Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and indicators
- Operation
- Before first use
- Filling the coffee bean container
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Cleaning the water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
Cleaning and care
66
Remove the water container and the brew
unit. Clean the interior of the machine. Rinse
the brew unit by hand and refit it with a
cleaning tablet in it. will appear in the
display.
Cleaning the brew unit and interior
The moving parts of the brew unit
are lubricated. Cleaning agents will
damage the brew unit.
Only clean the brew unit by hand
with warm water. Do not use any
cleaning agents.
To ensure good tasting coffee and to
prevent a build-up of bacteria in the
machine, remove and clean the brew
unit under running water once a
week.
Open the appliance door.
Remove the water container.
Press the button under the handle of
the brew unit and, while doing so,
turn the handle forward.
Pull the brew unit to the side first
and then pull out to the front. Tilt
the brew unit forward.
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
“Frequently asked questions”).
Once you have removed the brew
unit, do not change the position of
the handle on the brew unit.
Otherwise the brew unit cannot be
reinserted.
Clean the brew unit by hand under
warm running water without using
cleaning agent or liquid dish soap.