Operating & Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance Mode
- Water hardness
- MotionReact
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom program (Demo mode)
- Factory default settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Frequently Asked Questions
93
Problem Possible cause and solution
Check water intake and
empty the water container
The plumbed-water supply is not working.
Check whether the intake hose is kinked or the
water supply valve is not turned on completely.
Remove and empty the water container.
Insert the empty water container into the coffee
machine.
The following message is displayed: Please wait.
Water container filling. The water container fills up.
To turn off the plumbed-water connection, fill and
insert the water container. You can then select
Settings: Main Water| Off.
F233 The cup-rim sensor is not inserted or is incorrectly
inserted.
If the main dispenser is moving upward and the cup-
rim sensor is bumped, e.g., with a cup, the cup-rim
sensor loses its reference position.
Confirm the message withOK.
Reinstall the cup-rim sensor.
Cup-rim detection remains inactive and the main
dispenser stays in the top position until the coffee
machine is next switched on. Cup-rim detection is
reinitialized during the next switch-on operation.
F355, F357–F362 The bean system must be set up again, e.g., coffee
beans have possibly got jammed.
Open the machine door and remove both bean
containers from the coffee machine.
Close the machine door.
The bean system is set up.
Follow the instructions on the display.
F307or Remove the milk
valve and clean it
The milk valve is faulty.
Remove and clean the milk valve (see “Cleaning
and care – Removing and cleaning the milk valve”).