Operating and Installation Instructions Built-in Coffee System To prevent accidents and machine damage, you must read these instructions before installation or use. en-US M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ............................................................ 6 Preparing your appliance for an extended vacation....................................... 15 Guide to the appliance ..................................................................................... 18 Operation............................................................................................................ Touch display ..........................................................................
Contents Parameters......................................................................................................... Displaying and changing parameters .................................................................. Amount of coffee................................................................................................. Brewing temperature ........................................................................................... Pre-brewing ground coffee..................................
Contents Performance Mode.............................................................................................. Eco Mode ....................................................................................................... Barista Mode .................................................................................................. Latte Mode ..................................................................................................... Party Mode ...........................................
Contents The Miele Cleaning Cartridge.............................................................................. Replacing the cleaning cartridge......................................................................... Automatic descaling............................................................................................ The Miele Descaling Cartridge ............................................................................ Maintenance Timer......................................................
IMPORTANT SAFETY INSTRUCTIONS This coffee machine complies with all the stipulated safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on safety, installation, use, and maintenance. This prevents both personal injury and damage to the coffee machine.
IMPORTANT SAFETY INSTRUCTIONS Appropriate use This coffee machine is intended for household use. Do not use the coffee machine outdoors. This coffee machine must not be used at altitudes above 6560 ft (2000 m). The machine is intended only for household use and for the preparation of drinks such as espresso, cappuccino, latte macchiato, tea, etc. All other types of use are not permitted.
IMPORTANT SAFETY INSTRUCTIONS Safety with children Danger of burning and scalding at the dispensers. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensers. Keep the coffee system out of reach of children. Children must be kept away from the coffee machine unless they are constantly supervised. Children should be supervised when they are near the coffee system.
IMPORTANT SAFETY INSTRUCTIONS Technical safety Installation work or repairs should only be carried out by a Miele authorized technician. Unauthorized or incorrect installation work or repairs can pose considerable danger to users. A damaged coffee system could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine.
IMPORTANT SAFETY INSTRUCTIONS Ensure that the power cord will not be pinched or damaged by any sharp edges. To reduce the risk of injury, do not drape cord over the counter top or table top where it can be pulled on by children or tripped over unintentionally. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
IMPORTANT SAFETY INSTRUCTIONS For repairs, the coffee system must be disconnected from the electrical power supply. The coffee system is only disconnected from the power supply if - the circuit breaker has been tripped, or - the fuse is removed, or - the power cord is disconnected from the power supply. Pull the plug, not the cord, to disconnect the appliance from the power supply.
IMPORTANT SAFETY INSTRUCTIONS Plumbed water connection Do not connect the coffee system to a hot water supply. The non-return valve must be easily accessible when the coffee system is built in. The protective sleeve of the water intake hose must not be damaged or become kinked. This will cause it to leak.
IMPORTANT SAFETY INSTRUCTIONS Correct use Danger of burning and scalding at the dispensers. The liquids and steam dispensed are very hot. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the nozzles. Ensure that the main dispenser is clean and installed correctly. Before opening the door, remove any containers from the drip tray in the machine door.
IMPORTANT SAFETY INSTRUCTIONS Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins. Do not use oily beans or beans that have been treated with caramel, sugar, or other substances. Sugar and oil will damage the coffee system.
IMPORTANT SAFETY INSTRUCTIONS Preparing your appliance for an extended vacation If you elect to turn off the water to your home for an extended period of time, please note that this may not be enough to reduce the risk of a leak. To be completely safe, you must turn off the water supply to each individual appliance. This means under the sink for a dishwasher, at the laundry bib for your washer, etc. Accessories and parts Only use genuine Miele accessories.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. Clean the coffee machine and the milk flask daily, particularly before using for the first time. All parts of the milk system need to be cleaned thoroughly and regularly.
IMPORTANT SAFETY INSTRUCTIONS For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape, or other types of adhesive on the stainless steel surfaces. These will damage the stainless steel surfaces, causing them to lose their dirtrepellent protective coating. The finish on stainless steel surfaces is susceptible to scratching. Even magnets can cause scratching.
Guide to the appliance Front view 1 2 3 4 5 Remote 6 Back 7 Light 8 11 9 10 a On/Off button b Optical interface (for Miele Technical Service only) c Remote sensor button (MobileStart) d Movement sensor e Back sensor button f Touch display g Light sensor button h Door handle i Height-adjustable main dispenser with lighting j Drip-tray cover k Milk container 18
Guide to the appliance Interior view a Bean containers (Type A and Type C) b Milk valve c Height-adjustable main dispenser with lighting d Grinder setting e Bean container (Type B) f Fan outlet g Water container h Drip tray with lid i Brew unit j Grounds container k Maintenance container l Holders for cleaning and descaling cartridges (including adapters) m Drip tray 19
Operation Touch display The delicate touch display can be scratched by pointed or sharp objects, e.g., pens. Only touch the display with your fingers. The touch display is split into multiple areas. Miele 12:00 Ristretto Espresso Coffee Long Coffee Profiles The menu path appears on the left of the header. If you tap a menu name in the header, the display will switch to that menu. To switch to the start screen, tap . The time of day is shown on the right of the header.
