Operating & Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance Mode
- Water hardness
- MotionReact
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom program (Demo mode)
- Factory default settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Cleaning and care
77
Cleaning the interior, inside of
the machine door, and drip tray
Clean the interior and front of the
machine as part of the normal cleaning
process. For instance, if you remove the
water container, use this as an
opportunity to clean the area under the
water container at the same time.
The drip tray is located at the bottom on
the inside of the machine door.
Remove and empty the drip tray on a
regular basis. The drip tray is
dishwasher safe.
Open the machine door.
Remove and clean the drip tray.
Remove the following parts from the
interior:
- Water container
- Drip tray
- Maintenance container
- Brew unit
- Bean containers
Tip: Use your vacuum cleaner to
remove dry ground coffees.
Clean the interior and the inside of
the machine door by hand with a
clean and slightly damp cloth/
microfiber cloth. After cleaning, wipe
the interior and machine door dry
using a soft cloth.
Put all the parts back in place,
including the drip tray.
Close the machine door.
Cleaning the front of the
machine
If soiling is not removed promptly, it
could cause the surface to alter or
discolor.
Remove any soiling on the front of
the machine straight away.
Make sure that water cannot get
behind the display.
Clean the front of the machine after
manual descaling. If possible, wipe
up any spillages of descaling agent
immediately.
Tip: Before cleaning the control panel,
open the machine door. This will
prevent accidental operation.
Clean the front of the machine with a
clean and slightly damp cloth/
microfiber cloth. After cleaning, wipe
the surfaces dry using a soft cloth.