Technical data

a 2 protective shields
prevent scratches to the chimney
during installation.
b 1 vent collar
for use with 6" (150 mm) exhaust
ducting
c 1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
d Upper retaining plate secures the
chimney extension.
e Middle retaining plate for additional
stability of the chimney.
f Lower retaining plate secures the
canopy and motor assembly.
g Installation kit for recirculation
mode contains diverter, 2 grilles, a
hose and hose clips (optional
accessory)
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.
Installation instruction diagram
8 large headed screws5x40mm
for securing the retaining plates and the
canopy.
(S8 wall anchors included in the
packaging are not for use in USA / CDN.)
2 M 6 locking nuts for securing the
motor assembly.
2 screws 3.9 x 7.5 mm for securing the
chimney.
2 screws M4 with locking nuts and
plastic washers for securing the glass
canopy.
1 screw cover
1 lever for disassembling the chimney
Installation
33