Operation Operating actions All the selectable options are displayed in black or white according to your selected color scheme. Each time you tap a possible option, the relevant characters (word and/or symbol) light up orange. Selecting a menu option Tap the field or value you want in the display. Scrolling You can scroll left or right. Swipe across the screen. To do this, place your finger on the touch display and swipe it in the direction you want.
Operation OK Select the value you want: As soon as you enter a valid value, OK turns green. Use the arrow to delete the last entered number. Confirm with OK. Entering a name Letters are entered using a keyboard. It is best to select short names. Tap the letters or characters you want. Tip: Use the arrow to delete the last entered character. Tap Save. Displaying the context menu When you are in certain menus, a context menu can be displayed, e.g., for configuring drinks.
Operation Help Context-sensitive help is available for certain functions. In this case, Help appears in the bottom line. Tap Help to display information in text and pictures. Tap Close to return to the previous menu. Pull-down menu Among other things, the pull-down menu provides access to a schematic representation of the bean containers and to Expert Mode. Tap the orange line at the top edge of the screen and drag down with your finger. Active settings are highlighted in orange.
Operation Symbols in the display The display shows symbols as well as text, e.g., symbols for the various drinks. Some of these are explained below. Symbol Explanation This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the information. This symbol indicates the Settings menu and the Language menu option. This symbol appears if the system lock is activated. Operation is locked.
Miele@home Your coffee machine is equipped with an integrated WiFi module. To use this feature, you will need: - a WiFi network - the Miele app - a Miele user account You can create a user account via the Miele app. The Miele app will guide you through the process of connecting your coffee machine to your home WiFi network.
Before first use Before using for the first time Connect the coffee machine to the plumbed-water and power supplies. Install the coffee machine. Remove any notices from the machine. Remove the protective foil from the drip-tray cover. Clean the water container, bean containers, and the main dispenser. Have the following to hand (included with delivery) when setting the machine up for the first time: Tip: You can also choose to set up Miele@home for your coffee machine at a later point.
Before first use Selecting the water supply (Main Water) The coffee machine is intended to be plumbed into the water supply. You can choose between the following water supply options: - On: The water container will be filled automatically via the plumbed water connection. - Off: You must fill the water container manually. A message appears in the display to inform you of this. Select the option you want. Remove the maintenance container on the left-hand side.
Before first use Put the maintenance container back inside the coffee machine and close the machine door. The descaling cartridge will fill with water the next time the machine is switched off. Always wait for the coffee machine to switch itself off. Do not force the machine to switch off. Screw the cleaning cartridge into the holder upside down. Push the holder and cartridge into the coffee machine until the holder audibly clicks into place.
Before first use The coffee machine is now successfully set up for use. You can now fill the bean system. Push the bean containers all the way back into the coffee machine. Close the machine door. Setting up the bean system Tip: Make a note of each type of bean. After setting up the coffee machine, you will be prompted to set up the bean system. The coffee machine will assist you when first filling and naming the bean containers. After filling the bean containers, you can now name the types of beans.
Before first use Allocating the bean types Now you need to allocate the drinks to the types of beans. Selected drinks are highlighted in orange. Now select the drinks that are to be prepared with this type of bean. Confirm your selection with OK. Now it is time to allocate the next type of bean. The coffee drinks that have not yet been allocated are displayed. Select the drinks that are to be prepared with this type of bean. Confirm with OK.
The bean system Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each cup. Your coffee machine has a bean system with 3 bean containers which can be filled with different types of beans or even just one type. You can allocate bean types to individual coffee drinks as you wish. Alternatively, you can create profiles with your own coffee drinks and allocate other bean types to these drinks which are different to the standard Miele profiles.
The bean system If you switch from having identical names to having different names, you will then need to allocate coffee drinks to the newly named type of bean. Changing how the bean containers are allocated If you have created extra user profiles for coffee drinks in addition to the Miele standard profile, the bean types can be individually allocated to the drinks in each profile. Tap Change allocation. If you have set up 1 or more profiles and at least 1 coffee drink, first select the profile.
Filling the water tank Risk to health due to contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Water that gets left in the inlet hose can also impair the flavor if you do not make any drinks for a long time. Change the water in the water container every day. Discard the first full container of water if you have not made any drinks for a while. Open the appliance door.
