Operating & Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Operation
- Miele@home
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: Creating and processing drinks
- MyMiele
- MobileStart
- Settings
- Displaying and changing settings
- Language
- Time
- Date
- Start screen
- Timer
- Volume
- Display
- Lighting
- Info (display information)
- Fresh water
- Altitude
- Performance Mode
- Water hardness
- MotionReact
- System lock
- _
- Remote control
- SuperVision
- RemoteUpdate
- Software version
- Legal information
- Showroom program (Demo mode)
- Factory default settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Removing the brew unit and cleaning it by hand
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- Rinsing the machine
- Rinsing the milk pipework
- Maintenance program:
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic cleaning and descaling
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
- Copyrights and licenses
Frequently Asked Questions
95
Problem Possible cause and solution
The sensor buttons do
not respond.
The coffee machine can
no longer be operated.
There is an internal fault.
Disconnect the coffee machine from the electricity
supply by removing the plug from the socket or
switching off the breaker.
A fan can be heard even
though no drinks are
being prepared and the
coffee machine is
switched off.
This is not a fault.
Once a drink has been dispensed or the machine
has been switched off, the internal fan will continue
to run until the interior is sufficiently dehumidified.
The brew unit cannot be
removed.
The brew unit is not positioned correctly.
If necessary, turn the handle on the brew unit back
to the start position. Close the machine door.
Switch the coffee machine off.
Wait approx.1minute before switching the coffee
machine back on.
This will initialize the brew unit motor and put it back
into the start position.
If necessary, repeat these steps.
Drink dispensing is pre-
maturely aborted even
though there is a con-
tainer under the main
dispenser.
This is not a fault.
If the container has a very wide opening that
prevents the cup-rim sensor from making contact
with the edge of the container (e.g., in the case of a
very large cup), the drink will be canceled. Use a
different container or position the existing one so
that the sensor can detect the rim.