- Before first use
- Filling the coffee bean container
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Cleaning the water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
Cleaning and care
64
Maintenance programs
The coffee machine has the following
maintenance programs:
- Rinsing the machine
- Rinsing the milk pipework
- Cleaning the milk pipework
- Degreasing the brew unit
- Descaling the machine
Carry out the relevant maintenance
program when the prompt to do so
appears in the display. You can also
start maintenance programs at any time
so that the coffee machine does not
prompt mandatory cleaning at an
inconvenient time.
Tip: To save you having to empty the
drip tray too often, you can place the
maintenance container under the main
dispenser.
Opening the Maintenance menu
Tap the sensor button.
You can now select a maintenance
program.
Rinse appliance
If you have made a coffee, the coffee
machine will rinse the coffee pipework
automatically before switching off.
You can also start the Rinse appliance
function manually.
Rinse milk pipework
If you have made a drink with milk, the
coffee machine will rinse the milk
pipework automatically after a few
minutes. You can also start the Rinse
milk pipework function manually.
Cleaning the milk pipework
The milk pipework must be cleaned at
least once a week.
The Clean milk pipework maintenance
program lasts for approx.15minutes.
Tap the sensor control.
Select Clean milk pipework and tap OK.
The process will start and various
messages will appear in the display.
Follow the instructions in the display.
When Fill the water container with cleaning
agent and lukewarm water up to the
symbol and insert. Close the door. appears
in the display, proceed as follows.
Making a cleaning solution
For optimum cleaning results, we
recommend using the Miele Cleaning
Agent for the milk pipework.
The cleaning agent for milk pipes has
been specially developed for use with
Miele Coffee Machines and prevents
subsequent damage.
It is available to order from the Miele
online shop, from Miele Customer
Service, or from your Miele dealer.
Add 2sticks of the cleaning agent for
milk pipework to the water container.