Switching on and off Switching the coffee machine on Turning off for longer periods of time Tap the On/Off button . If the coffee machine is not going to be used for a while, e.g., if you are going on vacation, remember to do the following: The coffee machine heats up and rinses the pipework. Hot water will run out of the main dispenser. You can now make drinks. If the coffee machine is already at operating temperature, rinsing will not take place when the appliance is switched on.
Dispenser adjustment The main dispenser cannot be manually adjusted. Before making the drink, the main dispenser moves down and the cup sensor stops it at the optimum height for the cups or glasses being used. When the coffee machine is switched off, the main dispenser will be in the middle position. When a maintenance program is being carried out, the main dispenser will move to the height of the maintenance container or into a low maintenance position.
Preparing beverages Danger of burning and scalding at the dispensers. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Do not touch hot components. Making coffee with and without milk The following drinks can be made: - Ristretto is a concentrated, stronger espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water.
Preparing beverages Milk preparation Milk or milk alternatives (e.g., soy milk) containing added sugar can clog up the milk pipe and the rest of the milk pipework. Residues from unsuitable liquids can interfere with milk preparation. The milk used must not contain any additives. Only use pasteurized cow's milk. Tip: Using cold cow's milk (< 50°F/10°C) with a protein content of at least 3% will produce the perfect milk froth. You can select milk with a fat content according to your personal preference.
Preparing beverages Making a coffee drink Push the milk flask back into the coffee machine until it clicks into place. Tip: It is easier to remove the milk flask with both hands. Place a container under the main dispenser. Select a coffee drink. Preparation will begin and the coffee will be dispensed into the container from the main dispenser. Canceling a drink Press Stop or Cancel.
Preparing beverages DoubleShot Select the DoubleShot function if you would like a particularly strong and aromatic coffee. In this case, more coffee beans will be ground and brewed halfway through brewing. The shorter extraction time means that fewer unwanted aromas and bitter compounds will be released. DoubleShot can be activated for all drinks apart from “Ristretto” and “Long black”. Making a DoubleShot of coffee The symbol will appear while drinks are being made.
Preparing beverages Coffee Pot You can make several cups of coffee one after the other automatically with the Coffee Pot function (maximum of 1 liter). The drinks menu is displayed. Tip: Make sure that the bean and water containers have enough beans and water inside them before starting the Coffee Pot function. Place a sufficiently large container under the main dispenser. Select Coffee Pot. Tip: You will find Coffee Pot at the end of the drinks menu. Select the number of cups you want (3 to 8).
Preparing beverages - Chai Latte has its origins in traditional Ayurveda medicine as a black tea with typically Indian spices and milk. The milk mellows the spices and tops off the flavor experience. Dispensed temperature: approx. 210°F (97°C), brewing time: approx. 3 minutes - Herbal Tea is an aromatic infusion drink made up of dried leaves or fresh parts of plants. Dispensed temperature: approx. 210°F (97°C), brewing time: approx.
Preparing beverages The drinks menu is displayed. Tea pot Tap the Back sensor button. Select the setting you want. The Tea pot function allows you to make a large quantity of tea (maximum of 1 liter). The type of tea selected determines the preset temperature. Making tea The drinks menu is displayed. The drinks menu is displayed. Tip: Make sure that the water container has enough water inside it before you start making a pot of tea. Select Settings | Timer | TeaTimer.
Expert Mode In Expert mode, you can allocate a bean type temporarily and change the portion size while the drink is being made. The setting will not be saved and will only apply to the current drink. Activating and deactivating Expert mode Expert mode is located in the pull-down menu at the top edge of the screen. Tap the top edge of the screen in the middle and drag down with your finger to open Expert Mode. The schematic representation of the bean containers is displayed. Tap Expert Mode.
Grinder setting The grinder setting determines the contact time between the ground coffee and the water, known as the extraction time. When the ideal grinder setting is selected, the machine dispenses a perfect cup of coffee with a fine, hazelnut-brown crema. The grinder setting you select will be used for all coffee drinks. There are various ways to tell whether the coffee grinder is set correctly. The grinder setting is too coarse if the coffee or espresso is watery and tastes acidic.
Parameters Displaying and changing parameters You can individually adjust the following parameters for each drink: - Bean type - Amount of coffee - Brewing temperature - Pre-brewing You can adjust the brewing temperature for making tea and dispensing warm and hot water. The drinks menu is displayed. Tap the name of the drink you want and keep your finger on it until the associated context menu appears. Select Parameters. The Parameters menu is displayed. Select the parameter you want.
Parameters Type of beans You can display which type of bean is currently being used for this coffee drink or change which bean container is allocated to it.
