Operating instructions/Installation instructions

Installation
*INSTALLATION*
43
Installation recommendations
- When deciding on the safety distance
between the hob and cooker hood,
please note that a distance of
650mm above electric cookers/hobs
may be preferable to give more
working space under the hood.
- Account should also be taken of the
height of the person who will be
using the hood most often. They
should have sufficient space to work
comfortably at the hob, and be able
to reach the cooker hood controls
with ease.
- Please be aware that if positioned too
high, extraction will be inefficient.
- To achieve optimum vapour
extraction, the cooker hood must be
centred over the hob, not to the side
or behind it.
- The hob should be no wider than the
cooker hood, and if possible, it
should be narrower.
- The installation area must be easily
accessible. The cooker hood should
be easily accessible and easy to
dismantle in the event that service is
required. This should be taken into
consideration when planning the
position of cupboards, shelves,
ceilings or features in the vicinity of
the cooker hood.
Installation materials
1vent connection
for exhaust ducting 150mm.
1connector for flat ducting to the rear
or the side (only for EXTA models)
4M5x40mm screws, 4washers,
4M5 nuts for securing the cooker
hood to an interim shelf.
10M4x8mm screws for securing the
cooker hood.
4M4x12mm screws for additional
securing of the cooker hood to uneven
surfaces.