Operating & Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance Mode
- Water hardness
- MotionReact
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom program (Demo mode)
- Factory default settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Cleaning and care
71
Cleaning the milk valve (daily)
The milk-valve seal can be damaged
by objects with sharp edges or
similar.
Do not use any sharp-edged objects
(such as knives) to clean the milk
valve.
The milk valve is located under the
bean container on the left-hand side.
If allowed to dry, milk residues can
become encrusted on the stainless-
steel bolt. These crusty deposits are
difficult remove. Therefore, it is
important to carry out regular cleaning
after preparing milk.
Open the appliance door.
Clean the milk valve with a damp
cloth/microfiber cloth.
Close the appliance door.
Removing and cleaning the
milk valve (once a month)
If the following issues occur during milk
preparation, the milk valve may be
blocked: only hot milk is dispensed
instead of milk froth, the milk sprays
out. Clean the milk valve more often if
necessary.
The milk-valve cover should only be
cleaned by hand.
Open the appliance door.
Remove the bean container and
maintenance container on the left-
hand side.
Remove the main dispenser’s
stainless-steel cover.
Remove the milk-valve cover: press
on the recessed grip to unlock the
cover.
On the top right-hand side of the
cover, you will find a pin for swiveling
the cover out.