Portion size You can adjust the amount of water for all coffee drinks, hot water, and types of tea. The strength of the coffee is determined by the ratio between the amount of ground coffee and water. If the coffee is brewed with more water but with the same amount of ground coffee, the coffee will taste milder and thinner. If you reduce the amount of water, you will get a stronger and more powerful coffee.
Resetting drinks You can reset portion sizes and parameters to their factory default settings for individual drinks or for all drinks. The drinks menu is displayed. Tap the drink you want and keep your finger on it until the context menu opens. Select Reset and confirm with Yes. The portion size and parameters are reset to their factory default settings. The allocated bean type remains stored.
Profiles In addition to the Miele drinks menu (Miele profile), you can create individual profiles to cater for different tastes and preferences. Within the profile, you can adjust the portion sizes and parameters individually for all drinks. The name of the current profile is shown in the top left of the display. Creating a profile The drinks menu is displayed.
Profiles: Creating and processing drinks You can save frequently made drinks in a profile with your own individual settings (see “Profiles”). Tap the name of the drink and keep your finger on it until the context menu appears. You can also change the names of your drinks and delete any unwanted drinks from your profile. You can save a maximum of 9 drinks in a profile. Edit the entry as required. Creating a drink You can create new drinks based on existing drinks. The drinks menu is displayed.
MyMiele You can display frequently made drinks, drinks from profiles, and preferred maintenance programs on the MyMiele screen. Tip: You can also set menu options that you have entered in MyMiele as your start screen (see “Settings – Start screen”). The main menu is displayed. Tap MyMiele. You can now configure MyMiele. MyMiele: Adding an entry Tap Add entry. You can now add entries from the following menus: - Drinks - Profiles - Maintenance Select an entry. Confirm the message with OK.
MobileStart Remote With MobileStart Remote you can, for example, start making a drink via the Miele app. You will only be able to use MobileStart if Miele@home has been set up for your coffee machine. Danger of burning and scalding at the dispensers. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the main dispenser or touch hot components.
Settings You can personalize your coffee machine by adapting the factory default settings to suit your requirements. - Night dimming: To save energy, the time is displayed from 5:00 am to 11:00 pm only. Displaying and changing settings Clock type Tap the Back sensor button. The time of day can be displayed in analog (clock face) or digital (hours: minutes plus date) format when the coffee machine is switched off. Select Settings. Clock format Select the option you want to change.
Settings Start screen You can choose which screen appears when the coffee machine is switched on. For instance, you can use MyMiele to display a personalized menu (see “MyMiele”). The new start screen will appear when the coffee machine is next switched on. The drinks menu is set as the start screen by default. Timer Appliance timer You can set different times for the timer at the weekend (Sat and Sun) and/or from Monday to Friday (Mon - Fri).
Settings Maintenance timer Use the Maintenance Timer to select any start time you like for the automatic maintenance programs (see “Automatic cleaning and descaling – Maintenance Timer”). TeaTimer You can use the TeaTimer to start a kitchen timer when making tea (see “Making drinks – TeaTimer”). Volume You can set the volume of the buzzer and keypad tones in the bar chart. Display Brightness The display brightness is adjusted via a bar with seven segments.
Settings Performance Mode You can select the appropriate Performance Mode for how you use your machine. Eco Mode is set by default. Eco Mode Eco Mode is an energy-saving mode. The system does not heat up until someone starts making a drink. Before switching off the coffee machine, empty the drip tray and fill the water container so that any pending maintenance programs are able to run. Clean the coffee machine thoroughly after intensive use, particularly the milk pipework.
Settings If you are using bottled drinking water, e.g., mineral water, select settings according to the calcium content. The calcium content is given on the label of 2+ the bottle in mg/l Ca or ppm (mg 2+ Ca /l). Do not use carbonated water. The hardness level is set to 21.8 gpg (21°dH) by default.
Settings MotionReact The movement sensor detects when you approach the touch display with your hand or body. You can activate the following functions individually: - Switch the light on: You can decide whether the light should come on when the coffee machine is on or off. - Acknowledge buzzer: Audible signal sounds are suppressed, e.g., in the event of the message Fill and replace the water container. - Switch the appliance on: The start screen is displayed. The movement sensor is deactivated by default.
Settings The network configuration should be reset whenever the coffee machine is being disposed of or sold, or if a used coffee machine is being put into operation. This is the only way to ensure that all personal data has been removed and the previous owner will no longer be able to access the coffee machine. * This menu option appears if Miele@home has been set up and the coffee machine has – where applicable – been connected to a WiFi network.
Settings Activating/deactivating Software version The RemoteUpdate function is activated by default. Available updates will be downloaded automatically but will only be installed if you initiate installation manually. The “Software version” menu option is intended for Miele Technical Service. You do not need this information for domestic use. Deactivate RemoteUpdate if you do not want any updates to be downloaded automatically.
Settings The following will not be reset: - The number of drinks and the machine status (No. of portions until machine needs descaling, ... degreasing the brew unit) - Language - Time and date - Profiles and their associated drinks (the allocation of bean types to drinks is reset) - Miele@home The Maintenance timer is reset to 2 am.
Cleaning and care Risk to health due to inadequate cleaning. Heat and moisture inside the coffee machine can cause coffee residues to become moldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.
Cleaning and care Clean by hand or in dishwasher The brew unit is not dishwasher safe. Only clean the brew unit by hand with warm water. Do not use any cleaning agents. The following components must be cleaned by hand only: Risk of damage as a result of excessively high dishwasher temperatures. Components may be ruined (e.g., may become warped) if washed in a dishwasher at temperatures higher than 130°F (55°C).
Cleaning and care Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep away from the area underneath the dispensers when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Cleaning and care Cleaning the drip tray and grounds container Danger of burning and scalding on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. If the pipework has just been rinsed, wait a while before removing the drip tray. Please be aware that water in the drip tray can also be very hot. Do not touch hot components.
Cleaning and care Clean the drip tray, lid, and grounds container in the dishwasher or wash them by hand using warm water and a little liquid dish soap. Reassembling the drip tray Dry all parts. Clean the drip-tray recess inside of the coffee machine. Cleaning contacts Attach the drip-tray lid as follows: slide the lid under the lug next to the contacts and apply pressure to the lid until the catches at the sides audibly click into place.
Cleaning and care Cleaning the drip-tray cover Remove the drip-tray cover as follows: Apply pressure to the rear edge so that the cover tips forward and you can remove it easily. The drip tray can be cleaned in the dishwasher, or by hand using warm water and a little liquid dish soap. Dry the drip-tray cover. Replace the drip-tray cover. Water container Clean and dry the surface that the water container sits on.
Cleaning and care Detach the milk pipework from the dispensing unit as follows: pull the tab to the left. Do not remove the milk pipework connecting piece. If necessary, clean the connecting piece with the cleaning brush. 68 Grip the dispensing unit by the sides and pull it down to remove it. Take the dispensing unit apart, separating it into 3 components: the Y-piece, the spouts, and the holder. Clean all parts thoroughly.
Cleaning and care Reinstall the stainless-steel cover. Close the appliance door. Fit cover to main dispenser will appear in the display. Confirm the message with OK. Cleaning the cup-rim sensor The cup-rim sensor is located under the main dispenser. Clean the area around the main dispenser with a damp cloth. Clean the cup-rim sensor at least once a week and more often if heavily soiled.
Cleaning and care Cleaning the milk flask with lid The milk flask should be taken apart and cleaned every day after use. Both the lid and the glass flask can be cleaned in the dishwasher, or by hand using warm water and a little liquid dish soap. Remove and empty the milk flask. Clean the milk-flask holder on the coffee machine with a damp cloth. Cleaning the milk valve (daily) The milk-valve seal can be damaged by objects with sharp edges or similar.
Cleaning and care Open the appliance door. Clean the milk valve with a damp cloth/microfiber cloth. On the top right-hand side of the cover, you will find a pin for swiveling the cover out. Close the appliance door. Removing and cleaning the milk valve (once a month) If the following issues occur during milk preparation, the milk valve may be blocked: only hot milk is dispensed instead of milk froth, the milk sprays out. Clean the milk valve more often if necessary.
Cleaning and care Press the retainers on the left and right-hand sides of the milk-valve holder and pull the holder forward to remove it. Pull the stainless-steel bolt upward and out. Clean the individual components of the milk valve in the dishwasher. Tip: If there are any dry milk residues on the front, soak the stainless-steel bolt in warm water and a little liquid dish soap. Installing the milk valve Insert the stainless-steel bolt from above.
Cleaning and care Connect together the angular molded hose and longer milk pipework. Start by attaching the top of the molded hose to the main dispenser. The black connecting piece should be pointing to the rear. Tip: If necessary, screw the milk pipework backward at the connecting piece on the right-hand side. Then, connect the bottom end of the molded hose to the dispensing unit. Insert the milk pipework into the milk valve on the left and right-hand sides.
Cleaning and care Cleaning the bean containers Risk of damage from incorrect use and cleaning. Immersing the bean containers in liquids can result in malfunctions. If they are taken apart, bits may break off or the mechanism may no longer work properly once they are reassembled. Do not disassemble the bean containers. Do not immerse the bean containers in liquids, e.g., soapy water. Coffee beans contain oils which can deposit on the walls of the bean containers and hinder the flow of the beans.
Cleaning and care Removing the brew unit and cleaning it by hand The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit. Only clean the brew unit by hand with warm water. Do not use any cleaning agents. Remove and clean the brew unit once a week. Also clean the area below the brew unit once a week. Open the appliance door. Remove the water container. Pull the brew unit to the side first and then pull out to the front . Tilt the brew unit forward .
Cleaning and care Replacing the brew unit Proceed in the reverse order: push the brew unit back into the coffee machine. Tilt the brew unit forward a little when doing this. Wipe any remaining coffee off the two filters. One filter is located in the funnel. The other filter can be found to the left of the funnel. Dry the funnel to prevent ground coffee sticking to it the next time a coffee is made. Clean the interior of the machine Use your vacuum cleaner to remove dry coffee grounds.
Cleaning and care Clean the interior and the inside of Cleaning the interior, inside of the machine door by hand with a the machine door, and drip tray Clean the interior and front of the machine as part of the normal cleaning process. For instance, if you remove the water container, use this as an opportunity to clean the area under the water container at the same time. clean and slightly damp cloth/ microfiber cloth. After cleaning, wipe the interior and machine door dry using a soft cloth.
Cleaning and care Maintenance programs Rinsing the milk pipework The coffee machine has the following maintenance programs: If you have made a drink with milk, the coffee machine will rinse the milk pipework automatically after a few minutes. You can also start the Rinse the milk pipework function manually.
Cleaning and care For optimum cleaning results, it is recommended to use the Miele Cleaning Agent for milk pipework. The cleaning agent for milk pipework has been specially developed for use with Miele Coffee Machines and prevents subsequent damage. For each cleaning process, you will need 2 sticks of the cleaning agent for milk pipework. It is available to order from the Miele online shop, from Miele Customer Service, or from your Miele dealer. Clean the milk pipework will appear in the display.
Cleaning and care Degreasing the brew unit and cleaning the interior Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. It must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. You can run the maintenance program with the Miele Cleaning Cartridge or with cleaning tablets for degreasing the brew unit. The maintenance program lasts for approx. 10 minutes.
Cleaning and care Pull the brew unit to the side first and then pull out to the front . Tilt the brew unit forward . If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see “Frequently asked questions”). Once you have removed the brew unit, do not change the position of the handle on the brew unit. Otherwise the brew unit cannot be reinserted.
Cleaning and care Dropping a cleaning tablet into the brew unit The cleaning process is complete when the drinks menu appears. Descaling the appliance Risk of damage from splashes from the descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages immediately when descaling. Drop a cleaning tablet into the top of the brew unit (arrow). Push the brew unit containing the cleaning tablet back into the coffee machine.
Cleaning and care Confirm the message with OK. When the number of remaining portions reaches 0, the coffee machine will lock. You can switch the coffee machine off if you do not want to carry out the descaling program at this point. You cannot make any drinks until the machine has been descaled. The descaling tablets are available to order from the Miele online shop, from Miele Customer Service, or from your Miele dealer. You will need 2 descaling tablets.
Cleaning and care Remove the water container and rinse it thoroughly with clean water. Ensure that no descaling solution residue remains in the water container. Fill the water container with tap water. The descaling process is complete when the drinks menu appears.
Automatic cleaning and descaling Risk of damage from spilled cleaning and descaling solution. Sensitive surfaces and/or natural floors can suffer damage. One way to catch the cleaning and descaling solution is to place the maintenance container under the main dispenser before switching off the machine. Clear up any spillages of cleaning and descaling solution.
Automatic cleaning and descaling - If filling the water container manually: the water container is inserted and is filled with water at least up to the mark. - Carry out the instructions which appear in the display before switching off, e.g., Empty and refit the drip tray and the waste container. - The machine door is closed when the program is started. - The coffee machine is switched off.
Automatic cleaning and descaling The first message will appear when the cartridge is approx. 25% full. Cleaning cartridges are available to order from the Miele online shop, from Miele Technical Service, or from your Miele dealer. If no cleaning cartridge has been inserted or if the inserted cartridge is empty or has expired, the milk pipework and brew unit must be cleaned manually.
Automatic cleaning and descaling Automatic descaling Automatic descaling takes approx. 12 minutes. Screw the new cartridge into the holder upside down. Push the holder and cartridge into the coffee machine until the holder audibly clicks into place. Put the maintenance container back inside the coffee machine and close the machine door.
Automatic cleaning and descaling The descaling agent comes in the form of tablets in the descaling cartridge. The cartridge is filled with water when it is placed in the machine. The tablets gradually dissolve over time. - It should be transported with care and upright. Avoid shaking it. Shaking or turning upside down reduces the shelf life or damages the cartridge. The Miele Descaling Cartridge will last for up to 12 months of automatic descaling, depending on how often the coffee machine is used.
Automatic cleaning and descaling If you do not want to insert a descaling cartridge, seal the system with the adapter. Tip: You can seal the descaling cartridge with the cap that can be found on the cartridge. This cap can be easily detached by snapping it off. Insert the adapter in place of the cartridge. Dispose of the cartridge with your household waste. Maintenance Timer Inserting the descaling cartridge Insert the cartridge and push it upward as far as it will go.
Automatic cleaning and descaling The start time is saved. From now on, the automatic maintenance programs will commence at the desired time each day. Canceling automatic cleaning and descaling You can cancel the automatic cleaning programs during the holding time. If the automatic cleaning program is not performed five times in a row, the dispensing of drinks is blocked. You will only be able to make drinks again once the the brew unit has been degreased and/or the milk pipework has been cleaned.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Messages in the display Error messages must be confirmed with OK, otherwise the message may reappear in the display even though the problem has been remedied.
Frequently Asked Questions Problem Possible cause and solution F73 or The brew unit cannot be positioned correctly or is soiled. It is not possible to press the ground coffee. Check whether you can remove the brew unit. If you can remove the brew unit, rinse it under running water. Check the brew unit Push the coffee ejector of the brew unit into the correct position (see image). Replace the water container in the coffee machine and close the door. Do not insert the brew unit.
Frequently Asked Questions Problem Check water intake and empty the water container Possible cause and solution The plumbed-water supply is not working. Check whether the intake hose is kinked or the water supply valve is not turned on completely. Remove and empty the water container. Insert the empty water container into the coffee machine. The following message is displayed: Please wait. Water container filling. The water container fills up.
Frequently Asked Questions Unusual performance of the coffee system Problem Possible cause and solution The display remains dark when the coffee machine is turned on using the On/Off button . The On/Off button was not held for long enough. Tap and hold the On/Off button for at least 3 seconds. The plug is not properly plugged into the electrical socket. Insert the plug into the electrical socket. The fuse has tripped because the coffee machine, voltage, or another appliance is defective.
Frequently Asked Questions Problem Possible cause and solution The sensor buttons do There is an internal fault. not respond. Disconnect the coffee machine from the electricity The coffee machine can supply by removing the plug from the socket or no longer be operated. switching off the breaker. A fan can be heard even though no drinks are being prepared and the coffee machine is switched off. This is not a fault.
Frequently Asked Questions Problem Possible cause and solution Coffee dispensing is repeatedly interrupted and the message Fill the bean container appears in the display. This is not a fault. The brew unit has not detected the ground coffee. Certain types of coffee produce a small amount of coffee when they are ground. Usually the grinder is set too fine and the amount is set to minimum. Confirm the message with OK.
Frequently Asked Questions Problem Possible cause and solution The display is hard to see or not legible. The display brightness has been set too low. Change this setting (see “Settings”). The display lights up but the coffee machine does not heat up and no drinks are made. The Demo mode for demonstrating the coffee machine in stores and showrooms has been activated. Deactivate Demo mode (see “Settings”).
Frequently Asked Questions Faults with automatic cleaning and/or descaling Problem Possible cause and solution After switching on, a message appears informing you that automatic cleaning and/or descaling could not be carried out. The coffee machines was not ready for operation: all removable parts, such as the water container, drip tray, brew unit, or main dispenser must be installed. The water container was not filled with drinking water at least up to the descaling symbol .
Frequently Asked Questions Problem Possible cause and solution When the machine is switched on, one of these messages appears: Automatic cleaning Automatic cleaning could not be carried out five times. could not be carried out. Start Automatic cleaning (duration min.) now? Otherwise Automatic cleaning will be permanently turned off. or: Automatic maintenance could not be carried out. Carry out the Automatic cleaning part of the Automatic maintenance program (duration min.
Frequently Asked Questions Unsatisfactory results Problem Possible cause and solution The coffee is not hot enough. The cup has not been pre-heated. The smaller the cup and the thicker its walls, the more important it is to pre-heat it. Pre-heat the cup with hot water, for example. The brewing temperature is set too low. Set a higher brewing temperature. The filters in the brew unit are blocked. Remove the brew unit and clean it by hand. Degrease the brew unit.
Frequently Asked Questions Problem Possible cause and solution The coffee tastes weak. The coffee grounds in the grounds container are sludgy and grainy. Less coffee is being brewed because insufficient coffee beans are getting into the grinder. Have you used a dark roast? This type of coffee bean is often oily. These oils can cling to the walls of the coffee bean containers and hinder the flow of beans.
Frequently Asked Questions Problem Possible cause and solution Coffee drinks trickle/ The brew unit is blocked because the coffee machine dribble slowly out of the has been used very intensively. And/or the brew unit main dispenser. has not been regularly removed and cleaned by hand. If a cleaning cartridge is inserted, start by switching off Automatic Cleaning (Settings | Automatic Cleaning).
Service and warranty Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. You can book a Miele Service Call online at www.miele.com/service. Contact information for Miele Customer Service can be found at the end of this document. Please quote the model identifier and serial number of your appliance (SN) when contacting Miele Customer Service. Both pieces of information can be found on the data plate.
Accessories These products and other useful accessories can be ordered via the Miele Webstore, from Miele Service or from your Miele dealer. - Microfiber cloth for removing finger marks and light soiling - Cleaning agent for milk pipework for cleaning the milk system - Cleaning tablets for degreasing the brew unit - AutoCleaner for automatically cleaning the milk pipework and brew unit - Descaling cartridge for automatic descaling - Descaling tabs for manual descaling - CJ Jug 1.
Packaging material / Disposal of old machine Disposal of the packing material The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of your old appliance Old electrical and electronic appliances often still contain valuable materials.
*INSTALLATION* Installation Plumbed water connection Risk of injury and appliance damage if appliance is not connected properly. Failing to connect the appliance properly can result in personal injury and/or material damage. The appliance may only be connected to the plumbed-water connection by qualified specialists. Risk to health and risk of damage due to contaminated water.
*INSTALLATION* Installation Make sure that the water supply valve remains accessible after the machine has been installed. To connect the coffee machine to the water supply, a water supply valve with a 3/4" connection is required. Check that a seal is present. Install one if necessary. Connect the stainless-steel hose to the water supply valve. Ensure that it is screwed into position correctly. Turn on the water supply valve slowly and check for leaks at the plumbedwater connection.
*INSTALLATION* Installation Electrical connection Before connecting the coffee machine, make sure that the connection data on the data tag (voltage and frequency) matches the domestic electrical supply. This data must match to prevent the coffee machine from being damaged. If in any doubt, consult a qualified electrician. equivalent measures in the installation. As described, for example, in the current version of VDE-AR-E 2510-2. The coffee machine must not be used with energy saving plugs.
*INSTALLATION* Installation Installation dimensions Installation in a tall cabinet A minimum installation height of 33 7/16" (850 mm) must be observed. Combination with other Miele Built-in Appliances is possible. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them. If the machine is to be combined with a suitable built-in dishware/ food-warming drawer, no shelf is required in between.
*INSTALLATION* Installation Installation and connections A Cut-out (at least 20"/508 mm wide) in the niche floor of the tall cabinet for power cord and ventilation E Electrical connection W Plumbed-water connection No electrical or plumbed-water connection in this area 111
*INSTALLATION* Installation Building in the coffee machine Danger of injury due to incorrect operation. A machine that has not been built in is not safe and can cause injuries. Do not operate the coffee machine unless it has been built in. Danger of damage due to incorrect operation. If the ambient temperature range is not observed, the coffee machine may not function properly. The coffee machine may only be operated within an ambient temperature range of +60°F to +100°F (+16°C to +38°C).
*INSTALLATION* Installation Tip: We recommend providing a place to sit the coffee machine which is the same height as the building-in niche. This will make it easier to connect the machine to the electricity and water supply. Connecting the plumbed water and electricity supplies Observe the information under “Plumbed water connection” and “Electrical connection”. Connect the coffee machine to the plumbed water and electricity supplies.
*INSTALLATION* Installation The door opening limiters can be removed, allowing you to increase the opening angle to approx. 170°. This makes it easier to remove the bean containers, for example. Removing the door opening limiters Make sure that sufficient space is available for the larger door opening angle and that the machine door is not going to hit an adjacent wall. Remove the door opening limiters from the hinges, e.g., by prizing them out with a screwdriver.
FCC Declaration of Conformity Electricity consumption in standby: < 1.0 W Electricity consumption in networked standby: < 1.4 W Frequency range 2.412 GHz – 2.462 GHz Maximum transmitting power < 100 mW WiFi module EK037 Contains FCC ID: 2ACUWEK037 Contains IC: 5669C-EK037 This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).
Copyrights and licenses Miele uses their own and third party software which is not subject to any so-called open source license for the operation and control of the device/appliance. This software/these software components are protected by copyright. The copyright powers of Miele and third parties have to be respected. Furthermore, this device/appliance contains software components which are distributed under open source license conditions.
Please have the model and serial number of your appliance available when contacting Customer Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 www.mieleusa.com Customer Support Phone: 888-99-MIELE (64353) info@mieleusa.com International Headquarters Miele & Cie. KG Carl-Miele-Straße 29 33332 Gütersloh Germany Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
CVA 7845 en-US M.-Nr.
